Menu
EUR

Fendt 818 Vario tractor parts & technical data

Keep the Fendt 818 Vario going: more than 700 items for the Fendt 800 series model are listed here, including lighting, electrics and trailer couplings.

706 parts found for Fendt 818 Vario tractor parts & technical data
Show:
High-pressure pump Fendt, Deutz-Fahr
€360,75 €298,14 €342,70 €283,22
You save 5%
GRANIT Injection line cylinder 1, 2 and 3
€44,10 €36,45 €41,85 €34,59
You save 5%
GRAMMER Tractor seat Maximo XT Dynamic Plus MSG97AL/741 Fendt
GRAMMER
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Optional. Track gauge: 381 mm. Seat... More
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery typ...
€4.700,98 €3.885,11 €4.465,90 €3.690,83
You save 5%
Gas strut roof gap 100 N, 125 mm, stroke 22 mm Fendt
suitable for: Dachlucke. Newtons: 100. A: 125 mm. B: 52 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 6 mm. d2: 15 mm. Stroke: 22 mm. To fit: roof hatch. More
suitable for: Dachlucke. Newtons: 100. A: 125 mm. B: 52 mm. C: 10 mm. ...
€84,58 €69,90 €80,35 €66,41
You save 5%
GRANIT Gas strut hood 30 N, 145 mm, stroke 30 mm Fendt
GRANIT
Newtons: 30. A: 145 mm. B: 80 mm. C: 6 mm. D: 6 mm. Stroke: 30 mm. d1: 6 mm. d2: 15,6 mm. To fit: Bonnet. Form: 1. More
Newtons: 30. A: 145 mm. B: 80 mm. C: 6 mm. D: 6 mm. Stroke: 30 mm. d1:...
€41,94 €34,66 €39,80 €32,89
You save 5%
Door lock, right Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€54,86 €45,34 €52,10 €43,06
You save 5%
GRANIT Washer rear screen hinge Fendt
Oil seal 72 x 90 x 10 mm Fendt Favorit 711-716, Fendt 711-820
Dimensions: 72 x 90 x 10 mm. More
Dimensions: 72 x 90 x 10 mm.
€36,24 €29,95 €34,40 €28,43
You save 5%
Lift arm left Fendt series 800, 815-818
€935,33 €773,00 €888,55 €734,34
You save 5%
Rod end lower Fendt
€253,50 €209,50 €240,80 €199,01
You save 5%
CBM Mechanical top link cat. 3, 700 / 1020 mm, M36 x 3, heavy-duty version
CBM
Top link type: mechanical. Type: Tail hook/clevis joint. A cat.: 3 / 32. B cat.: 3 / 32. D: 700 / 1020 mm. C: 460 mm. I: M36 x 3 mm. Version: Heavy-du... More
Top link type: mechanical. Type: Tail hook/clevis joint. A cat.: 3 / 3...
€397,91 €328,85 €378,00 €312,40
You save 5%
GRANIT Graduated tube Fendt
€224,82 €185,80 €213,55 €176,49
You save 5%
GRANIT Bracket front Fendt Farmer 240 S (Typ 294), Xylon 524
€39,08 €32,30 €37,10 €30,66
You save 5%
Mechanical top link cat. 3, M36 x 3, 700 - 1020 mm, heavy-duty version
I: M36 x 3 mm. A cat.: 3 / 32. B cat.: 3 / 32. C: 460 mm. D: 700 / 1020 mm. K: 51 mm. L: 63 mm. Version: Heavy-duty version. Type: Tail hook/clevis jo... More
I: M36 x 3 mm. A cat.: 3 / 32. B cat.: 3 / 32. C: 460 mm. D: 700 / 102...
€346,48 €286,35 €313,45 €259,05
You save 10%
GRANIT Top link cat. 2, M30 x 3,5, 515 - 755 mm, hook/threaded spindle
GRANIT
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515 / 755 mm. E: 75 mm. H: 51 mm. Version: Standard. Type: Tail hook/ball joint. To... More
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515...
€175,33 €144,90 €158,60 €131,07
You save 10%
GRANIT Gas strut door or hood 250 N, 325 mm Fendt
GRANIT
suitable for: Tür- oder Motorhaube. Newtons: 250. A: 325 mm. B: 160 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or bonnet. Menke no.: 59193. More
suitable for: Tür- oder Motorhaube. Newtons: 250. A: 325 mm. B: 160 m...
€41,19 €34,04 €37,25 €30,79
You save 10%
Skid hood Fendt
€9,40 €7,77
GRANIT Compression spring hood Fendt
Intermediate part for fender 145 mm Fendt
Dimensions: 145 mm. More
Dimensions: 145 mm.
€334,91 €276,79 €303,00 €250,41
You save 10%
Holder for chock Fendt
Showing 529 - 552 of 706

Fendt 818 Vario parts, sorted by Typ number

The Fendt 818 Vario was made in more than one version, and the identification plate tells you which one you have. Next to the serial number it shows a Typ number. This page brings together more than 700 parts that fit the 818 Vario across both versions. Once you know your Typ number, the page for that version narrows things down to the parts meant for it:

If the plate has faded or been painted over, take the old part to hand. Starter motors and alternators usually carry a label or stamped reference number, and many moulded plastic parts have a number cast into them. Compare it with the details of the replacement before you order.

From the cab to the hitch

In the cab you will find push button switches such as the hazard light switch with lock, handles, and the rotary potentiometer for the linkage. Seats matter on a tractor that runs all day, and there are GRAMMER tractor seats here, including the air suspended Maximo Professional. For lighting there are LED work lamps, rear lights and holders to mount a lamp firmly on the cab roof.

Electrical work is covered by starter motors and alternators. Smaller parts include seals, sealing rings and O-rings, for example the seal for the tank sensor and the O-ring for the tank cap. At the rear there are Scharmüller drawbars and pins. The brands on this page include GRANIT, HELLA, Wabco, Scharmüller and GRAMMER.

Fitting a new gas strut

The gas strut that holds the windscreen frame open loses pressure over the years, until the screen creeps shut or swings closed in a gust. Fit the new strut with the piston rod pointing down. That keeps the seal inside the cylinder bathed in oil, so the strut holds its pressure for longer. Have someone hold the frame while you swap it, because without a strut it drops shut hard.

Other tractors in the Fendt 800 line

If your yard has more than one tractor from the Fendt 800, each model has its own page with the parts that fit it, which keeps orders tidy machine by machine: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. For older models and the rest of the make, go to the overview of Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart