Menu
EUR

Tractor parts Fendt Farmer 309 (Typ 309)

Looking for parts for your Fendt Farmer 309 (Typ 309) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

820 parts found for Fendt Farmer 309 (Typ 309)
Show:
Starter motor 12 V, 2,7 kW, 9 teeth clockwise, Ø 89 mm
19%
Starter motor 12 V, 2,7 kW, 9 teeth clockwise, Ø 89 mm
To fit as: Fendt, Renault, Steyr
€475,80 €393,22 €385,40 €318,51
 
GRANIT Hydraulic coupling sleeve KM 15L M22 x 1,5, DN 12, BG 3
2%
GRANIT
Hydraulic coupling sleeve KM 15L M22 x 1,5, DN 12, BG 3
Plug-in coupling sleeve
€14,00 €11,57 €13,72 €11,34
 
MANN-FILTER Air filter C17225/3
37%
MANN-FILTER
Air filter C17225/3
Suitable secondary element 565CF800
€64,94 €53,67 €41,15 €34,01
 
GRANIT Strainer with bolt for feed pump
16%
GRANIT
Strainer with bolt for feed pump
To fit as: Pierburg and Imsa.
€15,19 €12,55 €12,70 €10,50
 
GRANIT Mirror and left 375 x 183 x 26 mm, rod Ø 14 - 20 mm Fendt
2%
GRANIT
Mirror and left 375 x 183 x 26 mm, rod Ø 14 - 20 mm Fendt
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 270P, 275S,...
€51,79 €42,80 €50,75 €41,94
 
GRANIT Coupling pin curved Ø 31 mm, 150 mm, 480 mm
2%
GRANIT
Coupling pin curved Ø 31 mm, 150 mm, 480 mm
€36,60 €30,25 €35,87 €29,64
 
Walterscheid Flange hitch automatic 37 mm, 140 x 80 mm, M17, 2700 kg, 82,4 kN
15%
Walterscheid
Flange hitch automatic 37 mm, 140 x 80 mm, M17, 2700 kg, 82,4 kN
Automatic version
€1.355,20 €1.120,00 €1.151,92 €952,00
 
GRANIT Steering wheel Ø 425 mm fine spline, tulip shape Fendt F 12 - F 237
5%
GRANIT
Steering wheel Ø 425 mm fine spline, tulip shape Fendt F 12 - F 237
To fit as: Fendt F 12, F 15, F 20, F 25, F 28, F 24, F 17, F 237, Fix, Farmer, F...
€152,94 €126,40 €145,29 €120,07
 
ZF O-ring Ø 52 x 3 mm, inner-Ø 46 mm ZF front axle 4472064008
ZF
O-ring Ø 52 x 3 mm, inner-Ø 46 mm ZF front axle 4472064008
Außen-Ø (mm): 52 Stärke: 3 Innen-Ø: 46 | Reference no.: 0634.313.473
€83,83 €69,28
 
Bosch/Rexroth Hydraulic pump 16 cm³, taper 1:5 Ø 17 x 17, left, Fendt
Bosch/Rexroth
Hydraulic pump 16 cm³, taper 1:5 Ø 17 x 17, left, Fendt
Output volume (cc/rev): 16 | Drive shaft: Taper 1:5, Ø 17 x 17 | Bosch no.: 1517...
€748,04 €618,21
 
Bosch/Rexroth Hydraulic pump 14 cm³, claw Ø 17,8 x 8, left, Fendt Farmer 303 - 312
Bosch/Rexroth
Hydraulic pump 14 cm³, claw Ø 17,8 x 8, left, Fendt Farmer 303 - 312
Output volume (cc/rev): 14 | Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 15172225...
€662,90 €547,85
 
Wabco Pressure regulator with tire inflation connection 8,1 bar, M22 x 1,5
Wabco
Pressure regulator with tire inflation connection 8,1 bar, M22 x 1,5
Control range: 0,6 + 0,4 bar | Operating pressure max. (bar): 25 | Temperature r...
€261,83 €216,39
 
GRANIT Clutch hose DOT4, 233 mm Fendt Farmer 303 - 309, Favorit 611 - 615
GRANIT
Clutch hose DOT4, 233 mm Fendt Farmer 303 - 309, Favorit 611 - 615
Medium: DOT4 | Length (mm): 233
€104,49 €86,36
 
GRANIT Master cylinder clutch Ø 20,64 mm gray cast iron Fendt Farmer 304-412
GRANIT
Master cylinder clutch Ø 20,64 mm gray cast iron Fendt Farmer 304-412
Material: Grey cast iron | Hole Ø (mm): 20.64
€226,77 €187,41
 
GRANIT Front grille hood Fendt Farmer 304 - 312, Favorit 509 - 515
17%
GRANIT
Front grille hood Fendt Farmer 304 - 312, Favorit 509 - 515
€118,36 €97,82 €97,92 €80,93
 
HELLA Socket beacon Fendt Farmer 240 S - 310
HELLA
Socket beacon Fendt Farmer 240 S - 310
€15,40 €12,73
 
GRANIT Clutch plate 320 B, 26 x 32 mm, 10 splines Fendt
GRANIT
Clutch plate 320 B, 26 x 32 mm, 10 splines Fendt
Additional information: Made in Germany | Dimensions (mm): 26 x 32, 10 grooves
€249,38 €206,10
 
BOSCH Starter motor 12 V, 2,4 kW, 9 teeth, mounting Ø 89 mm, clockwise
5%
BOSCH
Starter motor 12 V, 2,4 kW, 9 teeth, mounting Ø 89 mm, clockwise
€572,23 €472,92 €543,96 €449,55
 
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 89 mm, clockwise
27%
HELLA
Starter motor 12 V, 3,0 kW, 9 teeth, Ø 89 mm, clockwise
€637,42 €526,79 €468,36 €387,07
 
ZF Screening plate ZF front axle 4475006011
2%
ZF
Screening plate ZF front axle 4475006011
€40,40 €33,39 €39,59 €32,72
 
ZF O-ring center flange inner-Ø 156 mm, outer-Ø 162 mm ZF front axle
2%
ZF
O-ring center flange inner-Ø 156 mm, outer-Ø 162 mm ZF front axle
€14,63 €12,09 €14,34 €11,85
 
Showing 193 - 216 of 820

Fendt Farmer 309 (Typ 309) specs

Introduced in 1993 as part of Fendt's updated Farmer 300 series, the 309 (Typ 309) was built through to 2000. The Typ 309 designation separates it from the older 309 LSA (Typ 186), which stayed in production alongside it for a period. Four-wheel drive was the only available configuration. Compared to its predecessor, the tractor came with a redesigned cab offering a lower interior noise level of 72 dB, improved ventilation, and easier access. A higher injection pressure brought fuel consumption down by around 3%, and the oil change interval was set at 500 operating hours.

Engine

Power comes from an MWM TD 226 B-4, a water-cooled four-cylinder four-stroke turbocharged diesel with direct injection. Displacement is 4,155 cc, with a bore of 105 mm and a stroke of 120 mm. Output is 95 hp (70.8 kW) at 2,350 rpm, with a maximum torque of 375 Nm at 1,500 rpm. Fuel tank capacity is 107 litres.

Engine specs:

  • Type: MWM TD 226 B-4, water-cooled, four-stroke, four-cylinder turbodiesel, direct injection
  • Displacement: 4,155 cc
  • Bore x stroke: 105 x 120 mm
  • Power: 95 hp / 70.8 kW at 2,350 rpm
  • Max. torque: 375 Nm at 1,500 rpm
  • Fuel tank: 107 litres
  • Starter: electric, 12 V

Transmission and drivetrain

The standard gearbox is a fully synchronized 21/21 unit with electro-hydraulic reverser (EHS). A 21/6 version was available as an option, as was a super-creeper gearbox. Top speed is 40 km/h. The front and rear differential locks are both electro-hydraulically operated.

Hydraulics and three-point linkage

Hydraulic pump output is 74.9 litres per minute. Rear lift capacity at the three-point hitch is 4,957 kg. Standard equipment includes one single-acting and one double-acting control valve. A front hydraulic system was available as an option.

PTO

The rear PTO is independent and electro-hydraulically engaged, running at 540, 750, or 1,000 rpm. An optional front PTO at 1,000 rpm was also available, independent and electro-hydraulically operated.

Dimensions, weight and tyres

  • Length: 4,030 mm
  • Width: 2,140 mm
  • Height (with cab): 2,660 mm
  • Wheelbase: 2,260 mm
  • Front tread: 1,690 mm
  • Rear tread: 1,660 mm
  • Operating weight: 4,350 kg
  • Maximum permissible weight: 7,500 kg

Standard front tyres are 380/70 R24, rear 480/70 R34. A wide range of optional tyre sizes was available, including 420/70 R24 front with 520/70 R34 or 480/70 R38 rear.

Electrical system

  • System voltage: 12 V
  • Battery: 110 Ah
  • Alternator: 95 A
  • Starter: electric, 12 V

Cab

The 309 (Typ 309) came standard with an air-conditioned cab. Interior noise level was 72 dB. Optional extras included a front loader, front hydraulics, air brake system, additional control valves, and extra lighting.

Parts and brands for the Fendt Farmer 309 (Typ 309)

We stock a wide range of parts for the Fendt Farmer 309 (Typ 309), covering engine components, gasket sets, cooling and fuel system parts, hydraulics, brakes, cab parts, mudguards, and electrical components. Brands in our range include Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter, and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart