Web Analytics
Fendt Favorit 509 (Typ 509) tractor parts & specs
Menu
EUR

Tractor parts Fendt Favorit 509 (Typ 509)

Looking for parts for your Fendt Favorit 509 (Typ 509) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

527 Products
Show:
GRANIT Starter 12 V / 2.7 kW - Nominal voltage: 12 V, Nominal power: 2,7 kW, No. of pinion teeth: 9
5%
GRANIT
Starter 12 V / 2.7 kW - Nominal voltage: 12 V, Nominal power: 2,7 kW, No. of pinion teeth: 9
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Hol...
€259,27 €214,27 €246,31 €203,56
 
GRANIT Repair set footbrake
2%
GRANIT
Repair set footbrake
To fit as: Fendt Farmer 240S, 250S, 250V, 260S, 260P, 260V, 270P, 270V, 275V, 27...
€70,96 €58,64 €69,54 €57,47
 
GRANIT Tension spring Brake shoe Deutz 3006, 4006, 5206, 6206
2%
GRANIT
Tension spring Brake shoe Deutz 3006, 4006, 5206, 6206
To fit as: Deutz 3006, 4006, 5206, 6206
€3,84 €3,17 €3,76 €3,11
 
GRANIT Cap for connector head
2%
GRANIT
Cap for connector head
Version: Yellow.
€13,08 €10,81 €12,82 €10,60
 
GRANIT Brake line brake master cylinder
2%
GRANIT
Brake line brake master cylinder
€11,01 €9,10 €10,79 €8,92
 
GRANIT Compression spring for hand brake lever
2%
GRANIT
Compression spring for hand brake lever
€1,73 €1,43 €1,70 €1,41
 
GRANIT Pulley at compressor
GRANIT
Pulley at compressor
€233,54 €193,01
 
GRANIT Rubber elbow from engine to heater valve
2%
GRANIT
Rubber elbow from engine to heater valve
€22,12 €18,28 €21,68 €17,92
 
GRANIT Rubber elbow return, heater matrix
2%
GRANIT
Rubber elbow return, heater matrix
€33,46 €27,65 €32,79 €27,10
 
GRANIT Radiator hose for cylinder head and air compressor
2%
GRANIT
Radiator hose for cylinder head and air compressor
Inner Ø: 22 mm. Length: 1000 mm.
€42,07 €34,77 €41,23 €34,07
 
GRANIT V-belt
2%
GRANIT
V-belt
€18,60 €15,37 €18,23 €15,07
 
Optibelt V-belt set set = 2 pcs.
2%
Optibelt
V-belt set set = 2 pcs.
€64,98 €53,70 €63,68 €52,63
 
GRANIT Gasket for crankshaft cover rear
2%
GRANIT
Gasket for crankshaft cover rear
€29,28 €24,20 €28,69 €23,71
 
GRANIT Connecting rod bush 35 mm
2%
GRANIT
Connecting rod bush 35 mm
Dimensions: 35 mm.
€19,82 €16,38 €19,42 €16,05
 
GRANIT Gasket for exhaust and intake manifold
2%
GRANIT
Gasket for exhaust and intake manifold
€5,66 €4,68 €5,55 €4,59
 
GRANIT Crankshaft seal front, Ø 78 x 100 x 13 mm
2%
GRANIT
Crankshaft seal front, Ø 78 x 100 x 13 mm
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595.
€23,40 €19,34 €22,93 €18,95
 
GRANIT Gasket
2%
GRANIT
Gasket
€15,09 €12,47 €14,79 €12,22
 
GRANIT Sealing ring for oil cooler
2%
GRANIT
Sealing ring for oil cooler
€14,40 €11,90 €14,11 €11,66
 
GRANIT Valve cover
2%
GRANIT
Valve cover
€53,76 €44,43 €52,68 €43,54
 
GRANIT Rubber bush
2%
GRANIT
Rubber bush
Description: Rubber mount for fuel tank.
€33,77 €27,91 €33,09 €27,35
 
GRANIT Bolt set
2%
GRANIT
Bolt set
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€11,52 €9,52 €11,29 €9,33
 
GRANIT Gasket
2%
GRANIT
Gasket
€3,09 €2,55 €3,03 €2,50
 
GRANIT Locking pin
2%
GRANIT
Locking pin
€15,95 €13,18 €15,63 €12,92
 
GRANIT Support for hinge attachment, rear screen
2%
GRANIT
Support for hinge attachment, rear screen
€4,50 €3,72 €4,41 €3,64
 
Showing 481 - 504 of 527

Fendt Favorit 509 (Typ 509) specs

The Fendt Favorit 509 C is the entry-level model of the Favorit 500C series, which Fendt introduced in the autumn of 1993. The names Favorit 509 (Typ 509) and Favorit 509C (Typ 509) refer to the same model. The tractor was built from 1994 to 2000, with a total of 1,490 units produced during that period. Despite being the smallest model in the series, its technical specification closely matched that of the much heavier Fendt 800 series. The 509 C was designed as a versatile tractor suitable for ploughing, harvesting, loading and transport work.

Engine and power

Under the hood sits an MWM four-cylinder turbodiesel, type TD 226 B-4, with a displacement of 4,156 cc. Engine output is 95 hp (70.8 kW) at 2,100 rpm. Maximum torque is 381 Nm at 1,500 rpm. Fuel delivery is handled by a Bosch VE distributor pump with automatic advance and multi-hole injectors. Maximum injection pressure is 850 bar. Further features include overhead valves, pressure lubrication, piston crown cooling and a gear-driven camshaft. Cooling is handled by a thermostatically controlled dual-circuit system with a viscous fan coupling and exhaust turbocharger. The constant power range runs between 1,900 and 2,400 rpm, and an oil change is only required after 500 operating hours. The fuel tank holds 135 litres.

Transmission

The 509 C uses a ZF 7200 Turboshift gearbox, a fully synchronised unit with four-speed powershift and electro-hydraulic reverser operated by a single lever. The gearbox offers 44 forward and 44 reverse gears, consisting of 24 working gears and 20 creep gears. A notable feature is the Voith fluid coupling (type 390 TD-F), positioned ahead of the wet multi-disc clutch. This hydraulic coupling smooths out power delivery and protects the drivetrain from shock loads. Direction changes can be made without depressing the clutch, thanks to the synchronised reverser with preselect function. Standard top speed is 40 km/h, with an optional increase to 50 km/h.

Hydraulics and PTO

  • Hydraulic pump: closed system with a flow rate of 101.8 litres per minute
  • Rear three-point hitch lift capacity: 5,508 kg (category II/III)
  • Control: lower-link draft sensing
  • Rear PTO: independent, electro-hydraulic, 540/750/1000/1400 rpm
  • Front PTO: independent, optional, 1000 rpm
  • Front and rear differential lock: electro-hydraulic

Dimensions, weight and tyres

The operating weight of the tractor is 4,970 kg. Wheelbase is 233 cm. Standard tyre sizes are 420/70R24 front and 480/70R38 rear, though 18.4 R38 rear was also used. The electrical system runs on 12 volts with a 110 Ah battery and alternator charging.

Cab

The cab of the 509 C was at launch nearly identical to that of the Farmer 300 series, with a noise level of 72 dB(A). In 1995 the cab comfort was upgraded. Heating was standard, air conditioning was optional. The cab was fitted with a sprung suspension mounting.

Parts and brands for the Fendt Favorit 509 C

We supply parts for the Fendt Favorit 509 C, for both routine maintenance and full restoration. This covers engine parts, cooling components, exhaust systems, fuel filters, hydraulic components, brakes, electrics and cab parts. The parts we supply come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart