For reconditioning dull headlamps. Fast and cost-effective variant. Ensures significantly improved light output. Extends the service life of automotiv...More
For reconditioning dull headlamps. Fast and cost-effective variant. En...
For mounting vehicle-specific adapter rings and adapter plates. In conjunction with spring tensioner 500.8630. Forged and tempered. Including 3 fixing...More
For mounting vehicle-specific adapter rings and adapter plates. In con...
For extending the spring discs during assembly and disassembly of low-set coil springs on the rear axle. Springs can be tensioned from the outside. In...More
For extending the spring discs during assembly and disassembly of low-...
Ideally suited to check the wear on the toothed belt. Simple handling. Very high degree of accuracy.<br /><b>Application range / for:</b> <b>Citroën,...More
Ideally suited to check the wear on the toothed belt. Simple handling....
Ideally suited to pressing out rusty and stuck drive shafts. For all cars with 3, 4 and 5 hold hubs. For hole diameters from 90 to 130 mm. Optimal for...More
Ideally suited to pressing out rusty and stuck drive shafts. For all c...
Suitable for wall mounting. Consists of filter pressure reducer, oil regulator and manometer. Inspection glass for fluid inspection. For the assembly ...More
Suitable for wall mounting. Consists of filter pressure reducer, oil r...
For quick and easy insertion of stud bolts on wheel hubs. No need to remove the wheel hub. Suitable for manual operation. Including dies for thread re...More
For quick and easy insertion of stud bolts on wheel hubs. No need to r...
For visual monitoring and troubleshooting. Pull handle with telescopic function 172.0 – 640.0 mm. With interchangeable light-diffused magnet up to 3...More
For visual monitoring and troubleshooting. Pull handle with telescopic...
Sturdy design. Can be mounted on the front of the workshop press. For protecting against parts protruding or being thrown out if components break duri...More
Sturdy design. Can be mounted on the front of the workshop press. For ...
Gas operated micro soldering device up to 1,300°C / 2,450°F. With piezo ignition. Perfect for fine working. Gas supply totally adjustable. Filled wi...More
Gas operated micro soldering device up to 1,300°C / 2,450°F. With pi...
Ideal set for universal use. Practical arrangement of compartments in the internal and external areas. With extra internal tool pockets for quick reac...More
Ideal set for universal use. Practical arrangement of compartments in ...
Suitable for the damage-free and correct assembly and removal of radial shaft seals and drive shaft circlips. For tight-fit application on engine shaf...More
Suitable for the damage-free and correct assembly and removal of radia...
Ideally suited for installation and removal of hard to reach oil filter covers when changing the oil filter unit or the oil filter. Use according to t...More
Ideally suited for installation and removal of hard to reach oil filte...
For quick and easy replacement of wheel bolts. No need to remove the hub. For machine operation. Including interchangeable adapter for optimum access ...More
For quick and easy replacement of wheel bolts. No need to remove the h...
Ideal for the assembly and disassembly of injector sleeves. Sturdy design. Cylinder head works against the thrust bearing. Tilting of the injector sle...More
Ideal for the assembly and disassembly of injector sleeves. Sturdy des...
Ideal compilation set for testing the cooling system as well as the pressure caps. With cooling system filling valve. Quickly find leaks in the coolin...More
Ideal compilation set for testing the cooling system as well as the pr...
For the assembly and disassembly of hard to open CLIC spring closure pipe coupling for fuel, air-conditioning, air and hydraulic pipes. No damage to t...More
For the assembly and disassembly of hard to open CLIC spring closure p...
Ideal for splaying the axle joint clamp boreholes, or ball joint attachments. It is necessary to remove the secured spring absorber unit from the axle...More
Ideal for splaying the axle joint clamp boreholes, or ball joint attac...
12 point. Double hexagon profile allows the pickup of hexagon and 12-point spark plugs. Spanner widths 14 and 16 mm. Special shape for EcoBoost engin...More
12 point. Double hexagon profile allows the pickup of hexagon and 12-p...
Working pressure 1,200 kg by 5 bar, 2,400 kg by 10 bar. Through double cylinder with up to 2,400 kg also suitable for strong springs (transporters, SU...More
Working pressure 1,200 kg by 5 bar, 2,400 kg by 10 bar. Through double...
Internal square drive to DIN 3121 / ISO 1174. High accuracy of fit. Special profile with 4 internal studs. Extremely robust version. Suitable for high...More
Internal square drive to DIN 3121 / ISO 1174. High accuracy of fit. Sp...
