ISOBUS (9-pin/12 V)

MüllerElektronik Adaptor cable ME terminal/signal socket For keypad terminal

Version: Connection, serial interface for the purpose of using the tractor ECU | Number of pins: 9/7

GRANIT Socket 7-pin

Version: ISO 11786 | Number of pins: 7

GRANIT Plug 7-pin

Version: 12 V, DIN ISO 11786, IP65 Current load 10 A Cable plug housing PA 6.6 Max. cross section 0.75 mm² Strain relief for...

ERICH JAEGER Contact seal with PWR contacts Crimp contacts, for max. core cross section of 6.0 mm²

Version: ISOBUS (IBIC) 12 V, green | Additional information: ISO 11783-2 | Number of pins: 9

GRANIT CPC plug housing AMP Tyco

Version: Connector type: circular connector | Additional information: Plug housing shape: rectangular With flange | Number of...

MüllerElektronik ISOBUS socket

Version: Socket for ISOBUS - complete with protective screw cap | Additional information: ISO 11783-2 | Number of pins: 9

ERICH JAEGER Plug set

Version: ECU/pass-through, tractor side | Additional information: ISO 11783-2, Contact sleeves for different connection cross...

ERICH JAEGER Contact seal with PWR contacts Crimp contacts, for max. core cross section of 16.0 mm²

Version: ISOBUS (IBIC) 12 V, red | Additional information: ISO 11783-2 | Number of pins: 9

ERICH JAEGER ISOBUS (IBIC) cable 5.0 m | 10.0 mm² | 9-pin

Number of pins: 9 | Cross section (mm²): 10.0 | Length (mm): 5000 | Version: Plug + open end

ERICH JAEGER ISOBUS IBBC socket, passive

Additional information: ISO 11783-2, ISOBUS (IBBC), Terminating resistor 150 (2 x 75) | Number of pins: 9 | Length (mm): 91,5...

ERICH JAEGER Sealing cap, ISOBUS (IBIC) plug For 9-pin plug

Version: For 9-pin ISOBUS IBC plug | Additional information: ISO 11783-2 | Length (mm): 201 | Width (mm): 40 | Height (mm): 1...

ERICH JAEGER ISOBUS (IBIC) plug 12V 16 mm² | 9-pin

ERICH JAEGER Punched contact sleeves For 0.5-1.0 mm² cable cross section, suitable for 5060010031 and 5060010032

Version: For plug housing 4P ISOBUS socket (IBBC - Breakaway Connector), tractor side | Additional information: ISO 11783-2, ...

ERICH JAEGER Contact seal with PWR contacts Crimp contacts, for max. core cross section of 10.0 mm²

Version: ISOBUS (IBIC) 12 V, blue | Additional information: ISO 11783-2 | Number of pins: 9

ERICH JAEGER ISOBUS IBBC socket, active

Additional information: ISO 11783-2, ISOBUS (IBBC), Terminating resistor 150 (2 x 75) | Number of pins: 9 | Length (mm): 91,5...

GRANIT CPC plug housing AMP Tyco

Version: Connector type: circular connector | Additional information: Without flange | Number of pins: 9

MüllerElektronik Screw cap for ISOBUS socket

Version: Active (Master), Implement Connector 6 mm²

GRANIT ISOBUS (IBIC) cable 2.0 m | 10.0 mm² | 9-pin

Number of pins: 9 | Cross section (mm²): 10.0 | Length (mm): 2000 | Version: Plug + plug

ARAG Adaptor cable, speed measurement ISO11786

Version: Connection of 3-pin AMP for the purpose of using the tractor ECU, 5 m | Number of pins: 3/7

ERICH JAEGER ISOBUS (IBIC) plug 12V 6 mm², 9-pin

ERICH JAEGER ISOBUS parking socket Suitable for all ISOBUS 9P plugs

Version: Breakaway Connector - suitable for all ISOBUS 9P plugs | Additional information: ISO 11783-2 | Number of pins: 9 | L...

ERICH JAEGER ISOBUS (IBIC) plug 12V 10 mm² | 9-pin

GRANIT Cap for AMP Tyco

Version: Connector type: circular connector/round push-on contact | Additional information: With terminal holder | Number of ...

GRANIT CPC socket housing AMP Tyco

Version: 3-pin, 6.3 mm for alternator and ext. Regulator | Additional information: With coupling disc | Number of pins: 9