Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Fiat 540

Looking for parts for your Fiat 540 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

113 parts found for Fiat 540
Show:
GRANIT Radiator grille Fiat 450-640
GRANIT
To fit as Fiat. More
To fit as Fiat.
€257,85 €213,10 €244,95 €202,44
You save 5%
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€184,65 €152,60 €175,40 €144,96
You save 5%
Clamping nut three-point M16 right-hand and left-hand thread Fiat 312-640
Dimensions: 1 x right-hand thread and 1 x left-hand thread M16 mm. More
Dimensions: 1 x right-hand thread and 1 x left-hand thread M16 mm.
€29,15 €24,09
Starter motor 12 V, 2,7 kW, 9 teeth, Ø 110 mm, angle l 60
To fit as: Fiat, Ford, New Holland, Steyr More
To fit as: Fiat, Ford, New Holland, Steyr
€454,53 €375,64 €411,20 €339,83
You save 10%
Radiator hose, bottom Ø 37 / 44 mm, length 115 mm Fiat
Inner Ø: 37 / 44 mm. Length: 115 mm. More
Inner Ø: 37 / 44 mm. Length: 115 mm.
€23,25 €19,21
Coolant pipe lower outer-Ø 38 mm, M16 x 1,5 Fiat 450-1000
Dimensions: Outer Ø 38, Fitting M16 x 1.5 mm. Outer Ø: 38 mm. More
Dimensions: Outer Ø 38, Fitting M16 x 1.5 mm. Outer Ø: 38 mm.
€21,90 €18,10
GRANIT Seal cylinder 112 x 113 x 0,5 mm Ford, Fiat
GRANIT
Dimensions: 112 x 113 x 0.5 mm. More
Dimensions: 112 x 113 x 0.5 mm.
€13,00 €10,74
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
You save 46%
Starter ring gear Ø 335/293 mm, 110 teeth
Version: Ø 335/293 mm, 110 teeth. More
Version: Ø 335/293 mm, 110 teeth.
€51,97 €42,95 €49,35 €40,79
You save 5%
GRANIT Drive shaft 820 mm, M18 x 1,5 / M16 x 1
GRANIT
Version: Thread: M18 x 1.5 / M16 x 1. More
Version: Thread: M18 x 1.5 / M16 x 1.
€33,30 €27,52
LUK Double clutch 280, 35 x 40, 14 splines sintered Case IH, Fiat
LUK
Dimensions (mm): 35 x 40 14 grooves | Flywheel dimension (mm): 2 (erhöht) | Material specifications: Sintered clutch lining More
...
€629,05 €519,88 €597,55 €493,84
You save 5%
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€39,15 €32,36
Bosch/Rexroth Hydraulic pump anticlockwise 8 cm³, taper 1:8 Ø 17,46 mm, NBR Fiat
Bosch/Rexroth
Output volume: 8 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 1/m... More
Output volume: 8 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating p...
€438,87 €362,70 €416,90 €344,55
You save 5%
Track rod 480 mm, M20 x 1, taper 15 - 16 mm, M14 x 1,5
A: 500 - 800 mm. B: M20 x 1 mm. C: 15 - 16 mm. G: . D: M14 x 1,5 mm. E: 26 mm. F: 20 mm. More
A: 500 - 800 mm. B: M20 x 1 mm. C: 15 - 16 mm. G: . D: M14 x 1,5 mm. E...
€96,17 €79,48 €91,35 €75,50
You save 5%
GRANIT Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
GRANIT
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€51,53 €42,59 €48,95 €40,45
You save 5%
GRANIT Indicator switch left and right, 6 blade connections
GRANIT
Version: Functions: centre position off, indicator left and right, 6 blade terminals. More
Version: Functions: centre position off, indicator left and right, 6 b...
€72,70 €60,08 €65,75 €54,34
You save 10%
LUK Clutch kit flywheel 2 mm raised double plate connection
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228009810, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€582,87 €481,71 €553,70 €457,60
You save 5%
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
GRANIT Ball joint 385 mm, M14 x 1,5, 19,7 mm, taper 14,8 - 15,9 mm
GRANIT
A: 385 mm. C: M14 x 1,5 mm. D: 19,7 mm. E: 14,8 mm. F: 15,9 mm. Taper: 14,8 - 15,9 mm. More
A: 385 mm. C: M14 x 1,5 mm. D: 19,7 mm. E: 14,8 mm. F: 15,9 mm. Taper:...
€37,99 €31,40 €36,00 €29,75
You save 5%
Ball joint 92 mm, M14 x 1,5, M20 x 1, taper 14,8 - 15,9 mm
A: 92 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 14,8 mm. F: 15,9 mm. Taper: 14,8 - 15,9 mm. More
A: 92 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 14,8 mm. F: 15,9 mm. Tape...
€28,00 €23,14
Gear lever knob thread M14 x 1,5 Ford, Fiat
Version: Thread M14 x 1,5. More
Version: Thread M14 x 1,5.
€6,55 €5,41
Showing 1 - 24 of 113

Parts for your Fiat 540 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Fiat 540. We also offer the right parts for all other tractor types from Fiat. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Fiat 540. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Fiat 540. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Fiat

Fiat was founded in Turin, Italy, in 1899 by Giovanni Agnelli, an industrialist. Fiat stands for Fabricca Italiana Automobili Torino. The company started by producing cars and trucks. Later, stationary and marine engines, railway equipment, and even airplanes were built.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart