Menu
EUR

Renault Ceres 85 tractor parts & technical data

Need a trailer coupling, electrics or front axle parts for a Renault Ceres 85? More than 160 parts for this Ceres series tractor are listed on this page.

153 parts found for Renault Ceres 85
Show:
MANN-FILTER Air filter C17337/2, AF25557, inner CF990/2
MANN-FILTER
Suitable secondary element 565CF990.2 More
Suitable secondary element 565CF990.2
€42,70 €35,29
Walterscheid Flange hitch automatic 37 mm, 140 x 80 mm, M17, 2700 kg, 82,4 kN
€1.355,20 €1.120,00 €1.118,00 €923,97
You save 18%
LUK Clutch kit double plate connection Renault 58-32 - 90-34, 700 - 850
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458231003312, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€1.119,31 €925,05 €1.012,70 €836,94
You save 10%
LUK Clutch plate 310UKF 22 x 25 mm, 13 splines John Deere, Renault
LUK
Material specifications: Organic clutch lining | Dimensions (mm): 22 x 25 13 grooves More
Material specifications: Organic clutch lining | Dimensions (mm): 22 x...
€199,27 €164,69 €189,30 €156,45
You save 5%
LUK Double clutch 310/310TGU 40 x 45 mm, 16 splines sintered, flat
LUK
Flywheel design: Flat | Material specifications: Sintered clutch lining | Dimensions (mm): 40 x 45 16 grooves More
Flywheel design: Flat | Material specifications: Sintered clutch linin...
€1.222,33 €1.010,19 €1.105,90 €913,97
You save 10%
GRANIT Clutch plate 280 22 x 25 mm, 13 splines
GRANIT
Dimensions (mm): 22 x 25, 13 grooves | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 13 grooves | Additional information: Made in...
€120,88 €99,90 €114,80 €94,88
You save 5%
O-ring thermostat inner-Ø 20 mm, koorddikte 2 mm Fendt, Renault
Inner Ø (mm): 20 | Mechanical: No | Temperature range (°C): -30 to +100 | Cord thickness d2 (mm): 2 | Hardness (Shore): 70 | Material: Nitrile rubbe... More
Inner Ø (mm): 20 | Mechanical: No | Temperature range (°C): -30 to +...
€0,34 €0,28
GRANIT Double clutch DuT 310 40 x 45, 16 splines, flywheel 3 Renault
GRANIT
Flywheel dimension (mm): 3 (erhöht) | Additional information: Made in Germany | Dimensions (mm): 40 x 45, 16 grooves More
Flywheel dimension (mm): 3 (erhöht) | Additional information: Made in...
€796,48 €658,25 €756,65 €625,33
You save 5%
Elring Cylinder head gasket set 1,4 mm, engine D226
€52,70 €43,55 €50,00 €41,32
You save 5%
Ball joint 200 mm, M18 x 1,5, M18 x 1,5, taper 20 - 22 mm
A: 200 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 200 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€60,69 €50,16 €57,65 €47,64
You save 5%
Wheel brake cylinder DOT 4 John Deere, Renault
€110,32 €91,17 €104,80 €86,61
You save 5%
KS Piston ring set Ø 105 mm, 3 mm / 2 mm / 2 mm / 4 mm Fendt, Renault
KS
Dimensions: 4 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 2 mm / 4 mm. More
Dimensions: 4 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 2 mm ...
€76,59 €63,30 €72,75 €60,12
You save 5%
KS Connecting rod bearing Ø 63 mm, width 27 mm
€61,42 €50,76 €58,30 €48,18
You save 5%
GRANIT Seal water pump John Deere, Renault
Stop solenoid switch
€36,78 €30,40 €34,90 €28,84
You save 5%
Thrust washer set standard John Deere, Renault
€38,64 €31,93 €36,70 €30,33
You save 5%
GRANIT Piston ring set 4 rings, Ø 105 mm, Renault, Fendt
GRANIT
Dimensions: 4 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 2 mm / 4 mm. More
Dimensions: 4 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 2 mm ...
€60,58 €50,07 €57,55 €47,56
You save 5%
GRANIT Injection nozzle Fendt Farmer 102-311, Renault Ceres 65-95
€36,06 €29,80 €34,25 €28,31
You save 5%
GRANIT Injection nozzle Renault Ceres 65-95, R 58-12 - 1451-4, Fendt Farmer 100
GRANIT
Type formula: DLL150S393, 0433270114. Bosch no.: 2580433270114. More
Type formula: DLL150S393, 0433270114. Bosch no.: 2580433270114.
€37,51 €31,00 €35,60 €29,42
You save 5%
Bosch/Rexroth Double pump anticlockwise 19 + 11 cm³/rpm. Renault
Bosch/Rexroth
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of rotation: Anticlockwise. Line connection suction side: Ø 40mm, 4-Loch... More
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Dir...
€774,32 €639,93 €735,60 €607,93
You save 5%
Bosch/Rexroth Hydraulic pump anticlockwise 22,5 + 11 cm³/rpm. John Deere, Renault
Bosch/Rexroth
Output volume: 22,5 + 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Anticlockwise. Bosch no.: 0510765347. OEM version: 770003881... More
Output volume: 22,5 + 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Dir...
€773,55 €639,30
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€26,20 €21,65
Showing 49 - 72 of 153

Renault Ceres 85 parts for the engine, clutch and hydraulics

Many a Ceres 85 has worked on the same farm for a long time. Sooner or later the engine smokes on a cold start, the linkage lifts sluggishly or the alternator stops keeping the battery charged. For jobs like these there are more than 160 Renault Ceres 85 parts on this page, from GRANIT, LUK, Walterscheid, MAHLE and Elring.

Injectors, bearings and gaskets

On the fuel side you can fit injection nozzles and O-rings for the feed pump. Going further into the engine, there are connecting rod bearings, cylinder head gasket sets and individual gaskets. An alternator keeps the battery topped up.

A tip on injectors: whenever you take them out, renew the copper sealing washers underneath and have the opening pressure tested if you are unsure. A dribbling nozzle causes white or black smoke on a cold start and, over time, washes the oil film off the cylinder wall. Tighten them to the specified torque afterwards, not by feel.

If the battery charges poorly, measure the voltage across the battery terminals with the engine running before you replace the alternator. A slack belt or a bad earth connection gives the same symptoms. Connecting rod bearing shells are never replaced one at a time, and the crank journal should always be checked for scoring.

Hydraulic pump and seals

For the hydraulics there is a double pump, along with seals for the hydraulic pump. If the linkage rises slowly or drops back, check the filter and oil level first. If both are fine, a leaking pump seal or a worn pump is next in line.

Clutch, steering and cooling

For the clutch there are complete clutch kits with a double plate design, double clutch assemblies and separate clutch plates, including one for the PTO. Flange hitches and drawbars fit the rear. Ball joints take care of the steering, and radiator hoses, for example for the oil cooler, cover the cooling side.

Matching the part

The type plate on the Ceres 85 gives the type and chassis number. For engine and clutch parts the engine number helps as well, because it settles bearing size and gasket thickness. A number on the old part is a second reference point, particularly for an alternator or clutch plate.

The Ceres line also includes the Ceres 95. For that type and every other Renault tractor, start at Renault parts, where each type from the brand is shown with its own parts. This page sticks to what fits the Ceres 85.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart