Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Fiat 400

Looking for parts for your Fiat 400 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

50 parts found for Fiat 400
Show:
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€184,65 €152,60 €175,40 €144,96
You save 5%
Starter motor 12 V, 2,7 kW, 9 teeth, Ø 110 mm, angle l 60
To fit as: Fiat, Ford, New Holland, Steyr More
To fit as: Fiat, Ford, New Holland, Steyr
€454,53 €375,64 €411,20 €339,83
You save 10%
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
You save 46%
GRANIT Drive shaft 820 mm, M18 x 1,5 / M16 x 1
GRANIT
Version: Thread: M18 x 1.5 / M16 x 1. More
Version: Thread: M18 x 1.5 / M16 x 1.
€33,30 €27,52
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€39,15 €32,36
Bosch/Rexroth Hydraulic pump anticlockwise 8 cm³, taper 1:8 Ø 17,46 mm, NBR Fiat
Bosch/Rexroth
Output volume: 8 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 1/m... More
Output volume: 8 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating p...
€438,87 €362,70 €416,90 €344,55
You save 5%
GRANIT Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
GRANIT
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€51,53 €42,59 €48,95 €40,45
You save 5%
GRANIT Indicator switch left and right, 6 blade connections
GRANIT
Version: Functions: centre position off, indicator left and right, 6 blade terminals. More
Version: Functions: centre position off, indicator left and right, 6 b...
€72,70 €60,08 €65,75 €54,34
You save 10%
GRANIT Ball joint 385 mm, M14 x 1,5, 19,7 mm, taper 14,8 - 15,9 mm
GRANIT
A: 385 mm. C: M14 x 1,5 mm. D: 19,7 mm. E: 14,8 mm. F: 15,9 mm. Taper: 14,8 - 15,9 mm. More
A: 385 mm. C: M14 x 1,5 mm. D: 19,7 mm. E: 14,8 mm. F: 15,9 mm. Taper:...
€37,99 €31,40 €36,00 €29,75
You save 5%
Ball joint 92 mm, M14 x 1,5, M20 x 1, taper 14,8 - 15,9 mm
A: 92 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 14,8 mm. F: 15,9 mm. Taper: 14,8 - 15,9 mm. More
A: 92 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 14,8 mm. F: 15,9 mm. Tape...
€28,00 €23,14
Gear lever knob thread M14 x 1,5 Ford, Fiat
Version: Thread M14 x 1,5. More
Version: Thread M14 x 1,5.
€6,55 €5,41
GRANIT Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€23,30 €19,26
Water pump with gasket Fiat engine 8035.01-8065.02
To fit: Fiat. Version: With gasket. More
To fit: Fiat. Version: With gasket.
€122,36 €101,12 €116,20 €96,03
You save 5%
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., taper 1:8, Ø 17,46 mm, clockwise
Bosch/Rexroth
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Bosch no.: 0510525046. More
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€440,02 €363,65 €418,00 €345,45
You save 5%
GRANIT Temperature sensor thread M22 x 1,5, 25-100 °C
GRANIT
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C. More
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C.
€18,85 €15,58
Ignition switch with key 12 V, 5 positions
Version: 12 V, screw and plug connections, 5 switch positions, Parking light, consumer, marker light, dipped beam and full beam.. More
Version: 12 V, screw and plug connections, 5 switch positions, Parking...
€48,78 €40,31 €44,10 €36,45
You save 10%
GRANIT Start switch rotary function 12 V, Ø 25,5 mm
GRANIT
Version: 12 V, with blade terminal and screw connection, O: off, 1: preheat, 2: start, Mounting opening Ø 25.5 mm / 5 mm. More
Version: 12 V, with blade terminal and screw connection, O: off, 1: pr...
€44,55 €36,82 €40,30 €33,31
You save 10%
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
Bosch/Rexroth Hydraulic pump 8 cm³/rpm., taper 1:8, Ø 17,46, anticlockwise Fiat
Bosch/Rexroth
Output volume (cc/rev): 8 | Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510425324 | Direction of rotation: Anticlockwise More
Output volume (cc/rev): 8 | Drive shaft: Taper 1:8, Ø 17.46 | Bosch n...
€588,17 €486,09 €558,75 €461,78
You save 5%
Showing 1 - 24 of 50

Parts for your Fiat 400 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Fiat 400. We also offer the right parts for all other tractor types from Fiat. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Fiat 400. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Fiat 400. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Fiat

Fiat was founded in Turin, Italy, in 1899 by Giovanni Agnelli, an industrialist. Fiat stands for Fabricca Italiana Automobili Torino. The company started by producing cars and trucks. Later, stationary and marine engines, railway equipment, and even airplanes were built.

Brands
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart