Web Analytics
Fendt Farmer 308 (Typ 178) tractor parts & specs
Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Fendt Farmer 308 (Typ 178)

Looking for parts for your Fendt Farmer 308 (Typ 178) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

796 Products
Show:
Control unit Bosch system SB7
This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed cylinder co... More
This auxiliary control unit is a four-position device that can be used...
€559,59 €462,47 €475,65 €393,10
You save 15%
Mudguard front, for tyres 425/75-20
Width: 46 mm. Length L: 152 mm. More
Width: 46 mm. Length L: 152 mm.
€200,63 €165,81
HELLA Rear light right Fendt, John Deere, Kubota
HELLA
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S, 303, 304, 305, 306, 307 (Typn 170, 175), 308 (Typn 178, 308), 309 (Typn 186, 3... More
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S...
€22,16 €18,31 €18,76 €15,50
You save 15%
Alternator 14 V / 65 A - Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€177,88 €147,01 €165,43 €136,72
You save 7%
Handle for AGCO Fendt
€29,34 €24,25 €27,87 €23,03
You save 5%
Control unit This control valve is used in the tractor to control and regulate the power lift unit. It can also be used to lift and lower implements continuously, to maintain a predetermined position, or to achieve optimum utilisation of the tractor power
Technical data: Max. operating pressure: 220 bar. Nominal flow rate: max. 70 l/min. Tightening torque: 30 Nm. Connections: M18 x 1.5. Dimensions: 210 ... More
Technical data: Max. operating pressure: 220 bar. Nominal flow rate: m...
€993,14 €820,78 €844,17 €697,66
You save 15%
Main headlight insert left and right
Bulb: 12V55W / H4. Nominal voltage: 12 V. Light function: with high beam, with low beam, without position light. More
Bulb: 12V55W / H4. Nominal voltage: 12 V. Light function: with high be...
€30,66 €25,34 €29,13 €24,07
You save 5%
Diaphragm feed pump For in-line injection pump, supplied with O-ring
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. To fit: Fendt Farmer, Favorit, Engine: D20... More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€26,56 €21,95 €25,23 €20,85
You save 5%
Sealing profile for cab frame
€128,84 €106,48 €119,82 €99,02
You save 7%
Brake light switch mechanical
To fit as: Fendt Farmer 2 S, 3 S, 4 S, 5 S, 102, 103, 104, 105, 106, 108, 200 S, 200 V, 201 S, 203 P, 203 V, 204 P, 205 P, Farmer 303 (Typ 152), Far... More
To fit as: Fendt Farmer 2 S, 3 S, 4 S, 5 S, 102, 103, 104, 105, 106, ...
€76,35 €63,10 €72,53 €59,94
You save 5%
Installation cable There are two ways to install the mini contact plug. Firstly, it can be attached to the radiator grille or the vehicle’s air intake using a mounting block. Secondly, a hole can be drilled using a hole saw (see Calix tools). Both metho
€159,55 €131,86 €148,38 €122,63
You save 7%
Mudguard attachment
€19,60 €16,20 €18,62 €15,39
You save 5%
Centa Elastic clutch including accessories
Centa
To fit as: Fendt Farmer 304 (type 158), 307 (type 117, 307), 308 (type 118, 178, 308), 309 (type 119, 186, 309), 310 (type 310), 311 (type 311), 312 (... More
To fit as: Fendt Farmer 304 (type 158), 307 (type 117, 307), 308 (type...
€302,55 €250,04 €257,17 €212,54
You save 15%
Bonnet catch medium length 120 mm
Length: 120 mm More
Length: 120 mm
€2,12 €1,75 €2,01 €1,66
You save 5%
Mirror 250 x 155 mm
Tractor type: Case IH 433, 533, 633, 733, 833, 933, 3210, 3220, 3230, 4210, 4220, 4230, 4240, 440, 540, 640, 740, 743, 644, 744, 745 S, 840, 844, 844 ... More
Tractor type: Case IH 433, 533, 633, 733, 833, 933, 3210, 3220, 3230, ...
€26,28 €21,72 €24,97 €20,64
You save 5%
Gasket set to fit as 85219002, G178960022011, G178960021011
Technical data: 4 O-rings each 17.3 x 2.35, 3 O-rings 11 x 1.5 each, 1 O-ring each 45 x 2.5 / 31.4 x 2 / 22.5 x 2.5 / 8.8 x 1.65 / 5 x 2.4 / 5.2 x 1.5... More
Technical data: 4 O-rings each 17.3 x 2.35, 3 O-rings 11 x 1.5 each, 1...
€25,29 €20,90 €24,03 €19,86
You save 5%
GRAMMER Compressor 12V
GRAMMER
suitable for: MSG93, MSG95, MSG97. More
suitable for: MSG93, MSG95, MSG97.
€334,47 €276,42 €284,30 €234,96
You save 15%
HELLA Main headlight Left/right
HELLA
Bulb: 12V60/55W / H4, 24V75/70W / H4. Colour: Surround: black. Width: 182 mm. Height: 102 mm. Material: Plastic. Dimensions W x H x D: 182 x 102 x 88 ... More
Bulb: 12V60/55W / H4, 24V75/70W / H4. Colour: Surround: black. Width: ...
€64,01 €52,90 €60,85 €50,29
You save 5%
Window profile door screen right top
To fit as Fendt. More
To fit as Fendt.
€136,61 €112,90 €127,05 €105,00
You save 7%
METARO Front grille
€107,54 €88,88 €62,95 €52,02
You save 41%
LED work light
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x 76 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€69,02 €57,04 €65,57 €54,19
You save 5%
MANN-FILTER Engine oil filter W940
€14,98 €12,38 €9,49 €7,84
You save 37%
Stabilus Gas struts 223.5 mm | 60 mm | 120N
Stabilus
To fit as: Fendt Roof hatch More
To fit as: Fendt Roof hatch
€21,56 €17,82 €20,48 €16,93
You save 5%
Showing 1 - 24 of 796

Fendt Farmer 308 (Typ 178) specs

The Fendt Farmer 308 with type designation Typ 178 covers the 308 LS and 308 LSA from the Farmer 300 series, built from 1980 to 2000. The "LS" indicates a higher specification level, while the "A" in LSA refers to all-wheel drive. The Typ 178 is therefore the LS/LSA line of the Farmer 308, distinct from the later compact C line (Typ 118). Over the twenty years of production, several revisions were carried out, gradually improving both power output and transmission.

Engine

Power comes from an MWM D 226.4.2, a water-cooled four-stroke four-cylinder inline engine with direct injection, overhead valves, pressure lubrication, inline injection pump (Bosch PES 4 A 80 D 320/3 RS 1301), multi-hole injector nozzles, centrifugal governor and dry cylinder liners. Cooling is handled by a thermostatically controlled dual-circuit system. Displacement is 4.2 litres (bore x stroke: 105 x 120 mm), rated engine speed is 2,400 rpm. Maximum torque was initially 275 Nm at 1,498 rpm.

From 1989 the turbocharged MWM TD 226 B-4 was used (rated speed 2,250 rpm, 26% torque increase). Power rose from 78 hp (1980) to 82 hp in 1989 and further to 86 hp (approx. 63 kW) in 1991. Maximum torque increased from 321 Nm at 1,550 rpm (1989) to 337 Nm at 1,550 rpm (1991). From approximately the 1989 model year, wet cylinder liners were used.

Transmission and travel speeds

The 308 LS and 308 LSA were delivered with a fully synchronised gearbox. The first generation had 15 forward and 4 reverse gears (15/4), with two overdrive speeds for 25/30 or 30/40 km/h. In 1984 this became a 21/6 gearbox, followed in 1991 by the optional 21/21 reverser transmission. Top speed is 30 km/h as standard, with an optional 40 km/h version. Shifting is handled via a Voith fluid coupling type 358 TD-F (from 1989: 360 TD-F2, from 1990: 360 TD-F1) and a Fichtel & Sachs single-disc dry clutch type GT NX 310 (from 1984: GTF 320 N or GTF 320 N-295).

The front axle of the LSA is a load-switchable ZF oscillating axle type APL-1552 (from 1984: APL-335, from 1989: APL-735, from 1990: APL-700 F3), with a lateral driveshaft and self-locking "Locomatik" differential.

Hydraulics and lift capacity

The hydraulic system is a Fendt block-type control hydraulic with mechanical lift control (MHR) and top link sensing. The three-point linkage is category II, available on request with a quick coupler. A single-acting working cylinder with an 86 mm bore and 137.4 mm stroke is fitted as standard; optionally two additional working cylinders with a 45 mm bore and 181 mm stroke.

  • Early pump flow: 39.95 l/min at 175 bar (as three-circuit system 66 l/min)
  • Max. early lift capacity: 3,490 kp / lift travel 660 mm
  • From 1984: 180 bar working pressure, max. lift capacity 3,820 kp
  • Later model: 71 l/min at 180 bar, max. lift capacity 4,420 kp
  • Optional front hydraulics (cat. II): two working cylinders 28 mm bore, 162 mm stroke, max. lift capacity 24.6 kN

PTO

The PTO is switchable to 540, 750 and 1,000 rpm. A ground-speed PTO is available on request (9.6 PTO revolutions per wheel revolution). Maximum permissible torque: 1,750 Nm at 540 rpm, 1,100 Nm at 750 rpm and 900 Nm at 1,000 rpm. From 1991, front and rear axle are electrohydraulically switchable.

Dimensions and weights

  • Length: approx. 4.0 m
  • Width: approx. 2.14 m
  • Height: approx. 2.7 m
  • Wheelbase: approx. 2.28 m
  • Unladen weight 308 LS: approx. 3,795 kg / permissible total weight: 6,500 kg
  • Unladen weight 308 LSA: approx. 3,870 kg / permissible total weight: 6,500 kg

Tyres and brakes

Standard tyre sizes are 13.6R24 front and 16.9R34 rear. The parking brake is an internal shoe brake on the differential output shafts. A single- or dual-circuit compressed air braking system was available as an option. At 40 km/h, drum brakes in the front wheels are mandatory; at 30 km/h they are optional.

Cab

The tractor comes with a sound-insulated comfort cab with a noise level of 73.5 dB(A), an air-suspended seat, tinted glass, adjustable front, side and rear windows and an opening roof hatch. Standard equipment includes heating with a three-speed blower, interior lighting, a radio pre-installation with two speakers, electrically adjustable exterior mirrors, digital instruments and rear work lights. Optional extras include air conditioning (later versions), front work lights, particulate filter and H4 supplementary front lighting.

Production numbers Typ 178

The 308 LS was built in the following series: T 178.010 (1980-1984, 2,633 units), T 178.011 (1984-1988, 596 units), T 178.050 (1989, 37 units), T 178.060 (1989-1990, 73 units), T 178.061 (1990-1991, 50 units), T 178.062/063/064 (1991-1993, 14/24/28 units) and T 178.065 (1993-1998, 206 units). The 308 LSA ran from T 178.210 (1980-1984, 5,498 units) and T 178.211 (1984-1988, 2,964 units) through to T 178.265 (1993-1998, 2,263 units).

Parts and brands for the Fendt Farmer 308 (Typ 178)

We stock a wide range of parts for the Fendt Farmer 308 Typ 178, including engine parts, filters, brake parts, hydraulic components, exhaust parts, electrical components and cab parts. We work with brands such as Granit, Agco Parts, Bosch, Hella, Mahle, Mann-Filter, Kramp, Grammer, Cobo, Scharmüller and Walterscheid, so there is always a choice between an original part or a well-fitting alternative.

Brands
  • View more
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Manual-Automatic
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart