Pressol Grease gun PRELIxx PRO 6 NPT 1/8", for 400 gram cartridges
Replaces: 14203 211 126
Technical data:
- Included in delivery: With hose holder; Filling nipple (FN) with venting function, M 10 x 1 male; Grease gun head made of die-cast zinc Z 410; Galvanised ball seat valve; Removable and movable push rod system; T-handle, optimised for gripping and pressing; Ergonomic handle, non-slip, very good power transmission and handling; Precision mouthpiece, NPT 1/8”; Reinforced hose, M 10 x 1 male, 0.43 x 11.81 in.
- Version: For 400 g cartridges
- Width (mm): 135
- Connection thread: M 10 x 1
- Description: Grease delivery of the penetration class according to ASTM worked penetration (10ˉ¹ mm): NLGI 3 up to 5°C; Exceptional service life thanks to perfect combination of zinc and ground steel; Roughness Ra (0.4 μm) and tolerance (6 μm) of the piston bore to the piston is unmatched - no false lubrication, maximum efficiency when lubricating; Variable stroke: in the event of high counterpressure, e.g. a resinified lubrication point, the short stroke means that the lubrication point can be overcome with significantly lower compressive force; Variable grease delivery volume is 0.1-1.95 cm³ per stroke; All screw connections are sealed using the seal included; Optimum leverage for operating the lever, meaning that the force required to operate the lever is as low as possible; Grease follower piston has a tight fit with bulk grease, and rests directly on the grease gun tube or on the inner wall of the grease cartridge; The mobility of the push rod means that the grease follower piston can be inserted even if the cartridge is damaged or not dimensionally accurate; Damaged cartridges can be easily removed; The push rod can be locked in any position - the push rod does not have to be pulled back completely to release the grease from the pressure of the spring (grease does not saponify); Cleaning is possible because it can be completely dismantled; Rolled thread on the grease gun tube is insensitive to damage from impacts and enables quick and easy insertion with 1.5 turns; Quick venting by half a turn of the grease gun tube, filling nipple
- Height (mm): 67
- Color: Black
- Length (mm): 396
Suitable for:
NLGI 3 up to 5°C, NLGI 2 up to 0°C
