Menu
EUR

Tipper and pendulum locks

56 Products
Show:
Side locking spring 1000 mm, Ø 60 x 330 mm, wire 10 mm HW 60, HW 80
8%
Side locking spring 1000 mm, Ø 60 x 330 mm, wire 10 mm HW 60, HW 80
Suitable for tailboard height (mm): 1000 | Quantity per trailer: 2 | Wire Ø (mm)...
€178,79 €147,76 €164,45 €135,91
 
Hesterberg Catch 664N left, untreated
8%
Hesterberg
Catch 664N left, untreated
Version: Left; Untreated | Comparable type: 664 N | Mounting position: Left | De...
€57,84 €47,80 €53,20 €43,97
 
Hesterberg Tipper lock 664N left, fully galvanized Zn+Ni, bore M12
Hesterberg
Tipper lock 664N left, fully galvanized Zn+Ni, bore M12
Comparable type: 664 N | Mounting position: left | Description: Double over-cent...
€65,55 €54,17
 
Hesterberg Flat bolt catch 680, left, galvanized
Hesterberg
Flat bolt catch 680, left, galvanized
Description: Flat bolt closure 680 The 680 closure is an inch closure whose leve...
€89,40 €73,88
 
Hildebrand Pendulum catch left 205 mm, blank, without pendulum pin, up to 6.0 t
8%
Hildebrand
Pendulum catch left 205 mm, blank, without pendulum pin, up to 6.0 t
Version: blank, without pendulum pin | Height (mm): 205
€168,64 €139,37 €155,10 €128,18
 
Hildebrand Tipper lock left, for rear wall rotated 90°
8%
Hildebrand
Tipper lock left, for rear wall rotated 90°
Version: for rear walls rotated 90°
€327,53 €270,69 €301,30 €249,01
 
Hildebrand Pendulum pin right, blank, over 4.5 t
8%
Hildebrand
Pendulum pin right, blank, over 4.5 t
Version: blank
€155,44 €128,46 €143,00 €118,18
 
Hildebrand Pendulum pin left, blank, over 4.5 t
8%
Hildebrand
Pendulum pin left, blank, over 4.5 t
Version: blank
€155,44 €128,46 €143,00 €118,18
 
Hildebrand Tension lock adjustable with T-piece, 300 x 120 mm, recess 30 mm
8%
Hildebrand
Tension lock adjustable with T-piece, 300 x 120 mm, recess 30 mm
Comparable type: H 206 N-LF | Length (mm): 300 | Version: adjustable, with T-pie...
€146,82 €121,34 €135,00 €111,57
 
Hesterberg Tipper lock 664N left, fully galvanized
8%
Hesterberg
Tipper lock 664N left, fully galvanized
Description: Double over-center catch with additional locking via lever. Automat...
€64,86 €53,60 €59,65 €49,30
 
Hook for locking HW 60, HW 80, V 3.2, V 4.2, V 4.2.3
Hook for locking HW 60, HW 80, V 3.2, V 4.2, V 4.2.3
Quantity per trailer: nach Bedarf | Comparison no.: 12/001/018 | suitable for: H...
€65,60 €54,21
 
Hildebrand Over-center tensioner side, with universal joint Ø 20 mm, right
8%
Hildebrand
Over-center tensioner side, with universal joint Ø 20 mm, right
Shaft Ø (mm): 20 | Version: blank, with universal joint
€311,62 €257,54 €286,65 €236,90
 
Hildebrand Pendulum pin left, blank, up to 6.0 t
8%
Hildebrand
Pendulum pin left, blank, up to 6.0 t
Version: blank
€58,18 €48,08 €53,50 €44,21
 
Hildebrand Pendulum catch right 254 mm, blank, without pendulum pin, over 4.5 t
8%
Hildebrand
Pendulum catch right 254 mm, blank, without pendulum pin, over 4.5 t
Version: blank, without pendulum pin | Height (mm): 254
€184,81 €152,74 €170,00 €140,50
 
Hildebrand Pendulum catch left 254 mm, blank, without pendulum pin, over 4.5 t
8%
Hildebrand
Pendulum catch left 254 mm, blank, without pendulum pin, over 4.5 t
Height (mm): 254 | Version: blank, without pendulum pin
€184,81 €152,74 €170,00 €140,50
 
Hildebrand Over-center tensioner bottom, 300 mm, without universal joint, left
8%
Hildebrand
Over-center tensioner bottom, 300 mm, without universal joint, left
Version: blank, tensioner 300 mm, without universal joint
€202,77 €167,58 €186,50 €154,13
 
Hildebrand Over-center tensioner bottom, light, without universal joint, right
8%
Hildebrand
Over-center tensioner bottom, light, without universal joint, right
Version: blank, without universal joint
€142,20 €117,52 €130,80 €108,10
 
Replacement spring pendulum catch left
8%
Replacement spring pendulum catch left
€13,83 €11,43 €12,70 €10,50
 
Hesterberg Torsion spring for catch 664N
Hesterberg
Torsion spring for catch 664N
€2,15 €1,78
 
Hesterberg Catch 664N straight, galvanized, left and right HW 60, HW 80
8%
Hesterberg
Catch 664N straight, galvanized, left and right HW 60, HW 80
Mounting position: Right, left | Description: Double over-center catch with addi...
€60,00 €49,59 €55,15 €45,58
 
Hesterberg Catch 664N straight, untreated, left and right HW 60, HW 80
8%
Hesterberg
Catch 664N straight, untreated, left and right HW 60, HW 80
Mounting position: Right, left | Comparison no.: 13/059/001 | Comparable type: 6...
€75,24 €62,18 €69,20 €57,19
 
Tipper lock 603 right, screw-on, mounting height 37 mm
8%
Tipper lock 603 right, screw-on, mounting height 37 mm
Areas of application: Tipper bodies of all types; Bodies with or without corner ...
€37,63 €31,10 €34,60 €28,60
 
Hildebrand Locking hook H 119, weld-on, for 30 mm shaft, blank
8%
Hildebrand
Locking hook H 119, weld-on, for 30 mm shaft, blank
Version: weld-on, for 30 mm shaft, blank
€42,74 €35,32 €39,30 €32,48
 
Hildebrand Locking hook weld-on, shaft 25 mm, blank, H 119 hinge bearing
8%
Hildebrand
Locking hook weld-on, shaft 25 mm, blank, H 119 hinge bearing
Version: weld-on, for 25 mm shaft, blank
€33,09 €27,35 €30,40 €25,12
 
Retaining cam right, screw-on, hole spacing 62 x 40 mm, galvanized
8%
Retaining cam right, screw-on, hole spacing 62 x 40 mm, galvanized
Surface: Galvanised according to FHS-TL 9.01 | Material: Steel | Version: Right;...
€22,05 €18,22 €20,25 €16,74
 
Retaining cam left, screw-on, hole spacing 62 x 40 mm, galvanized
8%
Retaining cam left, screw-on, hole spacing 62 x 40 mm, galvanized
Hole spacing (mm): 62 x 40 | Surface: Galvanised according to FHS-TL 9.01 | Mate...
€22,05 €18,22 €20,25 €16,74
 
Hesterberg Tipper lock 664N right, fully galvanized Zn+Ni, bore M12
Hesterberg
Tipper lock 664N right, fully galvanized Zn+Ni, bore M12
Description: Doppelte Übertotpunktsicherung mit zusätzlicher Sicherung über Hand...
€65,55 €54,17
 
Hesterberg Holding cam side wall operation raw, for welding HW 60, HW 80
8%
Hesterberg
Holding cam side wall operation raw, for welding HW 60, HW 80
suitable for: HW 80 / HW 60 | To fit: 42 552HM, 42 568HM | Comparison no.: 24/02...
€5,88 €4,86 €5,40 €4,46
 
Snap lock left, galvanized HW 60, HW 80, THK 5
8%
Snap lock left, galvanized HW 60, HW 80, THK 5
Menke no.: 51946 | Quantity per trailer: 2 | Comparison no.: 13/060/000 | Additi...
€33,65 €27,81 €30,95 €25,58
 
Snap lock right, galvanized HW 60, HW 80, THK 5
8%
Snap lock right, galvanized HW 60, HW 80, THK 5
suitable for: HW 80 / HW 60 / THK 5 | Quantity per trailer: 2 | Comparison no.: ...
€33,65 €27,81 €30,95 €25,58
 
Hesterberg Tipper lock hand lever part, untreated, left and right
Hesterberg
Tipper lock hand lever part, untreated, left and right
Version: blank, for replacement purposes only
€42,55 €35,17
 
Hesterberg Flat bolt catch 680, right, galvanized
Hesterberg
Flat bolt catch 680, right, galvanized
Surface: Galvanisch verzinkt nach FHS-TL 9.01
€89,40 €73,88
 
Hildebrand Over-center tensioner side, with universal joint Ø 20 mm, left
8%
Hildebrand
Over-center tensioner side, with universal joint Ø 20 mm, left
Shaft Ø (mm): 20 | Version: blank, with universal joint
€311,62 €257,54 €286,65 €236,90
 
Hildebrand Pendulum pin right, blank, up to 6.0 t
8%
Hildebrand
Pendulum pin right, blank, up to 6.0 t
Version: blank
€58,18 €48,08 €53,50 €44,21
 
Hildebrand Pendulum catch right 205 mm, blank, without pendulum pin, up to 6.0 t
8%
Hildebrand
Pendulum catch right 205 mm, blank, without pendulum pin, up to 6.0 t
Height (mm): 205 | Version: blank, without pendulum pin
€168,64 €139,37 €155,10 €128,18
 
Hildebrand Pendulum pin right, blank, up to 5.0 t
8%
Hildebrand
Pendulum pin right, blank, up to 5.0 t
Version: blank
€46,24 €38,21 €42,50 €35,12
 
Hildebrand Universal joint over-center tensioner Ø 30 mm, bare, left and right
Hildebrand
Universal joint over-center tensioner Ø 30 mm, bare, left and right
Shaft Ø (mm): 30 | Version: blank
€24,55 €20,29
 
Hildebrand Over-center tensioner bottom, light, without universal joint, left
8%
Hildebrand
Over-center tensioner bottom, light, without universal joint, left
Version: blank, without universal joint
€147,53 €121,93 €135,70 €112,15
 
Hildebrand Universal joint over-center tensioner Ø 20 mm, bare, left and right
8%
Hildebrand
Universal joint over-center tensioner Ø 20 mm, bare, left and right
Shaft Ø (mm): 20 | Version: blank
€29,31 €24,22 €26,95 €22,27
 
Replacement spring pendulum catch right
8%
Replacement spring pendulum catch right
€13,83 €11,43 €12,70 €10,50
 
Hesterberg Tension lock adjustable with T-shaped contact part, 250 / 282 x 95 mm
8%
Hesterberg
Tension lock adjustable with T-shaped contact part, 250 / 282 x 95 mm
Comparable type: 686 SN | Length (mm): 250 / 282 | Version: adjustable, with loa...
€151,01 €124,80 €138,90 €114,79
 
Tilt lock, galvanized, without thread
8%
Tilt lock, galvanized, without thread
€4,20 €3,47 €3,87 €3,20
 
Tilt lock, galvanized, with M12 thread
8%
Tilt lock, galvanized, with M12 thread
€8,37 €6,92 €7,70 €6,36
 
Pendulum catch 390 mm
8%
Pendulum catch 390 mm
Length (mm): 390
€203,16 €167,90 €186,90 €154,46
 
Pendulum catch 190 mm
8%
Pendulum catch 190 mm
Length (mm): 190
€202,65 €167,48 €186,40 €154,05
 
Hesterberg Pendulum pin blank, weld-on, left and right HW 60, HW 80
8%
Hesterberg
Pendulum pin blank, weld-on, left and right HW 60, HW 80
Version: blank, to fit as left and right | suitable for: HW 80 / HW 60 | Quantit...
€8,02 €6,63 €7,35 €6,07
 
Hesterberg Tipper lock 664N right, fully galvanized
8%
Hesterberg
Tipper lock 664N right, fully galvanized
Mounting position: Right | Description: Double over-center catch with additional...
€64,86 €53,60 €59,65 €49,30
 
Hesterberg Tipper lock 664N right, untreated
8%
Hesterberg
Tipper lock 664N right, untreated
Comparable type: 664 N | Mounting position: Right | Description: Double over-cen...
€57,84 €47,80 €53,20 €43,97
 
Showing 1 - 48 of 56
Brands
Price
Min Max
Close
© Copyright 2026 Techniek Totaal
Choose your language
Choose your currency
€

My account

Forgot your password?
or

Recently added

Total incl. tax
€0,00
View cart (0) Proceed to checkout
0
Compare
Start comparison

This product has been added to your cart
Proceed to checkout Continue shopping