Radiator antifreeze silicate-free P12+ - 1.5 liter

Silicate-, amine-, phosphate-, nitrite- and borate-free

Technical data:

• Color: Red/purple
• Classification: AFNOR N FR 15-601, ASTM D 3306, ASTM D 4985, BS 6580:2010, CUNA NC 956-16, FFV Heft R443, JIS K 2234:2018, NATO S-759, Önorm V 5123, SAE J 1034, UNE 26-361 - 88
• Description: GRANIT radiator antifreeze - silicate-free offers reliable corrosion protection in conventional and aluminum engines in passenger cars for up to 250.000 km, in commercial vehicle and bus engines for up to 500.000 km and in stationary engines for up to 16.000 operating hours. When changing the antifreeze, empty and flush cooling systems, heating systems and expansion tanks. Do not exceed the operating time of 3-5 years, and observe the change intervals recommended by the vehicle or unit manufacturer.; Excellent long-term corrosion protection; Optimum seal and rubber compatibility; Optimum hard water stability; Optimum heat transfer; Optimum cost-effectiveness thanks to long-term protection; Optimum frost protection; Optimum protection against overheating; Very good long-term stability
• Packing type: Bottle
• Menke no.: 84846
• Box contents: 12
• Container: 1.5 l
• Areas of application: It is particularly suitable for aluminum engines and must be changed at intervals of up to five years.
• Version: GRANIT radiator antifreeze, silicate-free is an ethylene glycol-based silicate-, nitrite-, amine-, borate- and phosphate-free radiator protection agent concentrate with additives based on OAT technology.
• Application: Mixing ratio antifreeze:; 1/2 antifreeze: 1/2 water -37°C; 2/5 antifreeze: 3/5 water -27°C; 1/3 antifreeze: 2/3 water -20°C; Never use GRANIT radiator antifreeze - silicate-free undiluted, always mix with water; Observe the correct preparation water (clean water) according to manufacturer specifications; Observe the correct mixing ratio; If in doubt switch to premixed formulation; Radiator protection agents based on different technologies should not be mixed; Observe the unit manufacturer's instructions; The concentration of GRANIT radiator antifreeze - silicate-free should never be below 33% and never above 60%
• PP: 1
• Additional information: When changing the antifreeze, empty and flush cooling systems, heating systems and expansion tanks. The radiator protection agent change intervals for the respective manufacturer must not be exceeded. The concentration should never be below 33% and never above 60%.