Menu
EUR

Landini Legend 145 tractor parts & technical data

Trailer couplings, brake and transmission parts and lighting for the Landini Legend 145 are listed here, more than 90 items in total for your tractor.

84 parts found for Landini Legend 145
Show:
ROCKINGER Flange hitch automatic spherical pin 38 mm, 140 x 80 mm, M17
ROCKINGER
Lock: Automatic bolt. Connecting pin: 38 mm. Hole pattern: 140 x 80 mm. Hole: M17 mm. Load capacity: 2000 kg. D-value: 82 kN. Colour: Black. No. of ho... More
Lock: Automatic bolt. Connecting pin: 38 mm. Hole pattern: 140 x 80 mm...
€844,35 €697,81 €678,86 €561,04
You save 20%
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable and foldable. Weight adjustment, height adjustment 60 mm and Longitud... More
Comfort seat with air suspension and 12V compressor. Armrests, height ...
€1.079,85 €892,44
Wheel brake cylinder mineral oil Massey Ferguson, Landini
Suitable oil: Mineral oil. More
Suitable oil: Mineral oil.
€50,46 €41,70 €47,90 €39,59
You save 5%
Water pump engine Perkins 1000.6, 1004.4
€136,37 €112,70 €129,55 €107,07
You save 5%
Scharmüller Flange hitch manual 31 mm, 140 x 80 mm, M17, 2500 kg, 82,4 kN
Scharmüller
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2500 kg. D-value: 82,4 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pin: 3... More
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2500 kg. D...
€409,34 €338,30 €344,75 €284,92
You save 16%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€77,45 €64,01
GRANIT Temperature sensor 12 volt, thread 5/8 BSP
GRANIT
Version: Thread: 5/8" BSP. Thread: 5/8 BSP. More
Version: Thread: 5/8" BSP. Thread: 5/8 BSP.
€15,25 €12,60
GRANIT Thermostat Ø 54 mm, 82 °C
€20,00 €16,53
Walterscheid Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.863,82 €1.540,35 €1.464,40 €1.210,25
You save 21%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.871,87 €1.547,00 €1.544,25 €1.276,24
You save 18%
Scharmüller Flange hitch automatic 38 mm, 140 x 80 mm, M16, 2000 kg, 82,4 kN
Scharmüller
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Hole: M16 mm. No. of holes: 4. Colour: Black. Description: ... More
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 k...
€1.000,29 €826,69 €884,65 €731,12
You save 12%
Cobo Cut-out switch starter motor M16 x 2, open function (NO)
Cobo
Version: Break contact, Thread: M16 x 2, 2 blade terminals. More
Version: Break contact, Thread: M16 x 2, 2 blade terminals.
€38,00 €31,41
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.043,02 €862,00 €838,55 €693,02
You save 20%
GRANIT Tank cap thread Ø 59 / 64 mm
GRANIT
Thread Ø mm: 59 / 64. More
Thread Ø mm: 59 / 64.
€45,07 €37,25 €42,80 €35,37
You save 5%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.175,21 €971,25 €923,35 €763,10
You save 21%
ROCKINGER Flange hitch without hand coupling pin 31,5 mm, 140 x 80 mm, M17
ROCKINGER
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 78,2 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pin: 3... More
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D...
€914,96 €756,17 €700,61 €579,02
You save 23%
FEBI Engine oil filter Ø 93 mm, height 177 mm, thread 3/4"-16 UNF
€19,80 €16,36 €12,18 €10,07
You save 38%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
Bosch/Rexroth Double pump 28 + 16 cm³, right, 13 teeth Landini Legend 105 - 165
Bosch/Rexroth
Output volume (cc/rev): 28 + 16 | Direction of rotation: Clockwise | Bosch no.: 0510767032 | Fitting Ø (mm): 82,55 | Drive shaft: Splined shaft SAE, ... More
Output volume (cc/rev): 28 + 16 | Direction of rotation: Clockwise | B...
€1.447,68 €1.196,43 €1.375,25 €1.136,57
You save 5%
FEBI Engine oil filter Ø 93 mm, height 177 mm, thread 3/4"-16 UNF
€26,68 €22,05 €8,08 €6,68
You save 70%
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
ROCKINGER Flange hitch automatic deep jaw 36 mm, 140 x 80 mm, M17
ROCKINGER
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 78,2 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pi... More
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 k...
€1.378,49 €1.139,25 €1.055,50 €872,31
You save 23%
LUK Double clutch 350TGU6 48 x 52 mm, 24 splines sintered Landini
LUK
Dimensions (mm): 48 x 52 24 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 48 x 52 24 grooves | Material specifications: Sintere...
€1.827,10 €1.510,00 €1.735,70 €1.434,46
You save 5%
Showing 1 - 24 of 84

Landini Legend 145 parts for the jobs that come round again

Sooner or later, every Legend 145 owner deals with the same handful of repairs: the clutch, the water pump, a mirror knocked off on a gatepost. For those jobs there are more than 90 replacement parts that fit this model, from GRANIT, LUK, Walterscheid, Cobo and GRAMMER.

Cooling system: water pump, hoses and gaskets

Once the water pump starts weeping from the tell-tale hole or the bearing gets noisy, replacement is the only fix. Alongside water pumps you will find radiator hoses, O-rings for the water circuit and the thermostat gasket.

A tip that saves a lot of grief: never reuse the old gasket or O-ring when fitting a water pump, and flush the system if the old coolant is brown or cloudy. Dirt and scale will otherwise chew up the new pump seal in no time. Refill with the correct coolant and let the engine warm up with the cap off so trapped air can escape.

Clutch

For the clutch there are double clutch pressure plates and clutch plates, including a double clutch made specifically for the Legend. If you are splitting the tractor anyway, renew the plate and pressure plate together and take a look at the flywheel and the rear crankshaft seal while you are there.

Cab, controls and hitch

On a tractor this size, a clear view behind is essential. There are mirrors and telescopic mirror brackets, so you can push the mirror further out when a wide implement is on the back. For the driver there are tractor seats from GRAMMER and PROBOSS among others.

On the dash you will find push button switches, such as the one for four-wheel drive. At the rear there are flange hitches, a drawbar with ball and a top drawbar.

A flange hitch is bolted to the tractor. When fitting one, check that the hole pattern of the new flange matches the old one and use new bolts of the correct grade. Tighten them with a torque wrench and check them again after the first few days of work, because a flange that beds in can work loose without you noticing.

Not sure which version you need

Check the type plate on your Legend and note the model and chassis number. Then look for a reference number on the old part. On a water pump or clutch plate it is often stamped into the metal. With mirrors and brackets, also check the side, left or right.

For other Landini tractors, go to Landini parts, where each model has its own overview.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart