Menu
EUR

Ford 5640 tractor parts & technical data

Working on a Ford 5640? This page has more than 160 matching parts for this 40 series tractor, with electrics, lighting and trailer couplings up front.

165 parts found for Ford 5640
Show:
MANN-FILTER Hydraulics- / getriebeöl filters WH980/3, HF6553
€66,60 €55,04 €39,88 €32,96
You save 40%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 92 mm
€527,52 €435,97 €406,44 €335,90
You save 23%
AKS-Dasis Thermostat airco Case IH, Fiat, Ford, New Holland
AKS-Dasis
Version: Air conditioning system More
Version: Air conditioning system
€142,98 €118,17 €131,54 €108,71
You save 8%
Fuel filter / diesel filters complete
€53,18 €43,95 €48,93 €40,43
You save 8%
Eaton Internal plate transmission Ford, New Holland, 136 g
Eaton
Reference no.: 81805123 More
Reference no.: 81805123
€34,32 €28,36
Eaton Planetary gear transmission, 994 g
Eaton
Reference no.: 5145497 More
Reference no.: 5145497
€85,99 €71,07 €79,11 €65,38
You save 8%
HELLA Alternator 14 V, 120 A, pulley Ø 67 mm, 8 grooves
HELLA
Charging current (A): 120 | Nominal voltage (V): 14 | Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 67 | Nominal values (V / A):... More
Charging current (A): 120 | Nominal voltage (V): 14 | Additional infor...
€505,61 €417,86 €389,56 €321,95
You save 23%
LUK Single clutch 330TBFR round disc spring fingers Ford, New Holland
€349,36 €288,73 €321,41 €265,63
You save 8%
Clutch plate 330 1 3/4", 10 splines Ford 5110 - 7910
Dimensions (mm): 1 3/4"" 10 grooves | Additional information: Made in Germany More
Dimensions (mm): 1 3/4"" 10 grooves | Additional information: Made in ...
€241,54 €199,62 €222,22 €183,65
You save 8%
Thrust bearing 63,5 x 100 x 22 mm Ford, Massey Ferguson, New Holland
Dimensions (mm): 63.5 x 100 x 22 More
Dimensions (mm): 63.5 x 100 x 22
€37,69 €31,15 €34,67 €28,66
You save 8%
Elring Cylinder head gasket Ø 115 mm engine BSD442, BSD444, BSD444T
€68,17 €56,34 €62,72 €51,83
You save 8%
PTO clutch complete Ford 5000 - 7840
€765,91 €632,98 €704,64 €582,34
You save 8%
MAHLE Gear reduction starter 12 V, 3,0 kW, 10 teeth, clockwise, Ø 92 mm
€560,37 €463,12 €335,62 €277,38
You save 40%
Universal joint axle drive 27 x 71 mm, maintenance-free
€80,05 €66,16 €73,65 €60,86
You save 8%
Sauermann Drawbar reinforced 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€1.184,83 €979,20 €1.090,04 €900,86
You save 8%
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€877,53 €725,23 €807,33 €667,21
You save 8%
MAHLE Alternator 14 V / 45 A, flange 80 mm, pulley-Ø 67 mm Ford 5640
MAHLE
Direction of rotation: ↻ | Pulley Ø (mm): 67,0 | Charging current (A): 45 | Nominal values (V / A): 14 / 45 | Nominal voltage (V): 14 | Mounting ho... More
Direction of rotation: ↻ | Pulley Ø (mm): 67,0 | Charging current (...
€340,20 €281,16 €203,76 €168,40
You save 40%
Air conditioning compressor 12 V, pulley Ø 119 mm, 6 grooves Ford, New Holland
Connection: PV6 | For compressor: SD7H15 | Oil quantity (ccm): 200 | Suitable oil: SP - 10 | Refrigerant: R 134a | Fixing: EM | Pulley Ø (mm): 119 | ... More
Connection: PV6 | For compressor: SD7H15 | Oil quantity (ccm): 200 | S...
€454,51 €375,63 €418,15 €345,58
You save 8%
MAHLE Alternator 14 V, 100 A, pulley-Ø 67 mm Fiat, Ford, New Holland
MAHLE
Installation angle (°): r 60 | Charging current (A): 100 | Additional information: Compact alternator, with W connection, dust-tight | Form: A | Dire... More
Installation angle (°): r 60 | Charging current (A): 100 | Additional...
€294,93 €243,74 €176,64 €145,99
You save 40%
MAHLE Alternator 14 V, 100 A, pulley-Ø 67 mm Ford, Laverda, New Holland
MAHLE
Form: A | Pulley Ø (mm): 67,0 | Additional information: Compact alternator, dust-tight | Nominal voltage (V): 14 | Pulley spacing (mm): 32,7 | Mounti... More
Form: A | Pulley Ø (mm): 67,0 | Additional information: Compact alter...
€458,64 €379,04 €274,70 €227,03
You save 40%
Eaton Input shaft transmission Ford 5110 - 8240, New Holland TS80 - TS6040
Eaton
Reference no.: E2NN7017EA More
Reference no.: E2NN7017EA
€399,50 €330,17 €367,54 €303,75
You save 8%
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
MAHLE Starter motor 12 V, 3,6 kW, 10 teeth, clockwise, mounting Ø 92,0 mm
€534,86 €442,03 €320,35 €264,75
You save 40%
Ball joint 90 mm, 7/8" x 14, 7/8" x 14, taper 27 - 32 mm
A: 90 mm. C: 7/8" x 14 mm. D: 7/8" x 14 mm. E: 27 mm. F: 32 mm. Taper: 27 - 32 mm. More
A: 90 mm. C: 7/8" x 14 mm. D: 7/8" x 14 mm. E: 27 mm. F: 32 mm. Taper:...
€120,97 €99,98 €111,29 €91,98
You save 8%
Brake mechanism Ø 222 mm, tine distance 23 mm Ford, New Holland
€115,32 €95,31 €106,09 €87,68
You save 8%
V-belt tensioner Ford, New Holland
€119,37 €98,65 €109,82 €90,76
You save 8%
Eaton Planetary gear transmission, 326 g
Eaton
Reference no.: CAR115643 More
Reference no.: CAR115643
€43,97 €36,34
Eaton Internal plate transmission Ford, New Holland, 142 g
Eaton
Reference no.: E0NN7Z031AA More
Reference no.: E0NN7Z031AA
€56,25 €46,49 €51,75 €42,77
You save 8%
Internal plate PTO clutch 2,3 mm, inner 107,4 mm, outer 148,5 mm
Version: Thickness: 2.3 mm Inner: 107.4 mm Outer: 148.5 mm 52 teeth More
Version: Thickness: 2.3 mm Inner: 107.4 mm Outer: 148.5 mm 52 teeth
€24,95 €20,62
Filter dryer 272 mm, #6 3/8 o-ring, connection thread M/F
Connection thread: M/F | Length (mm): 272 | Thread: 6 3/8 O-ring More
Connection thread: M/F | Length (mm): 272 | Thread: 6 3/8 O-ring
€65,38 €54,03 €60,15 €49,71
You save 8%
AKS-Dasis Filter dryer 381 mm, #6 3/8 inch, spring look Ford 5640 - 8340
AKS-Dasis
Connection thread: Spring look | Length (mm): 381 | Thread: 6 3/8"" | Weight (g): 400 More
Connection thread: Spring look | Length (mm): 381 | Thread: 6 3/8"" | ...
€92,07 €76,09 €84,70 €70,00
You save 8%
Expansion valve airco 10 - 14 mm Case IH, Fiat, Ford, New Holland
Equipment: O-ring | Connection thread E: 14 mm | Connection thread A: 10 mm More
Equipment: O-ring | Connection thread E: 14 mm | Connection thread A: ...
€82,40 €68,10 €75,81 €62,65
You save 8%
LUK Thrust bearing 63,5 x 100 x 22 mm Ford, Massey Ferguson, New Holland
LUK
Dimensions (mm): 63.5 x 100 x 22 More
Dimensions (mm): 63.5 x 100 x 22
€62,34 €51,52 €57,35 €47,40
You save 8%
LUK Clutch plate 1 3/4 inch, 10 splines, organic Ford, New Holland
LUK
Material specifications: Organic clutch lining | Dimensions (inches): 1 3/4"" 10 grooves More
Material specifications: Organic clutch lining | Dimensions (inches): ...
€312,34 €258,13 €287,35 €237,48
You save 8%
Lift arm 950 mm Ford 5000 - 7740, New Holland TS80 - TS110
Version: Primer finish, colour may vary More
Version: Primer finish, colour may vary
€164,90 €136,28 €151,71 €125,38
You save 8%
Eaton Shift ring 616 g Case IH, Ford, New Holland, Steyr
Eaton
Reference no.: E6NN7106AA More
Reference no.: E6NN7106AA
€119,82 €99,02 €110,23 €91,10
You save 8%
Eaton Locking switch transmission Ford, New Holland
Eaton
Reference no.: C7NN7A247A More
Reference no.: C7NN7A247A
€143,31 €118,44 €131,85 €108,96
You save 8%
Starter motor with reduction 12 V, 4,2 kW, 10 teeth, 253,5 mm, Ø 92 mm
Starter motor 12V 3,1 kW, 10 teeth clockwise, 257,5 mm
€301,49 €249,17 €277,37 €229,23
You save 8%
HELLA Starter motor 12 V, 2,8 kW, 10 teeth, Ø 92 mm, clockwise
€504,14 €416,64 €388,44 €321,02
You save 23%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5 L, 38 °
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 L mm. F: 38 °. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 L mm. F: 38 °.
€60,87 €50,31 €56,00 €46,28
You save 8%
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,61 €213,73
PTO shaft end piece 1 3/8" 6 spline, 1000 rpm Ford, Fiat
Version: 1000 rpm, 1 3/8", 6 splines. More
Version: 1000 rpm, 1 3/8", 6 splines.
€261,48 €216,10 €240,56 €198,81
You save 8%
PTO shaft end piece 1 3/8" 21 spline, 1000 rpm Ford, Fiat
Version: 1000 rpm, 1 3/8" 21 splines. More
Version: 1000 rpm, 1 3/8" 21 splines.
€221,67 €183,20 €203,94 €168,54
You save 8%
ROCKINGER Adapter plate 320 mm, hole pattern 83 x 56 / 160 x 100 mm, pin Ø 30 mm
ROCKINGER
Load capacity: 3000 kg. D-value: 100 kN. Rail width: 320 mm. Hole pattern: 83 x 56, 160 x 100 mm. Pin Ø: 30 mm. Guide width: 20 mm. Colour: Black. Ho... More
Load capacity: 3000 kg. D-value: 100 kN. Rail width: 320 mm. Hole patt...
€857,96 €709,06 €661,04 €546,32
You save 23%
Piston ring set Ø 111,76 mm, 2,38 / 2,38 / 4,76 mm
Dimensions: 3 rings, Ø 111.76 mm, 2.38 mm / 2.38 mm / 4.76 mm. More
Dimensions: 3 rings, Ø 111.76 mm, 2.38 mm / 2.38 mm / 4.76 mm.
€38,54 €31,85
Showing 1 - 48 of 165

Ford 5640 tractor parts

Does the front of your Ford 5640 wander on the road, or do you keep correcting the wheel to hold a straight line? The cause is often in the ball joints or axial joints. This page covers more than 160 parts that fit the 5640, from steering joints to starter motors, made by GRANIT and by brands such as MAHLE, Eaton, Cobo and LUK.

Steering and front axle

For the steering there are ball joints and axial joints. To find play, jack up the front axle and rock the wheel at front and rear while someone else watches the joints. Always fit a new ball joint with a new nut and split pin, seat the taper clean and dry in the arm, and tighten the nut before you fit the split pin. Have the toe-in reset afterwards, otherwise the front tyres will wear unevenly. Inner plates for the front axle are listed on this page too.

Engine, clutch and PTO

  • Starter motors and alternators for the starting and charging circuit.
  • Clutch plates, including LUK.
  • Gaskets for the exhaust and water pump, and silencers.
  • PTO shaft end pieces for the rear.
  • Tank caps for the fuel tank.

A tank cap looks like a minor part, but it can cause real trouble. If the breather is blocked, the lift pump pulls a vacuum in the tank and the engine dies under heavy load. If the seal is worn, dirt and water find their way into the diesel. Either way, a new cap sorts it out quickly.

Cab, lights and drawbar

For the cab and bodywork there are rear window gas struts, mirrors, indicator and position lights, and hand brake cables. At the rear you will find drawbars. A hand brake cable that has gone stiff is best replaced straight away rather than freed off with penetrating oil, so the brake still holds on a slope.

Getting the fit right

The type plate on the 5640 and the reference number on the old part are your best guide. With ball joints, also check the thread direction and the taper, because left and right joints look very much alike. Ford placed the 5640 in its 40 series. The Ford 8240 from the same series has its own page with the parts that fit that model, which is useful if you look after both tractors. Looking after a different Ford tractor? Start from Ford parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart