Web Analytics
Fendt Farmer 412 (Typ 412) tractor parts & specs - Techniek Totaal
Menu
EUR

Tractor parts Fendt Farmer 412 (Typ 412)

Looking for parts for your Fendt Farmer 412 (Typ 412) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

437 Products
Show:
HELLA Work light
HELLA
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing: 160 mm. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 182 x 1... More
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing...
€78,53 €64,90 €74,69 €61,73
You save 5%
HELLA Work light
HELLA
Bulb: H3. Connection: Open cable ends. Width: 112 mm. Form: Square. Height: 97 mm. Length: 102 mm. Material: Housing: plastic, diffusing lens: glass. ... More
Bulb: H3. Connection: Open cable ends. Width: 112 mm. Form: Square. He...
€44,69 €36,93
GRANIT Relay Working current (make contact)
GRANIT
Version: 12 V / 30 A For fine stage switching, start interlock, cold start system, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A For fine stage switching, start interlock, cold s...
€17,19 €14,21
GRANIT Axial joint 224 mm - Ø 56 mm - M24 x 1.5 / M26 x 1.5
€87,42 €72,25 €83,09 €68,67
You save 5%
MANN-FILTER Oil filter H724/3
€123,90 €102,40 €73,19 €60,49
You save 41%
Showing 433 - 437 of 437

Fendt Farmer 412 (Typ 412) specifications

The Fendt Farmer 412 Vario (Typ 412) is part of the Farmer 400 Vario series and was built from 2001 to 2006. The tractor comes standard with four-wheel drive and a cab with heating, with air conditioning available as an option. In 2003 the engine was revised, resulting in a slight power increase. The 412 sits between the Farmer 411 Vario in the lineup and was later succeeded by the Fendt 412 Vario from the regular 400 Vario series from 2006 onwards.

Engine

The Fendt Farmer 412 Vario is powered by a Deutz four-cylinder turbodiesel with intercooler and liquid cooling. The engine has 16 valves and direct injection. The specs:

  • Displacement: 3.8 L (231.9 cu in)
  • Bore x stroke: 98 x 126 mm
  • Power: 120 hp / 89.5 kW
  • Torque: 540.1 Nm at 1,450 rpm
  • Rated RPM: 2,100
  • Compression ratio: 18:1
  • Starter voltage: 12V
  • Battery: 12V / 90 Ah
  • Alternator: 143 A
  • Fuel tank: 165 L

Transmission

The Farmer 412 Vario uses the stepless Fendt Vario transmission type ML 90. Field speeds go up to 24 km/h forward and 17 km/h reverse, with road speeds up to 50 km/h forward and 40 km/h reverse. Brakes are hydraulically operated wet disc brakes and steering is power-assisted.

Dimensions and weight

  • Wheelbase: 241 cm
  • Overall length: 419 cm
  • Width: 245 cm
  • Cab height: 287 cm
  • Front tread: 182 cm
  • Rear tread: 180 cm
  • Ground clearance: 53 cm
  • Unladen weight: 5,239 kg
  • Max. permissible weight: 7,500 kg

Hydraulics, PTO and tyres

The hydraulic pump delivers 74.9 litres per minute via a load sensing system. The rear hitch has a lift capacity of 6,569 kg (category III). A front linkage was available as an option. The rear PTO is independent and runs at 540, 750 or 1,000 rpm (at 1,932 and 1,937 engine rpm respectively). A front PTO at 540 or 1,000 rpm was optionally available. Standard tyres are 540/65R24 front and 600/65R38 rear.

Parts for the Fendt Farmer 412 (Typ 412)

We stock a wide range of parts for the Fendt Farmer 412 Vario, covering engine components, filters, cooling, hydraulics, brakes, exhaust systems, bodywork and electrics. Parts are sourced from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Mahle, Mann-Filter, Walterscheid, Grammer, Cobo and Scharmüller.

Brands
  • View more
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Manual-Automatic
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart