Menu
EUR

Ford 6810 tractor parts & technical data

Replacing lights or repairing the electrics on your Ford 6810? With more than 190 parts for this model, trailer couplings included, the right part is here.

193 parts found for Ford 6810
Show:
LED main headlight round 133 x 166 x 84 mm, H4, 12/24 V
Protection class: IP69K | Connection: H4 | EMC: CISPR 25 class 3 | Test mark: ECE R148, ECE R149 | Light function: Dipped beam, full beam, side light,... More
Protection class: IP69K | Connection: H4 | EMC: CISPR 25 class 3 | Tes...
€107,85 €89,13 €102,45 €84,67
You save 5%
ZF Pivot pin Ø 94 mm, thickness 59,5 mm ZF front axle 4472063003
€94,43 €78,04 €89,70 €74,13
You save 5%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€980,10 €810,00 €931,00 €769,42
You save 5%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€39,10 €32,31
Calix Engine preheater complete Ø 37,8 mm, 1 1/2", with O-ring
Calix
To fit as: New Holland TM 115, 120, 125, 130, 135, 140, 150, 155, 165, 175, 190, TS 80, 90, 100, 110, 115 More
To fit as: New Holland TM 115, 120, 125, 130, 135, 140, 150, 155, 165,...
€350,13 €289,36 €316,75 €261,78
You save 10%
GRANIT Axial joint 180 mm, M20 x 1,5, M18 x 1,5 L, 25 °
GRANIT
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °.
€63,62 €52,58 €60,40 €49,92
You save 5%
GRANIT Thermostat Ø 54 mm, 82 °C
€20,00 €16,53
Sauermann Drawbar reinforced 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€1.135,44 €938,38 €1.078,65 €891,45
You save 5%
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade terminal 6.3 mm. Thread: 1/4" BSP. More
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade term...
€19,00 €15,70
LUK Single clutch 330TBFR round disc spring fingers Ford, New Holland
€334,79 €276,69 €318,00 €262,81
You save 5%
Eaton Planetary gear transmission, 326 g
Eaton
Reference no.: CAR115643 More
Reference no.: CAR115643
€43,95 €36,32
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, mounting angle r 52
€384,39 €317,68 €240,20 €198,51
You save 38%
GRANIT Outlet valve Ford, New Holland
Start switch 12 V, Ø 15,5 mm - 1 key
Version: 12 V, with blade terminal, 0: off, 1: consumer, 2: preheat, 3: start, Mounting opening Ø 15.5 / 3 mm. More
Version: 12 V, with blade terminal, 0: off, 1: consumer, 2: preheat, 3...
€25,10 €20,74
Eaton Internal plate transmission Ford, New Holland, 136 g
Eaton
Reference no.: 81805123 More
Reference no.: 81805123
€34,30 €28,35
Ball joint 220 mm, M18 x 1,5, M18 x 1,5, taper 20 - 22 mm
A: 220 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 220 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€82,63 €68,29 €78,45 €64,83
You save 5%
Ball joint 91 mm, M18 x 1,5, 7/8" x 14, taper 23,9 - 27,5 mm
A: 91 mm. C: M18 x 1,5 mm. D: 7/8" x 14 mm. E: 23,9 mm. F: 27,5 mm. Taper: 23,9 - 27,5 mm. More
A: 91 mm. C: M18 x 1,5 mm. D: 7/8" x 14 mm. E: 23,9 mm. F: 27,5 mm. Ta...
€49,83 €41,18 €47,30 €39,09
You save 5%
ROCKINGER Adapter plate 320 mm, hole pattern 83 x 56 / 160 x 100 mm, pin Ø 30 mm
ROCKINGER
Load capacity: 3000 kg. D-value: 100 kN. Rail width: 320 mm. Hole pattern: 83 x 56, 160 x 100 mm. Pin Ø: 30 mm. Guide width: 20 mm. Colour: Black. Ho... More
Load capacity: 3000 kg. D-value: 100 kN. Rail width: 320 mm. Hole patt...
€822,20 €679,50 €661,00 €546,28
You save 20%
GRAMMER Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
GRAMMER
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 400 mm. Fore/aft isolator: Optional.... More
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch:...
€1.135,80 €938,68
Sensor temperature for oil and water temperature
Version: For oil and water temperature. More
Version: For oil and water temperature.
€172,55 €142,60 €163,90 €135,45
You save 5%
Brake light switch mechanical open function NO, with plug connection
Version: Break contact, With plug connection. More
Version: Break contact, With plug connection.
€37,20 €30,74
Showing 1 - 24 of 193

Ford 6810 tractor parts for engine, clutch and steering

Plenty of farms still use a Ford 6810 every day, even though the hour meter on a typical example shows a serious number by now. With a tractor like that, it all comes down to the parts that wear: seals, the clutch, the steering and the starting system. Here you will find more than 190 Ford 6810 parts, from GRANIT, Eaton, LUK, Cobo and GRAMMER.

Engine and fuel side

For the engine there are sealing rings for the injection nozzles, exhaust gaskets and water pump gaskets. You will also find engine oil filters, V-belts and turbochargers. A tank cap looks like a minor item, but one that no longer seals lets dirt and moisture into the diesel, and the injectors pay for that later.

Whenever you pull an injector, always renew the sealing washer underneath it. A used washer has been crushed and no longer seals properly, which leads to blow-by and soot building up around the nozzle. Clean the seat thoroughly before the new washer goes in.

Fitting a turbocharger is a job where cleanliness counts. Flush or replace the oil feed line, change the engine oil and filter, and prime the new turbo with a little clean oil before the first start. Let the engine idle for a while before you open the throttle.

Driveline and clutch

The driveline is covered with clutch plates, universal joints and bushes for the transmission housing. If the clutch slips under load or will not disengage cleanly, the plate is usually worn. While it is apart, inspect the flywheel face and the release bearing as well.

Steering and drawbar

The front axle of a 6810 takes a beating in the yard and in the field. Axial joints and ball joints take the play out of the steering. After replacing an axial joint or a ball joint, reset the toe-in, otherwise the front tyres wear unevenly. At the back there are drawbars, and for the driver there are seats.

Finding the right part and related models

Locate the data plate and compare the reference number on the old part with the details on the product. On many parts for these tractors, a wire brush will make a worn number readable again.

In the Ford 10 series, the 6810 sits alongside several other models, and each of them has a page here with parts matched to that tractor:

For every other Ford tractor, carry on through Ford parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart