Radiator antifreeze concentrate P11, G11, blue - 60 liter drum
Technical data:
- Classification: AFNOR N FR 15-601, AS 2108-2004, ASTM D 3306, BS 6580:2010, CUNA NC 956-16, SAE J 1034, UNE 26-361 - 88
- Application: Mixing ratio, antifreeze:; 1/2 antifreeze: 1/2 water -37°C; 2/5 antifreeze: 3/5 water -27°C; 1/3 antifreeze: 2/3 water -20°C; Never use GRANIT radiator antifreeze P11 undiluted, always mix with water; Observe the correct preparation water (clean water) according to the manufacturer specifications; Observe the correct mixing ratio, if in doubt switch to a pre-mixed product; Can be mixed with most coolants based on 1.2-ethanol (MEG). For optimum corrosion protection and optimum inhibitor effect, unmixed product should always be used; The concentration of GRANIT radiator antifreeze P11 should never be below 33% and never above 60%, follow the unit manufacturer’s instructions; Recommendation: 50:50 mixture and the use of demineralised or distilled water
- Version: GRANIT radiator antifreeze P11 is an ethylene glycol-based (MEG), amine-, phosphate-, nitrite- and borate-free antifreeze concentrate with additives based on OAT technology.
- Container: 60 l
- Packing type: Drum
- Color: Blue
- Additional information: When changing the antifreeze, empty and flush cooling systems and expansion tanks. The antifreeze change intervals for the respective manufacturer must not be exceeded. The concentration of GRANIT radiator antifreeze P11 should never be below 33% and never above 60%.
- Description: GRANIT radiator antifreeze P11 is a concentrated product and must be diluted with clean water before use in the cooling system. It prevents frost and corrosion damage in coolant circuits in combustion engines, and cavitation of pump segments. It is also low foaming. This is achieved thanks to inorganic and organic corrosion inhibitors in the cooling system. GRANIT radiator antifreeze P11 is an all-round coolant that meets industry standards such as the British standard BS 6580, the French standard NF R 15-601 and ASTM D 3306.; Excellent corrosion and frost protection; Good compatibility with seal materials; Hard water stable; Cost efficiency; Protection against overheating
- Areas of application: Suitable for use in the coolant systems of combustion engines and for aluminum engines.
- Specification: DTFR 29C100, MAN 324 NF, VW TL 774-C (G11)
