Web Analytics
Case IH 856 XL tractor parts - Techniek Totaal
Menu
EUR

Tractor parts Case IH 856 XL

Looking for parts for your Case IH 856 XL tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

323 Products
Show:
GRANIT Control unit Bosch system SB7
GRANIT
This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed cylinder co... More
This auxiliary control unit is a four-position device that can be used...
€548,61 €453,40 €496,00 €409,92
You save 10%
 
Alternator 14 V / 65 A - Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€166,56 €137,65 €154,90 €128,02
You save 7%
 
GRANIT Main headlight insert left and right
GRANIT
Bulb: 12V55W / H4. Nominal voltage: 12 V. Light function: with high beam, with low beam, without position light. More
Bulb: 12V55W / H4. Nominal voltage: 12 V. Light function: with high be...
€27,35 €22,60 €25,83 €21,35
You save 6%
 
GRANIT Connection cables
GRANIT
Length: 2.5 m. Reference no.: 1762625. More
Length: 2.5 m. Reference no.: 1762625.
€70,88 €58,58 €59,92 €49,52
You save 15%
 
GRANIT Side panels XL cab Set left and right McCORMICK / IHC 743XL - 1455XL
GRANIT
To fit as: McCORMICK / IHC 743 XL, 745 XL, 844 XL, 856 XL, 955 XL, 956 XL, 1055 XL, 1056 XL, 1255 XL, 1455 XL More
To fit as: McCORMICK / IHC 743 XL, 745 XL, 844 XL, 856 XL, 955 XL, 956...
€408,74 €337,80 €363,94 €300,78
You save 11%
 
GRANIT Start switch 12 V/24 V
GRANIT
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 743XL, 745XL, 844XL, 845XL, 856XL 955XL, 1055XL, Deutz-Fahr AgroPrima 4.31, 4.51, ... More
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 74...
€45,71 €37,78 €42,51 €35,13
You save 7%
 
HELLA Main headlight
HELLA
To fit as: Case IH 383, 423, 433, 533, 633, 733, 833, 440, 540, 640, 453, 553, 554, 644, 654, 724, 824, 743, 744, 745, 745 S, 844, 844 S, 946, 1046, 1... More
To fit as: Case IH 383, 423, 433, 533, 633, 733, 833, 440, 540, 640, 4...
€127,59 €105,45 €102,59 €84,79
You save 20%
 
GRANIT Gas strut clip Roof hatch McCORMICK / IHC 743XL - 1455XL
GRANIT
To fit as: McCORMICK / IHC 743 XL, 745 XL, 844 XL, 856 XL, 955 XL, 956 XL, 1055 XL, 1056 XL, 1255 XL, 1455 XL More
To fit as: McCORMICK / IHC 743 XL, 745 XL, 844 XL, 856 XL, 955 XL, 956...
€22,02 €18,20 €20,48 €16,93
You save 7%
 
GRANIT Radiator Case IH Serie B, 644, 743, 743 XL, 744, 745 S, 745 XL, 844, 844 S, 844 XL, 845, 845 XL, 856 X
GRANIT
Dimensions: Height: 590 mm, Width: 550 mm. Supplementary set: With cap. Menke no.: 66688. More
Dimensions: Height: 590 mm, Width: 550 mm. Supplementary set: With cap...
€517,43 €427,63 €409,16 €338,15
You save 21%
 
GRANIT Lifting rod complete M40 x 3.0
GRANIT
Ø: 28 - 40 mm. Length min./max.: 580 - 780 mm. Fork inner width: 33 mm. More
Ø: 28 - 40 mm. Length min./max.: 580 - 780 mm. Fork inner width: 33 m...
€100,22 €82,83 €94,66 €78,23
You save 6%
 
Alternator
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€169,48 €140,07 €157,65 €130,29
You save 7%
 
GRANIT Tractormeter Clockwise rotation 40 km/h 8-speed McCORMICK / IHC 743XL, 745XL, 844XL, 856XL
GRANIT
To fit as: McCORMICK / IHC 743XL, 745XL, 844XL, 856XL More
To fit as: McCORMICK / IHC 743XL, 745XL, 844XL, 856XL
€166,01 €137,20 €154,42 €127,62
You save 7%
 
GRANIT Thermostat
GRANIT
Ø: 54 mm. Temperature: 82 °C. More
Ø: 54 mm. Temperature: 82 °C.
€19,21 €15,88 €17,44 €14,41
You save 9%
 
GRANIT Ratchet spring shift linkage McCORMICK / IHC D320 - D440, 323 - 833
GRANIT
To fit as: McCORMICK / IHC D 320, D 322, D 324, D 326, D 430, D 432, D 436, D 439, D 440, 323, 353, 423, 453, 523, 553, 624, 654, 724, 824, 433, 533, ... More
To fit as: McCORMICK / IHC D 320, D 322, D 324, D 326, D 430, D 432, D...
€9,72 €8,03 €9,09 €7,51
You save 6%
 
GRANIT Control unit This control valve is used in the tractor to control and regulate the power lift unit. It can also be used to lift and lower implements continuously, to maintain a predetermined position, or to achieve optimum utilisation of the tractor power
GRANIT
Technical data: Max. operating pressure: 220 bar. Nominal flow rate: max. 70 l/min. Tightening torque: 30 Nm. Connections: M18 x 1.5. Dimensions: 210 ... More
Technical data: Max. operating pressure: 220 bar. Nominal flow rate: m...
€973,67 €804,69 €820,65 €678,22
You save 16%
 
GRANIT Engine preheater, complete NOTE:, When installing the engine preheater, an additional threaded hole must be drilled on the left-hand side of the engine block drain connection. Please refer to the assembly instructions for further directions.
€262,21 €216,70 €243,86 €201,54
You save 7%
 
BOSCH Flasher/electronic 12 V, 6 connections
BOSCH
Version: 12 V / 2 + 1 + 1(8) x 21 W, Lug at top, 1 hole Ø 6.4 mm, With hazard warning light function. Fig.: 3E. Vehicle makes: Huerlimann, John Deere... More
Version: 12 V / 2 + 1 + 1(8) x 21 W, Lug at top, 1 hole Ø 6.4 mm, Wit...
€98,62 €81,50 €87,22 €72,08
You save 12%
 
GRANIT Rear light left without number plate light McCORMICK / IHC 644 - 1455XL
GRANIT
To fit as: McCORMICK / IHC 644, 743, 743XL, 744, 745, 745XL, 844, 844XL, 856XL, 955, 955XL, 956XL, 1046, 1055, 1055XL, 1056XL, 1255,1255XL, 1455, 1455... More
To fit as: McCORMICK / IHC 644, 743, 743XL, 744, 745, 745XL, 844, 844X...
€102,13 €84,41 €84,95 €70,21
You save 17%
 
GRANIT Replacement key Set, 2 off
GRANIT
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€11,31 €9,35 €10,52 €8,69
You save 7%
 
GRANIT Ball joint taper 24 - 26 mm - length 95 mm - M20 x 1.5
GRANIT
Taper (mm): 24 - 26. Length (mm): 95. Screw-in thread (mm): M20 x 1.5. More
Taper (mm): 24 - 26. Length (mm): 95. Screw-in thread (mm): M20 x 1.5.
€59,06 €48,81 €55,77 €46,09
You save 6%
 
GRANIT O-ring for lowering throttle
GRANIT
Dimensions: 3.3 x 2.5 mm. More
Dimensions: 3.3 x 2.5 mm.
€1,17 €0,97 €1,13 €0,93
You save 4%
 
GRANIT Clevis
GRANIT
Dimensions: Bore Ø = 29, Thread = M28 mm. More
Dimensions: Bore Ø = 29, Thread = M28 mm.
€490,30 €405,21 €443,29 €366,36
You save 10%
 
HELLA Interior light
HELLA
Bulb: K (10W). Colour: Transparent. Installation location: Interior. Nominal voltage: 12 V. Switches: On switch. Type: Halogen. Light function: Interi... More
Bulb: K (10W). Colour: Transparent. Installation location: Interior. N...
€11,25 €9,30 €11,06 €9,14
You save 2%
 
GRANIT Door left
GRANIT
Tractor type: Case IH 485XL, 495XL, 585XL, 595XL, 685XL, 743XL, 745XL, 785XL, 844XL, 845XL, 856 XL, 885XL, 956XL, 995, 1056XL, 1255XL, 1455XL, 3220, 3... More
Tractor type: Case IH 485XL, 495XL, 585XL, 595XL, 685XL, 743XL, 745XL,...
€728,42 €602,00 €609,32 €503,57
You save 16%
 
Showing 1 - 24 of 323

Parts for your Case IH 856 XL tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Case IH 856 XL. We also offer the right parts for all other tractor types from Case IH. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Case IH 856 XL. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Case IH 856 XL. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Case IH

Case IH is a former, originally American manufacturer of agricultural machinery, which under the same name supplies tractors among other products. Case IH was formed from the merger of the tractor manufacturers Case, David Brown, and the agricultural division of International Harvester (IH).

Brands
  • View more
Locking pin Ø
Guide width
Connecting pin
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart