Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

489 parts found for Fendt Favorit 615 (Typ 385)
Show:
GRANIT Reflector round yellow, Ø 61 mm, bore Ø 5,2 mm
GRANIT
Colour: Yellow | Hole Ø (mm): 5.2 | Total Ø (mm): 61 More
Colour: Yellow | Hole Ø (mm): 5.2 | Total Ø (mm): 61
€1,57 €1,30 €1,54 €1,27
You save 2%
SACEX Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
SACEX
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 128 mm. Total height: 204 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€40,90 €33,80 €40,08 €33,12
You save 2%
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 154 x 128 x 77 mm
HELLA
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 154 x 128 x 77 mm. Installation location: Universal. Prote... More
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. ...
€42,96 €35,50 €42,10 €34,79
You save 2%
GRANIT Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
GRANIT
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm. Material: Plastic. More
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole...
€5,30 €4,38 €5,19 €4,29
You save 2%
GRANIT Tail light holder
€75,13 €62,09 €73,63 €60,85
You save 2%
GRANIT Pipe RKLE
€97,77 €80,80 €95,81 €79,18
You save 2%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€36,91 €30,50 €36,17 €29,89
You save 2%
GRANIT Cover
€55,54 €45,90 €54,43 €44,98
You save 2%
HELLA Work lamp flood beam H3, 12 / 24 V, 35 / 70 W, square, mounting, bolted
HELLA
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: • Housing: plastic • Diffusing lens: glass. Dimensions W x H x D: 154 x 94 x 11... More
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: •...
€54,33 €44,90 €53,24 €44,00
You save 2%
Cobo Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
Cobo
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Nominal voltage: 12 V. Power consumption: 55 W. Mounting size: 117 mm. Bulbs incl... More
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. N...
€94,68 €78,25 €92,79 €76,69
You save 2%
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€8,53 €7,05 €8,36 €6,91
You save 2%
HELLA Glass rear light right, 3 light functions, lamp P21W, R10W
HELLA
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850V, 1140F, 1640F, 1840F, 1850F, 1950F, 2250F, 2650F, 1550, 1640, 1750, 1840, 1850... More
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850...
€19,63 €16,22 €16,61 €13,73
You save 15%
GRANIT Seal feed pump
GRANIT
To fit as: Deutz DX 140, 145, 160 More
To fit as: Deutz DX 140, 145, 160
€2,42 €2,00
Set of parts filter glass Ø 29/35 x 53 mm
Ø: 29/35 mm. Height: 33 mm. More
Ø: 29/35 mm. Height: 33 mm.
€10,38 €8,58 €6,98 €5,77
You save 33%
Stabilus Windshield frame shock absorber 250 N, 600,5 mm, stroke 252,5 mm Fendt
Stabilus
To fit as: Fendt Windscreen More
To fit as: Fendt Windscreen
€40,92 €33,82 €40,10 €33,14
You save 2%
GRANIT Top link ball cat. 3 Ø 59 mm Fendt
GRANIT
Tractor types: Fendt Farmer 409, 410, 411, 412. Fendt Farmer 600, 610, 612, 614, 615, 711, 712, 714, 716, 816, 818, 822, 824, 916, 920, 924, 926. Fend... More
Tractor types: Fendt Farmer 409, 410, 411, 412. Fendt Farmer 600, 610,...
€33,48 €27,67 €32,81 €27,12
You save 2%
GRANIT Thrust bearing 60 x 104 x 93 mm Fendt Favorit 611 - 615
GRANIT
Dimensions (mm): 60 x 104 x 93 More
Dimensions (mm): 60 x 104 x 93
€411,41 €340,01
GRANIT Starter motor 12 V, 3,1 kW, 9 teeth, 272 mm
€274,73 €227,05 €229,82 €189,93
You save 16%
Wabco Cover antifreeze pump Fendt, Massey Ferguson, Case IH
€62,07 €51,30 €60,83 €50,27
You save 2%
Wabco Compressor 10 bar, 159 cm³, Ø 75 mm, stroke 36 mm, M18 x 1,5 Fendt
Wabco
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.600,46 €2.149,14
Wabco Compressor 10 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 28,5 mm
Wabco
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.578,76 €2.131,21
GRANIT Brake shoe Hand brake 250 x 30 mm Fendt Favorit 600-615
€96,98 €80,15 €95,04 €78,55
You save 2%
GRANIT Grooved ring brake cylinder Fendt Farmer 310, 311, Favorit 600-615, GT 380
€22,74 €18,79 €22,29 €18,42
You save 2%
Showing 313 - 336 of 489

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart