Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Fendt Farmer 308 (Typ 178)

Looking for parts for your Fendt Farmer 308 (Typ 178) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

1063 parts found for Fendt Farmer 308 (Typ 178)
Show:
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€11,98 €9,90 €11,74 €9,70
You save 2%
GRANIT Seal kit steering valve SB7 3-hole Fendt
€64,20 €53,06 €62,92 €52,00
You save 2%
GRANIT Window handle left Fendt Farmer 303 (Typ 152), GT 380 (Typ 380)
€18,36 €15,17 €17,99 €14,87
You save 2%
GRANIT Replacement key lock number 7720 Fendt
GRANIT
Locking number: 7720. More
Locking number: 7720.
€5,82 €4,81 €5,70 €4,71
You save 2%
GRANIT Impulsgeverset Fendt Farmer 102-309, GT 345-380
€590,81 €488,27 €502,19 €415,03
You save 15%
GRANIT Lift arm shaft Fendt Farmer 5, Farmer 105-108, Farmer 304-311
€971,63 €803,00 €825,89 €682,55
You save 15%
GRANIT Bush left lift arm shaft 55 x 70 x 90,6 mm Fendt
GRANIT
Dimensions: 55 x 70 x 90.6 mm. More
Dimensions: 55 x 70 x 90.6 mm.
€79,00 €65,29 €77,42 €63,98
You save 2%
GRANIT Window profile door screen left, lower Fendt
GRANIT
Description: Türscheibe links unten. More
Description: Türscheibe links unten.
€126,31 €104,39 €119,99 €99,17
You save 5%
GRANIT Double nozzle screenwash system Fendt Farmer 5, Xylon 524
€20,34 €16,81 €19,93 €16,47
You save 2%
GRANIT Pin for lifting strut top 19 x 92 mm Fendt
GRANIT
Dimensions: 19 x 92 mm. More
Dimensions: 19 x 92 mm.
€21,02 €17,37 €20,60 €17,02
You save 2%
GRANIT Pin for lower link support 22 x 80 mm Fendt
GRANIT
Dimensions: 22 x 80 mm. More
Dimensions: 22 x 80 mm.
€32,97 €27,25 €32,31 €26,70
You save 2%
GRANIT Support disc for front grille hood Fendt
€6,90 €5,70 €6,76 €5,59
You save 2%
GRANIT Plug hood Fendt Farmer 304-312, Favorit 509-515
€10,65 €8,80 €10,44 €8,63
You save 2%
GRANIT Fender extension rear right 10 mm Fendt
GRANIT
Dimensions: 10 mm. More
Dimensions: 10 mm.
€198,58 €164,12
GRANIT Fender extension rear left 10 mm Fendt
GRANIT
Dimensions: 10 mm. More
Dimensions: 10 mm.
€190,54 €157,47
GRANIT Fender extension rear left 100 mm Fendt
GRANIT
Dimensions: 100 mm. More
Dimensions: 100 mm.
€238,46 €197,07
GRANIT Valve
GRANIT
Brand: Fendt. More
Brand: Fendt.
€43,66 €36,08
Walterscheid Piton Fix rail width 311 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.755,71 €1.451,00 €1.492,35 €1.233,35
You save 15%
ROCKINGER Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Colour: AGCO grey. Description: Ball hitch wit... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.327,76 €1.097,32 €1.123,70 €928,68
You save 15%
GRANIT Mirror holder Fendt Farmer 240 S (Typ 294), GT 395
€20,70 €17,11 €20,29 €16,77
You save 2%
ROCKINGER Flange hitch automatic DOWEL PIN 30,6 mm, 140 x 80 mm, M17
ROCKINGER
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 82 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pin:... More
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 k...
€830,06 €686,00 €702,49 €580,57
You save 15%
GRANIT Temperature switch, oil temperature 102 °C, M14 x 1,5, 6 - 24 V
GRANIT
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1.5, Contact closes as the temperature increases, Outlet: 1-pin via earth, Switchi... More
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1....
€83,60 €69,09 €81,93 €67,71
You save 2%
GRANIT Temperature sender 6 - 24 V, M14 x 1,5, wrench size 19 mm, black
GRANIT
Version: Connection type: 1 x 6.3 mm, Colour: black, Thread: M14 x 1.5, AF: 19.0 mm. Colour: Black. Thread: M14 x 1.5. AF: 19 mm. Connection type: 1 x... More
Version: Connection type: 1 x 6.3 mm, Colour: black, Thread: M14 x 1.5...
€50,87 €42,04
GRANIT Tractormeter digital display combi-device
Showing 337 - 360 of 1063

Fendt Farmer 308 (Typ 178) specs

The Fendt Farmer 308 with type designation Typ 178 covers the 308 LS and 308 LSA from the Farmer 300 series, built from 1980 to 2000. The "LS" indicates a higher specification level, while the "A" in LSA refers to all-wheel drive. The Typ 178 is therefore the LS/LSA line of the Farmer 308, distinct from the later compact C line (Typ 118). Over the twenty years of production, several revisions were carried out, gradually improving both power output and transmission.

Engine

Power comes from an MWM D 226.4.2, a water-cooled four-stroke four-cylinder inline engine with direct injection, overhead valves, pressure lubrication, inline injection pump (Bosch PES 4 A 80 D 320/3 RS 1301), multi-hole injector nozzles, centrifugal governor and dry cylinder liners. Cooling is handled by a thermostatically controlled dual-circuit system. Displacement is 4.2 litres (bore x stroke: 105 x 120 mm), rated engine speed is 2,400 rpm. Maximum torque was initially 275 Nm at 1,498 rpm.

From 1989 the turbocharged MWM TD 226 B-4 was used (rated speed 2,250 rpm, 26% torque increase). Power rose from 78 hp (1980) to 82 hp in 1989 and further to 86 hp (approx. 63 kW) in 1991. Maximum torque increased from 321 Nm at 1,550 rpm (1989) to 337 Nm at 1,550 rpm (1991). From approximately the 1989 model year, wet cylinder liners were used.

Transmission and travel speeds

The 308 LS and 308 LSA were delivered with a fully synchronised gearbox. The first generation had 15 forward and 4 reverse gears (15/4), with two overdrive speeds for 25/30 or 30/40 km/h. In 1984 this became a 21/6 gearbox, followed in 1991 by the optional 21/21 reverser transmission. Top speed is 30 km/h as standard, with an optional 40 km/h version. Shifting is handled via a Voith fluid coupling type 358 TD-F (from 1989: 360 TD-F2, from 1990: 360 TD-F1) and a Fichtel & Sachs single-disc dry clutch type GT NX 310 (from 1984: GTF 320 N or GTF 320 N-295).

The front axle of the LSA is a load-switchable ZF oscillating axle type APL-1552 (from 1984: APL-335, from 1989: APL-735, from 1990: APL-700 F3), with a lateral driveshaft and self-locking "Locomatik" differential.

Hydraulics and lift capacity

The hydraulic system is a Fendt block-type control hydraulic with mechanical lift control (MHR) and top link sensing. The three-point linkage is category II, available on request with a quick coupler. A single-acting working cylinder with an 86 mm bore and 137.4 mm stroke is fitted as standard; optionally two additional working cylinders with a 45 mm bore and 181 mm stroke.

  • Early pump flow: 39.95 l/min at 175 bar (as three-circuit system 66 l/min)
  • Max. early lift capacity: 3,490 kp / lift travel 660 mm
  • From 1984: 180 bar working pressure, max. lift capacity 3,820 kp
  • Later model: 71 l/min at 180 bar, max. lift capacity 4,420 kp
  • Optional front hydraulics (cat. II): two working cylinders 28 mm bore, 162 mm stroke, max. lift capacity 24.6 kN

PTO

The PTO is switchable to 540, 750 and 1,000 rpm. A ground-speed PTO is available on request (9.6 PTO revolutions per wheel revolution). Maximum permissible torque: 1,750 Nm at 540 rpm, 1,100 Nm at 750 rpm and 900 Nm at 1,000 rpm. From 1991, front and rear axle are electrohydraulically switchable.

Dimensions and weights

  • Length: approx. 4.0 m
  • Width: approx. 2.14 m
  • Height: approx. 2.7 m
  • Wheelbase: approx. 2.28 m
  • Unladen weight 308 LS: approx. 3,795 kg / permissible total weight: 6,500 kg
  • Unladen weight 308 LSA: approx. 3,870 kg / permissible total weight: 6,500 kg

Tyres and brakes

Standard tyre sizes are 13.6R24 front and 16.9R34 rear. The parking brake is an internal shoe brake on the differential output shafts. A single- or dual-circuit compressed air braking system was available as an option. At 40 km/h, drum brakes in the front wheels are mandatory; at 30 km/h they are optional.

Cab

The tractor comes with a sound-insulated comfort cab with a noise level of 73.5 dB(A), an air-suspended seat, tinted glass, adjustable front, side and rear windows and an opening roof hatch. Standard equipment includes heating with a three-speed blower, interior lighting, a radio pre-installation with two speakers, electrically adjustable exterior mirrors, digital instruments and rear work lights. Optional extras include air conditioning (later versions), front work lights, particulate filter and H4 supplementary front lighting.

Production numbers Typ 178

The 308 LS was built in the following series: T 178.010 (1980-1984, 2,633 units), T 178.011 (1984-1988, 596 units), T 178.050 (1989, 37 units), T 178.060 (1989-1990, 73 units), T 178.061 (1990-1991, 50 units), T 178.062/063/064 (1991-1993, 14/24/28 units) and T 178.065 (1993-1998, 206 units). The 308 LSA ran from T 178.210 (1980-1984, 5,498 units) and T 178.211 (1984-1988, 2,964 units) through to T 178.265 (1993-1998, 2,263 units).

Parts and brands for the Fendt Farmer 308 (Typ 178)

We stock a wide range of parts for the Fendt Farmer 308 Typ 178, including engine parts, filters, brake parts, hydraulic components, exhaust parts, electrical components and cab parts. We work with brands such as Granit, Agco Parts, Bosch, Hella, Mahle, Mann-Filter, Kramp, Grammer, Cobo, Scharmüller and Walterscheid, so there is always a choice between an original part or a well-fitting alternative.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart