Busching Combination tester XL
6 - 24 V
Technical data:
- Voltage range (V): 6/12/24 DCV
- • LED polarity display • Test tip extension 9 cm • Supply cable length 2.00 m • Test earth cable length 0.8 m
- Current requirement (A): 10
- Included in delivery: 1 x combination tester, 1 x test tip extension 9 cm, 1 x case
- Display range: 6 - 24 V
- Description: The combination tester supplies voltage to the components or assemblies being tested. This enables polarity and continuity tests or component tests. The toggle switch enables switching between positive and negative voltage, which is indicated by the LED lighting up green or red. Multifunction tester with one-handed operation. 6 to 24 V electrical systems in cars, lorries and motorcycles can be tested. The built-in LED light ensures that the work areas are illuminated. Troubleshooting is possible by connecting positive or negative potential. This potential is indicated by 2 differently coloured LEDs (GREEN/RED). An automatic switch-off occurs at loads above 10A. Also equipped with continuity tester with visual signal.
