Menu
EUR

Tractor parts Fendt Favorit 614 (Typ 384)

Looking for parts for your Fendt Favorit 614 (Typ 384) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

498 parts found for Fendt Favorit 614 (Typ 384)
Show:
Wabco Overflow valve 6 bar, M22 x 1,5 Fendt Farmer, Favorit
Wabco
Connection: M22 x 1.5 | Working pressure (bar): 13 | Overflow pressure (bar): 6 More
Connection: M22 x 1.5 | Working pressure (bar): 13 | Overflow pressure...
€145,95 €120,62
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
Wabco
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylinder capacity (cm³): 159 | Coolant: Luft | Type: 1 - cylinder | Lubrication syst... More
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylin...
€2.359,27 €1.949,81
GRANIT Repair set clutch cylinder with piston Fendt
GRANIT
Additional information: with piston More
Additional information: with piston
€81,21 €67,12
GRANIT Clutch slave cylinder Ø 38,1 mm, DOT 4 Fendt Favorit 611 - 615
GRANIT
Hole Ø (mm): 38.1 | Menke no.: 73708 More
Hole Ø (mm): 38.1 | Menke no.: 73708
€121,72 €100,60
GRANIT Repair set clutch cylinder with piston Fendt Favorit 600 - 615
GRANIT
Additional information: with piston | Menke no.: 209836 More
Additional information: with piston | Menke no.: 209836
€68,07 €56,26
GRANIT Clutch hose DOT4, 233 mm Fendt Farmer 303 - 309, Favorit 611 - 615
GRANIT
Medium: DOT4 | Length (mm): 233 More
Medium: DOT4 | Length (mm): 233
€104,49 €86,36
GRANIT Clutch plate 360 ZCE 41 x 45, 22 splines sintered Fendt
GRANIT
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 41 x 45, 22 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€620,42 €512,74
GRANIT Clutch plate 350 41 x 45, 22 splines Fendt Favorit 611 - 615
GRANIT
Dimensions (mm): 41 x 45, 22 grooves | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 22 grooves | Additional information: Made in...
€387,99 €320,65
Elring Valve cover gasket MWM D226 Fendt Farmer 102 - Favorit 615
€4,69 €3,88 €4,59 €3,79
You save 2%
GRANIT Brake pad set drive shaft 98 x 15 x 68 mm Fendt
€29,08 €24,03 €28,50 €23,55
You save 2%
GRANIT Safety eyelet brake lining foot brake Fendt Favorit 600-615
€2,60 €2,15 €2,55 €2,11
You save 2%
GRANIT Pad retaining pin Fendt Favorit 611-615
€14,63 €12,09 €14,34 €11,85
You save 2%
GRANIT Dust cap wheel brake cylinder DOT4 Fendt
GRANIT
Medium: DOT4. More
Medium: DOT4.
€2,98 €2,46 €2,92 €2,41
You save 2%
GRANIT U-gaiter brake cylinder DOT4 Fendt Favorit 600-615
€8,66 €7,16 €8,49 €7,02
You save 2%
GRANIT Rubber plug brake cylinder DOT4 Fendt Farmer 240-307
€5,12 €4,23 €5,02 €4,15
You save 2%
GRANIT Gaiter hand brake lever Fendt
€75,87 €62,70 €74,35 €61,45
You save 2%
GRANIT Compression spring hand brake lever Fendt
€1,75 €1,45 €1,70 €1,41
You save 3%
GRANIT Repair set foot brake Fendt
€37,20 €30,74 €36,46 €30,13
You save 2%
GRANIT Sealing ring 58 x 80 x 10/12 mm Fendt Favorit 611-615
GRANIT
Version: 58 x 80 x 10 / 12 mm. More
Version: 58 x 80 x 10 / 12 mm.
€64,63 €53,41 €63,34 €52,35
You save 2%
GRANIT PTO shaft end piece 1 3/8 inch, 6 splines, 135 mm Fendt
GRANIT
Version: Length 135 mm, 1 3/8", 6 grooves. More
Version: Length 135 mm, 1 3/8", 6 grooves.
€773,61 €639,35 €657,57 €543,45
You save 15%
GRANIT Compression spring shifting 19,5 mm, Ø 10,5 mm, wire thickness 1,5 mm Fendt
GRANIT
Dimensions: Length 19,5, Ø 10,5, Wire thickness 1,5. More
Dimensions: Length 19,5, Ø 10,5, Wire thickness 1,5.
€4,02 €3,32 €3,94 €3,26
You save 2%
GRANIT Seal gear lever 0,3 mm Fendt
GRANIT
Thickness: 0,3 mm. More
Thickness: 0,3 mm.
€5,51 €4,55 €5,40 €4,46
You save 2%
Showing 289 - 312 of 498

Fendt Favorit 614 (Typ 384) specifications

The Fendt Favorit 614 LSA is the four-wheel drive version from the Favorit 600 series and carries the internal type designation T 384. The tractor was produced from 1983 to 1993 and went through two clearly distinct production phases during that period, each with its own technical designation and engine output. The LS variant with rear-wheel drive falls under type FWA 284. The 614 LSA was the model that remained in production for the longest period within the LS line of the 600 series.

Transmission and travel speed

The Favorit 614 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox, type T 3550, with side-mounted gear selection. The main gearbox has four pre-selectable speed ranges. In the 40 km/h version, the ranges are divided as follows: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h. In the 30 km/h version, the six forward gears run from 2.47 to 24.48 km/h; in the 40 km/h version from 3.07 to 30.36 km/h. From 1987 onwards, the Duospeed gearbox was available alongside the conventional transmission, enabling a continuously variable drive range up to 20 km/h. There was also an extremely rare 50 km/h version, although approximately 45 km/h was achieved in practice.

Engine

The Favorit 614 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. Further engine features include Rotocap valves, individually mounted cylinder heads, piston crown cooling, ring carrier pistons, a dry air filter with pre-cleaner, an inline injection pump with governor and thermostatically controlled dual-circuit cooling. The crankshaft runs on seven bearings.

Displacement is 6,234 cc. Power output varies depending on the production phase. In the first phase (T 384.210, 1983 to 1987, 649 units), the engine produces 155 hp, with a maximum torque of 522 Nm at 1,500 rpm. In the second phase (T 384.211, 1988 to 1993, 922 units), output was increased to 165 hp, with a maximum torque of 631 Nm at 1,500 rpm.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO with power-shift drive at 1,000 rpm is available.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute (46 plus 26 litres) at a working pressure of 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available, with a maximum lift capacity of 3,490 kg. The lift system features Fendt-Tronic for delay-free activation of the control impulse, draft, position and continuously variable mixed control, rapid raise, transport lock, lowering restrictor, lift height limiter and depth control.

Brakes and steering

The braking system consists of hydraulically operated internal shoe brakes acting on the rear wheels, usable as individual wheel brakes. Steering is hydrostatically assisted.

Weight and dimensions

  • Permissible gross weight: 7,500 kg (optional 8,500 kg)
  • Wheelbase: 272 cm
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 227 g/kWh

Standard tyre sizes are 16.9-26 at the front and 20.8R38 at the rear. The unladen weight of the 614 LS is approximately 6,140 kg.

Cab

The cab is a rubber-mounted, sound and vibration-isolated safety cab with fold-open front and rear windows, tinted glass, windscreen washer system, sun visor, two-stage hot water heating, three-stage ventilation system, coat hooks, two work lights, radio preparation, roof hatch, air-suspended seat, digital tractor meter, height-adjustable steering wheel and interior lighting.

Difference from the LS and the earlier SL

A question that frequently comes up with the 614 is the difference between it and the LS and the earlier SL version. The Favorit 614 SL (type FWA 284) is the late 1970s version with rear-wheel drive. The 614 LSA (type 384) combines four-wheel drive with the revised LS cab and hydraulics. Engine-wise the two are closely related, but the LSA received a substantial power increase in its second phase, rising from 155 to 165 hp, along with higher torque figures.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart