Menu
EUR

Renault 75-32 tractor parts & technical data

There is no need to hunt for Renault 75-32 parts one by one. This page shows more than 100 of them for the R series, including trailer couplings and lighting.

103 parts found for Renault 75-32
Show:
GRANIT Cylinder head gasket set cylinder head gasket 1,4 mm thick Renault, Fendt
5%
GRANIT
Cylinder head gasket set cylinder head gasket 1,4 mm thick Renault, Fendt
€42,86 €35,42 €40,70 €33,64
 
GRANIT Connecting rod bush Ø 35 mm Case IH, Renault, Steyr
GRANIT
Connecting rod bush Ø 35 mm Case IH, Renault, Steyr
Dimensions: 35 mm.
€28,80 €23,80
 
GRANIT Connecting rod bush outer-Ø 38 mm, inner-Ø 32 mm Fendt, Renault
5%
GRANIT
Connecting rod bush outer-Ø 38 mm, inner-Ø 32 mm Fendt, Renault
Dimensions: 32 mm.
€33,13 €27,38 €31,45 €25,99
 
GRAMMER Tractor seat Maximo Basic MSG85/721
5%
GRAMMER
Tractor seat Maximo Basic MSG85/721
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. ...
€1.305,84 €1.079,21 €1.240,50 €1.025,21
 
Cobo Rear light left / right 120 x 80 x 56 mm, 12 V
10%
Cobo
Rear light left / right 120 x 80 x 56 mm, 12 V
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Cable entry via grommet. W...
€35,83 €29,61 €32,40 €26,78
 
GRANIT Ball joint 95 mm, M16 x 1,5, M24 x 1,5, taper 18 - 20,2 mm
5%
GRANIT
Ball joint 95 mm, M16 x 1,5, M24 x 1,5, taper 18 - 20,2 mm
A: 95 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20...
€40,33 €33,33 €38,30 €31,65
 
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
 
Main bearing standard Ø 70 mm Fendt, Case IH, Renault, Steyr
5%
Main bearing standard Ø 70 mm Fendt, Case IH, Renault, Steyr
Dimensions: Ø 70 mm.
€33,70 €27,85 €32,00 €26,45
 
ROCKINGER Flange hitch automatic deep jaw 36 mm, 140 x 80 mm, M17
23%
ROCKINGER
Flange hitch automatic deep jaw 36 mm, 140 x 80 mm, M17
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value...
€1.378,49 €1.139,25 €1.055,50 €872,31
 
Tank cap with ventilation, tank collar Ø 110 mm
Tank cap with ventilation, tank collar Ø 110 mm
Filler neck Ø: 110 mm.
€35,20 €29,09
 
GRANIT Oil sump gasket 4 cylinder Renault 651-904, Ceres 65-95
5%
GRANIT
Oil sump gasket 4 cylinder Renault 651-904, Ceres 65-95
€39,35 €32,52 €37,35 €30,87
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
Ball joint taper 18 - 20,2 mm, 100 mm, M16 x 1,5, M16 x 1,5 L
5%
Ball joint taper 18 - 20,2 mm, 100 mm, M16 x 1,5, M16 x 1,5 L
A: 100 mm. C: M16 x 1,5 mm. D: M16 x 1,5 L mm. E: 18 mm. F: 20,2 mm. Taper: 18 -...
€41,06 €33,93 €39,00 €32,23
 
LUK Pilot bearing 17 x 40 x 12 mm
LUK
Pilot bearing 17 x 40 x 12 mm
Dimensions: 17 x 40 x 12 mm. Menke no.: 96442.
€26,30 €21,74
 
Bosch/Rexroth Double pump 14 + 8 cm³/rpm., left, taper 1:5, Ø 17 x 17 Renault
5%
Bosch/Rexroth
Double pump 14 + 8 cm³/rpm., left, taper 1:5, Ø 17 x 17 Renault
Output volume: 14 + 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of ro...
€671,99 €555,36 €638,35 €527,56
 
GRANIT Heating element engine preheater Fendt, Renault
5%
GRANIT
Heating element engine preheater Fendt, Renault
€205,40 €169,75 €195,10 €161,24
 
V-belt Fiat, Renault
V-belt Fiat, Renault
€19,00 €15,70
 
Radiator cap Ø 57 mm, height 20 mm
Radiator cap Ø 57 mm, height 20 mm
Neck Ø: 57 mm. Height: 20 mm.
€37,80 €31,24
 
GRANIT Oil pump line-Ø 27 mm Renault, Fendt
5%
GRANIT
Oil pump line-Ø 27 mm Renault, Fendt
Dimensions: Pipe Ø 27 mm.
€577,22 €477,04 €548,35 €453,18
 
GRANIT Connecting rod bearing standard, Ø 63 mm
5%
GRANIT
Connecting rod bearing standard, Ø 63 mm
Dimensions: Ø 63 mm.
€35,34 €29,21 €33,55 €27,73
 
Scharmüller Drawbar automatic rail width 335 mm, coupling pin 38 mm
16%
Scharmüller
Drawbar automatic rail width 335 mm, coupling pin 38 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.102,68 €911,31 €928,75 €767,56
 
GRANIT Temperature sender 6 - 24 V, M14 x 1,5, wrench size 19 mm, black
10%
GRANIT
Temperature sender 6 - 24 V, M14 x 1,5, wrench size 19 mm, black
Version: Connection type: 1 x 6.3 mm, Colour: black, Thread: M14 x 1.5, AF: 19.0...
€53,36 €44,10 €48,25 €39,88
 
Showing 25 - 48 of 103

Renault 75-32 parts for engine rebuilds, hydraulics and the hitch

A Renault 75-32 from the R series stays at work because someone keeps spanners on it. Plenty of owners rebuild the engine themselves, replace the hydraulic pump or swap in a better seat. For jobs like these, this page has more than 100 new replacement parts that fit the Renault 75-32, from GRANIT, Walterscheid, GRAMMER, ROCKINGER and Bosch/Rexroth. They are aftermarket parts rather than dealer stock, and they keep an older tractor going for years.

Engine bearings and injection

For the bottom end there are connecting rod bearings and main bearings. Injection nozzles cover the fuel side, and there is a stop cable for shutting the engine down. The cooling system gets radiator hoses, such as the top hose at the thermostat, and V-belts for engine cooling.

Before you order bearings, measure the crankshaft journals with a micrometer. If the crank has been reground at some point, you need undersize shells, and a standard bearing will not do. The back of the old shells is often stamped with the size. After fitting, check the running clearance with Plastigage and oil the shells generously during assembly.

When you fit an injection nozzle, always use a new copper sealing washer under it. The old washer has been crushed and will not seal properly, so combustion gas blows past and the nozzle seizes in the head, which turns the next removal into a long job.

Hydraulics, linkage and steering

  • A Bosch/Rexroth double pump for the hydraulic system
  • Stabilizer struts and spindles for the three-point linkage
  • Steering ball joints for the front axle
  • Tubes for pipework

Hitch and seat

For hitching there are drawbars with a ball, top drawbars and flange hitches. In the cab, an air suspended GRAMMER tractor seat can replace the old one, which makes a real difference on an older tractor with stiff suspension.

Related R series models

Renault's R series includes many closely related models, so read the serial plate and compare the old part with the product description. Separate pages exist for the Renault 65-12, Renault 65-32, Renault 68-12, Renault 70-12, Renault 75-12 and Renault 681, which helps if you look after more than one Renault. The 77-12 and the 85-34 also belong to this line. Every other Renault tractor in our range can be reached via Renault parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart