Web Analytics
Fendt Favorit 615 (Typ 385) tractor parts & specs
Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

395 Products
Show:
Washer
Washer
€1,36 €1,12
 
Gasket For oil return line
5%
Gasket For oil return line
€4,09 €3,38 €3,89 €3,21
 
Stop cable
7%
Stop cable
A: 1485 mm. B: 1035 mm.
€180,53 €149,20 €167,89 €138,75
 
Gasket for oil filter head
5%
Gasket for oil filter head
€6,17 €5,10 €5,86 €4,84
 
Clamp half for MWM engine
5%
Clamp half for MWM engine
€5,55 €4,59 €5,27 €4,36
 
Set of parts
5%
Set of parts
Dimensions: Ø 29/35 mm. Height: 53 mm.
€10,01 €8,27 €9,51 €7,86
 
Hinge part for door, except for: Favorit 610
5%
Hinge part for door, except for: Favorit 610
€11,50 €9,50 €10,93 €9,03
 
Bearing for window opener (side window right/left)
5%
Bearing for window opener (side window right/left)
€12,39 €10,24 €11,77 €9,73
 
Locking claw rear screen
5%
Locking claw rear screen
€28,21 €23,31 €26,80 €22,15
 
Guide ring
5%
Guide ring
€14,98 €12,38 €14,23 €11,76
 
Spindle for lifting strut
7%
Spindle for lifting strut
Dimensions: Length = 300, Thread = M28 x 2 mm.
€160,40 €132,56 €149,17 €123,28
 
Guide bar for lifting strut
5%
Guide bar for lifting strut
€16,86 €13,93 €16,02 €13,24
 
Gas strut
5%
Gas strut
suitable for: Tür. Newtons: 100. A: 500 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form:...
€24,62 €20,35 €23,39 €19,33
 
Pin for top link
5%
Pin for top link
Dimensions: 25.4 x 140 mm.
€45,18 €37,34 €42,92 €35,47
 
ROCKINGER Inner part
15%
ROCKINGER
Inner part
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.213,79 €1.003,13 €1.031,72 €852,66
 
Detent bearing
5%
Detent bearing
€19,90 €16,45 €18,91 €15,63
 
Potentiometer Rotary function
Potentiometer Rotary function
Version: For control unit - hydraulics. Menke no.: 209776.
€148,49 €122,72
 
Brake light switch Mechanical
5%
Brake light switch Mechanical
Version: Break contact, normally on.
€87,83 €72,59 €83,44 €68,96
 
Start switch 12 V/24 V
5%
Start switch 12 V/24 V
Version: • With 2 moulded reversible safety keys made of nickel silver, • For ce...
€51,04 €42,18 €48,49 €40,07
 
HELLA Rocker switch (Combination switch) locking
5%
HELLA
Rocker switch (Combination switch) locking
Version: Without light, 3 blade terminals 6.3 mm, 3 switch positions 0: off, 1 a...
€17,48 €14,45 €16,62 €13,74
 
Push button switch Blower
5%
Push button switch Blower
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€43,89 €36,27 €41,70 €34,46
 
HELLA Reflectors - Colour: Yellow, Total Ø: 60 mm
15%
HELLA
Reflectors - Colour: Yellow, Total Ø: 60 mm
Colour: Yellow | Total Ø (mm): 60 | Additional information: 22 cm² effective ref...
€2,25 €1,86 €1,91 €1,58
 
Work light
5%
Work light
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€52,85 €43,68 €50,21 €41,50
 
HELLA Work light
5%
HELLA
Work light
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€42,96 €35,50 €40,84 €33,75
 
Showing 337 - 360 of 395

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Locking pin Ø
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart