Web Analytics
Fiat 70-90 tractor parts - Techniek Totaal
Menu
EUR

Tractor parts Fiat 70-90

Looking for parts for your Fiat 70-90 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

172 Products
Show:
GRANIT Rubber seal - 5 pcs.
GRANIT
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€51,57 €42,62 €48,99 €40,49
You save 5%
 
GRANIT Rubber seal 18,7 x 14,6 mm | clamping range 1,5-3 mm | 5 metres
GRANIT
Clamping range (mm): 1.5 - 3. Length (m): 5. W (mm): 18.7. H (mm): 14.6. More
Clamping range (mm): 1.5 - 3. Length (m): 5. W (mm): 18.7. H (mm): 14....
€40,80 €33,72 €38,76 €32,03
You save 5%
 
GRANIT Rubber seal - 5 pcs.
GRANIT
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm. More
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€40,60 €33,55 €38,57 €31,88
You save 5%
 
Alternator - Antonio Carraro, Fiat, Lamborghini
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€182,02 €150,43 €172,92 €142,91
You save 5%
 
GRANIT Gasket set for control unit 85219130 flange surface with O-ring and support ring
GRANIT Temperature sensor Thread: M22 x 1.5
GRANIT
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C. More
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C.
€14,05 €11,61 €13,35 €11,03
You save 5%
 
GRANIT Thermostat
GRANIT
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€17,19 €14,21 €16,33 €13,50
You save 5%
 
HELLA Push button switch Black button
HELLA
Version: For engine start and horn, moisture-proof push button, 2 blade terminals 6.3 mm, black push button, for wall thickness up to max. 5 mm, short... More
Version: For engine start and horn, moisture-proof push button, 2 blad...
€13,43 €11,10 €13,20 €10,91
You save 2%
 
Cobo Diode Relay
Cobo
Version: 12 V, enclosed with mounting eye Ø 8.3 mm, With 2 blade terminals - 31 (86) + 49 (87). More
Version: 12 V, enclosed with mounting eye Ø 8.3 mm, With 2 blade term...
€50,22 €41,50 €47,71 €39,43
You save 5%
 
GRANIT Sealing ring front, Ø 42 x 65 x 12 mm
GRANIT
Outer Ø: 65 mm. Width: 12 mm. Inner Ø: 42 mm. More
Outer Ø: 65 mm. Width: 12 mm. Inner Ø: 42 mm.
€3,90 €3,22 €3,83 €3,17
You save 2%
 
GRANIT Ball joint taper 20 - 22.2 mm - length 95 mm - M24 x 1.5
GRANIT
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5. More
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5.
€50,28 €41,55 €47,77 €39,48
You save 5%
 
GRANIT Pre-filter Ø 76.5 mm Hanomag Brillant 601, 701, Robust 800, 901
GRANIT
To fit as: Hanomag Brillant 601, 701, Robust 800, 901 More
To fit as: Hanomag Brillant 601, 701, Robust 800, 901
€144,70 €119,59 €137,47 €113,61
You save 5%
 
GRANIT Diaphragm feed pump
GRANIT
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€29,08 €24,03 €27,63 €22,83
You save 5%
 
GRANIT Control unit Can be switched between sa and da, with float position with detent and limit stop adjustable from 150 - 210 bar
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 70 l/min, Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 210 ... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€864,84 €714,74 €735,11 €607,53
You save 15%
 
GRANIT Lever with bolt and lock
€74,37 €61,46 €70,65 €58,39
You save 5%
 
Bosch/Rexroth Single pump anticlockwise
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: Anticlockwise. Output volume: 14 cc/rev. Line connection suction side: Ø 40mm, ... More
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: ...
€456,61 €377,36 €424,45 €350,79
You save 7%
 
Cobo Rocker switch For work lights
Cobo
Version: 12 V/24 V, On/off switch, 8 blade terminals, Installation dimension: 15 mm wide, 29 mm long and 34 mm high. More
Version: 12 V/24 V, On/off switch, 8 blade terminals, Installation dim...
€39,75 €32,85 €37,76 €31,21
You save 5%
 
Cobo Push button switch Universal
Cobo
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, 24 V / 20 A inductive, IP40. Reference no.: 336.019.006. More
Version: For flush mounting, make contact, normally off, 12 V / 30 A i...
€15,10 €12,48 €14,35 €11,86
You save 5%
 
Alternator - Case IH, Fiat, Laverda, New Holland
To fit as: Case IH, Fiat, Laverda, New Holland More
To fit as: Case IH, Fiat, Laverda, New Holland
€255,08 €210,81 €233,53 €193,00
You save 8%
 
Starter 12 V / 3.0 kW - Fiat, Laverda, New Holland
To fit as: Fiat, Laverda, New Holland More
To fit as: Fiat, Laverda, New Holland
€415,19 €343,13 €380,09 €314,12
You save 8%
 
GRANIT Pre-filter Ø 76.5 mm
€112,41 €92,90 €106,79 €88,26
You save 5%
 
GRANIT V-belt
€13,73 €11,35 €13,04 €10,78
You save 5%
 
GRANIT Gasket
€4,85 €4,01 €4,61 €3,81
You save 5%
 
GRANIT O-ring
€3,09 €2,55 €2,94 €2,43
You save 5%
 
Showing 1 - 24 of 172

Parts for your Fiat 70-90 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Fiat 70-90. We also offer the right parts for all other tractor types from Fiat. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Fiat 70-90. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Fiat 70-90. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Fiat

Fiat was founded in Turin, Italy, in 1899 by Giovanni Agnelli, an industrialist. Fiat stands for Fabricca Italiana Automobili Torino. The company started by producing cars and trucks. Later, stationary and marine engines, railway equipment, and even airplanes were built.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart