Menu
EUR

Landini 8550 tractor parts & technical data

Brakes and transmission, lighting, steering and front axle: these are some of the groups among more than 90 parts for the Landini 8550 from the 50 series.

93 parts found for Landini 8550
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€295,17 €243,94 €280,40 €231,74
You save 5%
GRANIT Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
GRANIT
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€56,00 €46,28 €53,20 €43,97
You save 5%
GRANIT Steering cylinder 4-wheel tractor, piston rod Ø 25 mm
€744,85 €615,58 €707,60 €584,79
You save 5%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€980,10 €810,00 €931,00 €769,42
You save 5%
GRANIT Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
GRANIT
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blade terminal. More
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally cl...
€10,95 €9,05
Ball joint 75 mm, M16 x 1,5, M18 x 1,5, taper 20 - 22 mm
A: 75 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 75 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22 mm. Taper:...
€44,59 €36,85 €42,35 €35,00
You save 5%
GRANIT Hydraulic pump 22,9 cm³/rpm. clockwise Carraro, Landini
GRANIT
Output volume: 22,9 cc/rev. Drive shaft: Taper 1:8. Direction of rotation: Right. Line connection suction side: Ø 34 mm, 4-hole, M8. Line connection ... More
Output volume: 22,9 cc/rev. Drive shaft: Taper 1:8. Direction of rotat...
€469,60 €388,10 €446,10 €368,68
You save 5%
GRANIT Temperature sensor 12 volt, thread 5/8 BSP
GRANIT
Version: Thread: 5/8" BSP. Thread: 5/8 BSP. More
Version: Thread: 5/8" BSP. Thread: 5/8 BSP.
€15,25 €12,60
Water pump with gasket engine Perkins A4.203
To fit: Clark, Eicher, Landini, Massey Ferguson, Perkins, Manitou, Merlo. Version: With gasket. More
To fit: Clark, Eicher, Landini, Massey Ferguson, Perkins, Manitou, Mer...
€69,49 €57,43 €66,00 €54,55
You save 5%
GRAMMER Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
GRAMMER
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 400 mm. Fore/aft isolator: Optional.... More
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch:...
€1.135,80 €938,68
Seal kit hydraulic steering Massey Ferguson, Landini
€60,46 €49,97 €57,40 €47,44
You save 5%
GRANIT Seal water pump
€10,85 €8,97
Sealing ring for injection nozzle copper Massey Ferguson, Eicher, Landini
GRANIT Piston set, complete 4 rings, Ø 101,05 mm, piston pin Ø 34,93 x 84 mm
GRANIT
Dimensions: 4 rings, Ø 101.05 mm, Gudgeon pin Ø 34.93 x 84 mm, Combustion chamber Ø 61 mm, Combustion chamber depth 21.5 mm, Dry liner. More
Dimensions: 4 rings, Ø 101.05 mm, Gudgeon pin Ø 34.93 x 84 mm, Combu...
€174,78 €144,45 €166,00 €137,19
You save 5%
Clutch kit flywheel flat Massey Ferguson, McCormick, Landini
To fit as: Massey Ferguson 367 CF, 376 CF, 244, 134 V, 164 T F, 164 T S, 164 T V, 154, 174, 254, 264, 274, 233, 253, 273, 333, 334, 3... More
To fit as: Massey Ferguson 367 CF, 376 CF, 244, 134 V, 164 T F, 1...
€628,91 €519,76 €597,45 €493,76
You save 5%
Cobo Rear light left 169 x 62 x 90 mm, 12 V, hole spacing 132 mm
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Plug. Width: 169 mm. Form: Rectangular. Height: 62 mm. Cable length: 0.11 m. Hole spacing: 132 mm. Dim... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Plug. Width: 169 mm. F...
€44,23 €36,55 €42,00 €34,71
You save 5%
GRAMMER Tractor seat air suspended Compacto COMFORT S fabric, seat width 400 mm
GRAMMER
Comfort seat with air suspension and 12V compressor. Height adjustment 60 mm continuous. Weight adjustment 50 - 130 kg. Longitudinal adjustment 180 mm... More
Comfort seat with air suspension and 12V compressor. Height adjustment...
€1.120,00 €925,62
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.078,71 €891,50 €1.024,75 €846,90
You save 5%
HELLA Oil pressure switch engine open function (NO) 1/8 inch NPT, 0,4 - 0,6 bar
HELLA
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: black. Pressure range: 0,4 - 0,6 bar. Thread: ... More
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade te...
€10,75 €8,88
GRANIT Clutch cable driving clutch 655 mm, sleeve 300 mm, M6
GRANIT
To fit as: Massey Ferguson 274S, 294S, 377, 387, 397, 397T, 1007 More
To fit as: Massey Ferguson 274S, 294S, 377, 387, 397, 397T, 1007
€40,76 €33,69 €38,70 €31,98
You save 5%
Radiator Massey Ferguson Series 104-203, Landini Series 30-500
To fit as: Landini Serie 30 (5830, 6830, 7830, 8830), Serie 40 (5840, 6840), Serie 50 (6550, 7550, 8550), Serie 500 (5500, 6500, 7500, 8500), Serie Ci... More
To fit as: Landini Serie 30 (5830, 6830, 7830, 8830), Serie 40 (5840, ...
€567,43 €468,95 €539,00 €445,45
You save 5%
Showing 1 - 24 of 93

Landini 8550 parts for the engine, hydraulics and seat

The Landini 8550 has more than 90 replacement parts on this page, from GRANIT and from makers such as GRAMMER, Cobo, KS and Perkins. They cover the jobs that come up on an older tractor of this type: an engine that burns oil, a lift that drops, a brake that feels soft or a seat that has seen too many seasons.

Engine work on the 8550

Piston ring sets and complete pistons are here for anyone opening up the block, together with sealing rings, gaskets and seals. On the fuel side you will find feed pumps and regulator springs, and the cooling system is covered with radiators. Silencers complete the exhaust.

A tip before fitting new rings: measure the cylinder bore first. If there is a clear ridge worn at the top of the bore, fresh rings will not seal well against it, and a complete piston set is the better repair. Check each ring gap in the bore before fitting, and stagger the gaps around the piston so they do not line up.

Hydraulics, brakes and the driver's seat

  • Lift system: hydraulic pumps and sealing rings for the lift cylinder.
  • Brakes: repair sets for the brake cylinder in the old version.
  • Warning lamps: oil pressure switches for the engine.
  • Seating: GRAMMER Compacto seats and an air suspended tractor seat.

After rebuilding a brake cylinder, flush the whole system with fresh brake fluid. Old fluid absorbs moisture and attacks new rubber cups far sooner than you would expect.

Regulator springs are small parts that are easy to overlook. A tired spring lets the engine speed hunt under load and leaves the idle unsettled, so it makes sense to replace it while the fuel side is being worked on anyway. Silencers are best fitted with fresh clamps and brackets, since a loose box soon cracks at the pipe from vibration.

Matching a part to your tractor

The type plate tells you that the machine is an 8550. Beyond that, the old part is your best guide. Pumps, radiators and cylinders usually carry a reference number cast or stamped into the housing, and comparing that number with the details on this page avoids ordering the wrong thing. With a hydraulic pump, also compare the direction of rotation and the shaft connection.

Other tractors in the 50 series

The 8550 belongs to the Landini 50 series, and two related models have their own page. The Landini 6550 and the Landini 7550 each list the parts that fit that specific model, so order for the type on your plate. Tractors from the rest of the Landini line up are grouped under Landini parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart