Pressol Vane pump MobiMaxx 54 l/min, 24 V, G 1" i
24 V DC crocodile clips
Replaces: 23 407
Technical data:
- Description: First-class electric machine and pump construction; Continuous operation - 3 hours - with valve open; Lapped shaft seal set; Encapsulation of the electric motor largely prevents condensate water formation in the event of strong temperature fluctuations, which could cause short circuits; Pump housing can be freely positioned in all 90° positions; Switch housing can be freely positioned in all 90° positions; Switch housing made of impact-resistant die-cast zinc, coated by means of cataphoresis; Pump housing made of salt water-resistant die-cast aluminum, coated by means of cataphoresis; Motor housing completely galvanised, exterior coated; Narrow tolerances mean that high suction and pressure performance are achieved with maximum efficiency; The vane/stator material pairing guarantees the dimensional stability of the vanes up to 200°C / 392°F; Low weight and extremely long service life thanks to the choice of materials
- Temperature range (°C): 155
- Dimensions W x H x D (mm): 290 x 120 x 120
- Voltage (V): 24
- Speed (rpm): 2500
- Capacity (l/min): 54
- Thread: 1” female thread
- Supply pressure (bar): 1.8
- Material: Housing: AlSi 12 (resistant to salt water) Seals: FKM (Viton®)/NBR
- Version: Vane pump with integrated bypass, self-priming, connection: 1” female thread
- Cable length (m): 3
- Protection class: IP66
- Current requirement (A): 21
- Pumped substance: Fuel oil and diesel fuels
