Load capacity horizontal up to 18 kg. Load capacity up to 10 kg. For hanging compressed air tubes, cables, rucksacks or bags. Magnetic plate is cover...More
Load capacity horizontal up to 18 kg. Load capacity up to 10 kg. For ...
Ideal for splaying the axle joint clamp boreholes, or ball joint attachments. It is necessary to remove the secured spring absorber unit from the axle...More
Ideal for splaying the axle joint clamp boreholes, or ball joint attac...
For removing drive shafts in extremely tight spaces. Particularly suitable for electric vehicles. Extra heavy and solid execution. Ideally suitable fo...More
For removing drive shafts in extremely tight spaces. Particularly suit...
For the assembly and disassembly of bearings. Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc.. Universal use f...More
For the assembly and disassembly of bearings. Ideally for silent beari...
Ideally suited to pressing out rusty and stuck drive shafts. For all cars with 3, 4 and 5 hold hubs. For hole diameters from 90 to 130 mm. Optimal for...More
Ideally suited to pressing out rusty and stuck drive shafts. For all c...
Special lever for the correct and protective dismantling and assembly of axle parts. Different design of wishbones can be pressed down with low effort...More
Special lever for the correct and protective dismantling and assembly ...
Less risk of slipage due to automatically closing pulling arm. 8 length positions possible. Extremely robust spindle with inductively hardened thread....More
Less risk of slipage due to automatically closing pulling arm. 8 lengt...
Ideal for petrol and diesel engines in cars through to transporters. Fully insulated terminal clamps (1000 A). Integrated electronics protection. With...More
Ideal for petrol and diesel engines in cars through to transporters. F...
Test tip protected through a cap. Ideal for helping to locate short circuits and breaks . With shielded crocodile clamp. Stainless steel probe. Brass ...More
Test tip protected through a cap. Ideal for helping to locate short ci...
Universal test device for the vehicle electrics and electronics to test the voltage and polarity. To troubleshoot electronic components and prevent da...More
Universal test device for the vehicle electrics and electronics to tes...
For the quick and accurate testing of acidity in the battery fluid and the antifreeze content. Can also be used for coolant and windscreen wiper fluid...More
For the quick and accurate testing of acidity in the battery fluid and...
For visual monitoring and troubleshooting. Pull handle with telescopic function 172.0 – 640.0 mm. With interchangeable light-diffused magnet up to 3...More
For visual monitoring and troubleshooting. Pull handle with telescopic...
6 point. According to DIN 3319/ISO 6788. Sturdy design. Ideal for use with vans, commercial vehicles, tractors, agricultural and construction machines...More
6 point. According to DIN 3319/ISO 6788. Sturdy design. Ideal for use ...
For loosening and unscrewing of fixed nuts and bolts with damaged or up to 85% "round turned" heads. Also suitable for intact screw connections. Accor...More
For loosening and unscrewing of fixed nuts and bolts with damaged or u...
Torx-E-Profile. Ideal for loosening and tightening TORX® screws on brake calliper screw connections. Avoid disassembly of the steering tie lever. Wit...More
Torx-E-Profile. Ideal for loosening and tightening TORX® screws on br...
Torx-E-Profile. Ideal for loosening and tightening TORX® screws on brake calliper screw connections. Avoid disassembly of the steering tie lever. Wit...More
Torx-E-Profile. Ideal for loosening and tightening TORX® screws on br...
Torx-E-Profile. Ideal for loosening and tightening TORX® screws on brake calliper screw connections. Avoid disassembly of the steering tie lever. Wit...More
Torx-E-Profile. Ideal for loosening and tightening TORX® screws on br...
Flank traction profile. According to DIN 3113 Form A / ISO 3318 / ISO 7738. Jaw 15° offset. Ring head 15° offset. Polished heads. Matt finish. Chrom...More
Flank traction profile. According to DIN 3113 Form A / ISO 3318 / ISO ...
Flank traction profile. According to DIN 3113 Form A / ISO 3318 / ISO 7738. Jaw 15° offset. Ring head 15° offset. Polished heads. Matt finish. Chrom...More
Flank traction profile. According to DIN 3113 Form A / ISO 3318 / ISO ...
