Menu
EUR

Ford 8240 tractor parts & technical data

This overview lists more than 180 parts for the Ford 8240. Electrics, lighting and trailer couplings are especially well represented in the range.

185 parts found for Ford 8240
Show:
Alternator 14 V, 100 A, flange 82,5 mm, Ford, Laverda, New Holland
Additional information: Compact alternator | Pulley Ø (mm): 67.0 | Charging current (A): 100 | Direction of rotation: - | Installation angle (°): r ... More
Additional information: Compact alternator | Pulley Ø (mm): 67.0 | Ch...
€240,33 €198,62 €221,10 €182,73
You save 8%
Eaton Shift ring 616 g Case IH, Ford, New Holland, Steyr
Eaton
Reference no.: E6NN7106AA More
Reference no.: E6NN7106AA
€119,82 €99,02 €110,23 €91,10
You save 8%
Eaton Locking switch transmission Ford, New Holland
Eaton
Reference no.: C7NN7A247A More
Reference no.: C7NN7A247A
€143,31 €118,44 €131,85 €108,96
You save 8%
Starter motor with reduction 12 V, 4,2 kW, 10 teeth, 253,5 mm, Ø 92 mm
Starter motor 12V 3,1 kW, 10 teeth clockwise, 257,5 mm
€301,49 €249,17 €277,37 €229,23
You save 8%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5 L, 38 °
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 L mm. F: 38 °. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 L mm. F: 38 °.
€60,87 €50,31 €56,00 €46,28
You save 8%
Ball joint 292 mm, taper 23,5 - 26,5 mm, line-Ø 36 mm, M20 x 1,5
A: 292 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. Tube Ø: 36 mm. More
A: 292 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€147,70 €122,07 €135,88 €112,30
You save 8%
Ball joint 80 mm, M27 x 1,5, 1 1/4" x 12, taper 31 - 35 mm
A: 80 mm. C: M27 x 1,5 mm. D: 1 1/4" x 12 mm. E: 31 mm. F: 35 mm. Taper: 31 - 35 mm. More
A: 80 mm. C: M27 x 1,5 mm. D: 1 1/4" x 12 mm. E: 31 mm. F: 35 mm. Tape...
€76,07 €62,87 €69,98 €57,84
You save 8%
PTO shaft end piece 1 3/8" 6 spline, 1000 rpm Ford, Fiat
Version: 1000 rpm, 1 3/8", 6 splines. More
Version: 1000 rpm, 1 3/8", 6 splines.
€261,48 €216,10 €240,56 €198,81
You save 8%
PTO shaft end piece 1 3/8" 21 spline, 1000 rpm Ford, Fiat
Version: 1000 rpm, 1 3/8" 21 splines. More
Version: 1000 rpm, 1 3/8" 21 splines.
€221,67 €183,20 €203,94 €168,54
You save 8%
ROCKINGER Adapter plate 320 mm, hole pattern 83 x 56 / 160 x 100 mm, pin Ø 30 mm
ROCKINGER
Load capacity: 3000 kg. D-value: 100 kN. Rail width: 320 mm. Hole pattern: 83 x 56, 160 x 100 mm. Pin Ø: 30 mm. Guide width: 20 mm. Colour: Black. Ho... More
Load capacity: 3000 kg. D-value: 100 kN. Rail width: 320 mm. Hole patt...
€857,96 €709,06 €661,04 €546,32
You save 23%
Piston ring set Ø 111,76 mm, 2,38 / 2,38 / 4,76 mm
Dimensions: 3 rings, Ø 111.76 mm, 2.38 mm / 2.38 mm / 4.76 mm. More
Dimensions: 3 rings, Ø 111.76 mm, 2.38 mm / 2.38 mm / 4.76 mm.
€38,54 €31,85
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
Single clutch H 330 Ford, New Holland
Additional information: Made in Germany More
Additional information: Made in Germany
€250,76 €207,24 €230,70 €190,66
You save 8%
MAHLE Alternator 14 V / 120 A, flange 81 mm, pulley-Ø 67 mm
MAHLE
Mounting hole Ø / R (mm): 8,2 / 86,0 | Pulley Ø (mm): 67.0 | Charging current (A): 120 | Nominal values (V / A): 14 / 120 | Pulley spacing (mm): 32,... More
Mounting hole Ø / R (mm): 8,2 / 86,0 | Pulley Ø (mm): 67.0 | Chargin...
€515,34 €425,90 €308,66 €255,09
You save 40%
Repair set clutch cylinder Ford, New Holland
€43,36 €35,83 €39,89 €32,97
You save 8%
SANDEN Aircon compressor 12 V, Ø 119 mm, 6 grooves, 135 ccm Ford, New Holland
SANDEN
Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable oil: SP 10 | No. of grooves: 6 | Refrigerant: R 134a | Oil quantity (ccm): 135 More
Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable ...
€539,54 €445,90 €496,38 €410,23
You save 8%
LUK Clutch plate 321TDCA 1 3/4 inch, 10 splines Ford, New Holland
LUK
Dimensions (inches): 1 3/4"" 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (inches): 1 3/4"" 10 grooves | Material specifications: Sin...
€399,81 €330,42 €367,83 €303,99
You save 8%
Eaton Gear wheel transmission Ford, New Holland
Eaton
Reference no.: E0NN7106BA More
Reference no.: E0NN7106BA
€154,42 €127,62 €142,07 €117,41
You save 8%
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, mounting angle r 52
€401,11 €331,50 €240,25 €198,55
You save 40%
Seal kit
€54,95 €45,41
Ball joint 240 mm, taper 24 - 26 mm, M20 x 1,5, M24 x 1,5
A: 240 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 240 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€91,35 €75,50 €84,04 €69,46
You save 8%
Ball joint 500 mm, 3/4" x 16, 34,8 mm
A: 500 mm. C: 3/4" x 16 mm. D: 34,8 mm. E: 23,9 mm. F: 27,4 mm. Taper: 23,9 - 27,4 mm. More
A: 500 mm. C: 3/4" x 16 mm. D: 34,8 mm. E: 23,9 mm. F: 27,4 mm. Taper:...
€123,56 €102,12 €113,68 €93,95
You save 8%
Ball joint 75 mm, 7/8" x 14 mm, 1 1/4", taper 27 - 32 mm
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27 - 32 mm. More
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27...
€120,97 €99,98 €111,29 €91,98
You save 8%
Ball joint 95 mm, M27 x 1,5, 7/8" x 14, taper 30 - 34,6 mm
A: 95 mm. C: M27 x 1,5 mm. D: 7/8" x 14 mm. E: 30 mm. F: 34,6 mm. Taper: 30 - 34,6 mm. More
A: 95 mm. C: M27 x 1,5 mm. D: 7/8" x 14 mm. E: 30 mm. F: 34,6 mm. Tape...
€193,93 €160,27 €178,42 €147,45
You save 8%
Sealing ring 74,62 x 95,24 x 9,5 mm
Dimensions: 74,62 x 95,24 x 9,5 mm. Outer Ø: 95.24 mm. Inner Ø: 74.62 mm. Height 1: 9.5 mm. More
Dimensions: 74,62 x 95,24 x 9,5 mm. Outer Ø: 95.24 mm. Inner Ø: 74.6...
€25,38 €20,97
Lift rod 720 - 865 mm, eye Ø 25,8 mm, M32 x 3 Ford, New Holland
Dimensions: Length = 720 - 865, Bolt Ø = 25, Ball Ø = 25.8 mm. Ø: 26 & 27 x 62 mm. Eye Ø: 25,8 mm. Thread: M32 x 3 mm. Length min./max.: 720 -... More
Dimensions: Length = 720 - 865, Bolt Ø = 25, Ball Ø = 25.8 mm. Ø: 2...
€333,07 €275,26 €306,42 €253,24
You save 8%
Rocker switch EHR rear operation
Version: Rear operation. More
Version: Rear operation.
€82,37 €68,07 €75,78 €62,63
You save 8%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€47,55 €39,30 €43,75 €36,15
You save 8%
Stabilus Gas strut rear window 200 N, 585,5 mm, stroke 252,5 mm
Stabilus
Passend für: Case IH Heckscheibe More
Passend für: Case IH Heckscheibe
€35,81 €29,60
Clutch master cylinder Ford, New Holland
€120,78 €99,82 €111,12 €91,83
You save 8%
AKS-Dasis Condenser #8 / #6 O-ring Ford 5640 - 8340, New Holland TS90 - TS120
AKS-Dasis
Weight (g): 3000 | Female thread (mm): #6 O-Ring | Male thread: #8 O-Ring More
Weight (g): 3000 | Female thread (mm): #6 O-Ring | Male thread: #8 O-R...
€583,38 €482,13 €536,71 €443,56
You save 8%
MAHLE Starter motor 12 V, 3,1 kW, 10 teeth, clockwise, mounting Ø 92,0 mm
€530,00 €438,02 €317,44 €262,35
You save 40%
Steering cylinder Ford, Case IH, New Holland
€648,05 €535,58 €596,21 €492,73
You save 8%
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Taper: 24 - 27 mm. More
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Tap...
€64,90 €53,64 €59,71 €49,35
You save 8%
Track rod complete 1475 mm, M20 x 1, 18 - 20 mm, 35 mm
A: 1460 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 35 mm. F: 30 mm. More
A: 1460 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 35 ...
€207,58 €171,55 €190,97 €157,83
You save 8%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °.
€88,07 €72,79 €81,02 €66,96
You save 8%
Ball joint 240 mm, taper 24 - 26 mm, M20 x 1,5, M24 x 1,5 L
A: 240 mm. C: M20 x 1,5 mm. D: M24 x 1,5 L mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 240 mm. C: M20 x 1,5 mm. D: M24 x 1,5 L mm. E: 24 mm. F: 26 mm. Tap...
€91,35 €75,50 €84,04 €69,46
You save 8%
Master brake cylinder mineral oil Ford, New Holland
€366,33 €302,75 €337,02 €278,53
You save 8%
Brake disc Ø 224 mm, thickness 4,9 mm, 22 teeth, closed New Holland, Ford
Description: 8x per tractor. More
Description: 8x per tractor.
€40,21 €33,23
Thermostat Ø 54 mm, 82 °C
Inlet valve engine BSD 332-666 Ford
€37,36 €30,88 €34,37 €28,41
You save 8%
Crankshaft seal Ø 60 x 83 x 11,5 mm Ford, New Holland
Outer Ø: 83 mm. Width: 11,5 mm. Inner Ø: 60 mm. More
Outer Ø: 83 mm. Width: 11,5 mm. Inner Ø: 60 mm.
€7,93 €6,55
Gas strut roof window 200 N, 215 mm
Newtons: 200. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. To fit: roof hatch. Form: 8. More
Newtons: 200. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. To fit: roof hat...
€32,35 €26,74
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade terminal 6.3 mm. Thread: 1/4" BSP. More
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade term...
€19,83 €16,38
Rotary switch fan, without knob, 5 connections
Version: For blower, With 5 blade terminals. More
Version: For blower, With 5 blade terminals.
€67,42 €55,72 €62,03 €51,26
You save 8%
Showing 49 - 96 of 185

Ford 8240 tractor parts

The Ford 8240 is the kind of tractor that keeps going as long as you keep up with the wear parts. This page lists more than 180 new replacement parts for it, from GRANIT, GRAMMER, MAHLE, Eaton and LUK.

Steering, engine and cab parts

  • Steering: ball joints, track rods and axial joints.
  • Engine: starter motors, alternators, piston ring sets and gaskets for the exhaust and water pump.
  • Drive and hitching: PTO shaft end pieces, drawbars and hand brake cables.
  • Cab: air suspended tractor seats, gas struts for the rear window, mirrors with holder and tank caps.

Chasing play in the steering

If the steering feels vague or the tractor wanders on the road, look for play with the wheels on the ground. Have someone rock the steering wheel back and forth while you hold each joint in turn and feel where the knock is. When you replace a ball joint, count the turns as you unscrew it from the track rod and screw the new one on by the same amount. That keeps the toe-in close enough until it can be checked properly.

Getting the right fit

The identification plate confirms that you are working on an 8240, and the reference number on the old part is the surest way to the replacement. For ball joints and track rods, compare the taper and the thread. A joint that does not seat correctly in its taper will never tighten up, however hard you pull on the spanner.

PTO, hand brake and rear window

A PTO shaft end piece with worn splines puts play into the driveshaft, and you will feel it as a clunk when the PTO engages. Replace it before the splines wear sharp and give them a light coat of grease before sliding the shaft on. A hand brake cable stretches over time and can seize in its outer sleeve. Adjust a new one so the lever has a few clicks of slack and then holds firmly, and lubricate the cable where it enters the sleeve. On the drawbar, check the pin and the rail, and replace a pin that has worn oval.

A gas strut that no longer holds the rear window open takes minutes to swap. Fit it rod down so the internal seal stays lubricated.

The 40 series

The Ford 5640 from the same 40 series has its own page. Look up each tractor separately, even when they share a series. You can browse the rest of the Ford range through Ford parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart