Lindner Geotrac 104 parts for hitches, seats and electrics

More than 40 parts on this page fit the Lindner Geotrac 104. They include coupling components from Scharmüller, ROCKINGER and Walterscheid, seats from GRAMMER and PROBOSS, and electrical parts for charging and starting.

Choosing a coupling

The rear of the Geotrac 104 takes a rail system, so you can switch between couplings depending on what you tow. The range here includes:

• Automatic hitches and jaw couplings for trailers and implements with a towing eye, which lock automatically as the eye slides in
• Ball hitches and replacement balls for heavy trailers with a ball socket, giving a quiet, low play connection
• Piton Fix pins for trailers with a large eye
• Top drawbars for coupling higher up
• A trailer drawbar and trailer coupling for the trailer side

Adapter plates, including a height adjustable version, let you set the coupling point at the right height or adapt the hole pattern to a different system.

Measure first

Confirm the model on the type plate, then measure. Rail width, locking pin diameter and, for adapter plates, the hole pattern decide whether a part fits. If the old coupling carries a Scharmüller, ROCKINGER or Walterscheid number, compare it directly with the references shown for each product.

Checking a jaw coupling

On an automatic hitch the locking mechanism should snap fully home without hesitation. If it sticks, or the indicator pin stays halfway, clean and lightly lubricate the mechanism and inspect the jaw for cracks. A worn coupling pin causes knocks when pulling away and braking, which both trailer and tractor will feel.

Keep the ball greased

A ball hitch needs grease. Apply a thin layer to the ball and inside the trailer socket at regular intervals. A dry ball wears quickly, creaks on corners and soon develops play. Wipe off old grease full of grit before adding fresh, otherwise it acts like grinding paste.

Seats and electrics

For the cab there are air suspended GRAMMER seats such as the Maximo Professional and seats from PROBOSS. Check the mounting points on your console before ordering. On the electrical side, alternators and a starter motor are available. If the battery is not charging, measure the charging voltage with the engine running and check the earth cable before blaming the alternator.

Other Lindner tractors

Parts for the rest of the Lindner line up are gathered under Lindner parts, handy if more than one model from this maker works on your farm.