Web Analytics
Case IH CS 150 (4/96-4/00) tractor parts
Menu
EUR

Tractor parts Case IH CS 150 (4/96-4/00)

Looking for parts for your Case IH CS 150 (4/96-4/00) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

374 parts found for Case IH CS 150 (4/96-4/00)
Show:
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.069,07 €883,53 €908,71 €751,00
You save 15%
PROBOSS Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
PROBOSS
On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 550 mm. Joystick console: Optional. S... More
On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: ...
€1.894,35 €1.565,58
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€803,62 €664,15
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Mekra
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€44,83 €37,05 €43,93 €36,31
You save 2%
GRANIT Agricultural machinery spotlight 36 W, 3908 lm, 183 x 102 x 61 mm, 12 / 24 V
GRANIT
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€53,43 €44,16 €52,36 €43,27
You save 2%
GRANIT Bush Ø 44 x 38,5 x 8,9 mm Case IH, New Holland
€11,68 €9,65 €11,45 €9,46
You save 2%
GRANIT King pin bore 15 mm, outer-Ø 28 mm, hole spacing 66 mm Carraro front axle
€38,27 €31,63 €37,50 €30,99
You save 2%
GRANIT Circlip Carraro front axle 145552 Case IH, New Holland
€4,24 €3,50 €4,16 €3,44
You save 2%
Carraro Combi ring 48 x 65 x 11 mm Case IH, New Holland, Steyr
Carraro
Inner Ø: 48 mm. Outer Ø: 65 mm. Thickness: 11 mm. More
Inner Ø: 48 mm. Outer Ø: 65 mm. Thickness: 11 mm.
€16,15 €13,35 €15,83 €13,08
You save 2%
Scharmüller Drawbar K50 Scharmüller S32, rail 330 mm, pin Ø 25 mm, 31 kN
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 167 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€999,90 €826,36 €849,92 €702,41
You save 15%
GRANIT Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
GRANIT
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€85,98 €71,06 €84,26 €69,64
You save 2%
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€555,95 €459,46 €472,56 €390,55
You save 15%
GRANIT Plug CARRARO front axle 145706 lower arm
€11,99 €9,91 €11,75 €9,71
You save 2%
GRANIT Bush wheel hub 40 x 44 x 35 mm
€8,47 €7,00 €8,30 €6,86
You save 2%
GRANIT Pin front axle Case IH, New Holland
€346,79 €286,60 €294,77 €243,61
You save 15%
Carraro Bearing bush front axle 40 x 44 x 35 mm
€7,10 €5,87 €6,96 €5,75
You save 2%
GRANIT LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
GRANIT
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x 76 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€69,88 €57,75 €68,48 €56,60
You save 2%
GRANIT O-ring lower arm Carraro front axle 145706
€2,27 €1,88 €2,22 €1,83
You save 2%
GRANIT Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
GRANIT
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø...
€92,00 €76,03 €90,16 €74,51
You save 2%
GRANIT Track rod 426 mm, taper 23,5 - 26,5 mm
GRANIT
A: 426 mm. C: M20 x 1,5 mm. D: M20 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 426 mm. C: M20 x 1,5 mm. D: M20 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€137,78 €113,87 €130,89 €108,17
You save 5%
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.324,18 €1.094,36 €1.125,55 €930,21
You save 15%
ROCKINGER Forced steering welded both ends, lock K50
ROCKINGER
Lock: K50. Assembly notes: Both ends. To fit: Rockinger ball insert RO825X. More
Lock: K50. Assembly notes: Both ends. To fit: Rockinger ball insert RO...
€1.346,73 €1.113,00 €1.139,76 €941,95
You save 15%
Carraro Seal kit brake cylinder Case IH CS 100-150, Steyr 9105-9145
€163,11 €134,80 €155,05 €128,14
You save 5%
GRANIT Disc axle housing 36,5 x 71 x 3 mm Carraro front axle 145169
€4,97 €4,11 €4,87 €4,02
You save 2%
Showing 1 - 24 of 374

Parts for your Case IH CS 150 (4/96-4/00) tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Case IH CS 150 (4/96-4/00). We also offer the right parts for all other tractor types from Case IH. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Case IH CS 150 (4/96-4/00). Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Case IH CS 150 (4/96-4/00). Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Case IH

Case IH is a former, originally American manufacturer of agricultural machinery, which under the same name supplies tractors among other products. Case IH was formed from the merger of the tractor manufacturers Case, David Brown, and the agricultural division of International Harvester (IH).

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart