Menu
EUR

Landini 8550 tractor parts & technical data

Brakes and transmission, lighting, steering and front axle: these are some of the groups among more than 90 parts for the Landini 8550 from the 50 series.

93 parts found for Landini 8550
Show:
Perkins Sealing ring crankshaft rear Ø 130 x 159 x 11 mm
6%
Perkins
Sealing ring crankshaft rear Ø 130 x 159 x 11 mm
€84,05 €69,46 €78,75 €65,08
 
Feed pump 4 hole, hole spacing 25/45 mm, flange up to lever 34 mm
Feed pump 4 hole, hole spacing 25/45 mm, flange up to lever 34 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 45 mm, ...
€27,75 €22,93
 
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:8, Ø 17,46 mm, clockwise
5%
Bosch/Rexroth
Hydraulic pump 16 cm³/rpm., taper 1:8, Ø 17,46 mm, clockwise
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating pressure ma...
€535,44 €442,51 €508,65 €420,37
 
Bush 60 x 65 x 40 mm Landini, Massey Ferguson
5%
Bush 60 x 65 x 40 mm Landini, Massey Ferguson
Dimensions: 60 x 65 x 40 mm.
€32,34 €26,73 €30,70 €25,37
 
GRANIT Double clutch DuT 280 organic 35 x 40 mm, 14 splines Landini
5%
GRANIT
Double clutch DuT 280 organic 35 x 40 mm, 14 splines Landini
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14 grooves |...
€643,08 €531,47 €610,90 €504,88
 
Repair set brake cylinder Massey Ferguson, Landini
5%
Repair set brake cylinder Massey Ferguson, Landini
€34,62 €28,61 €32,85 €27,15
 
Connecting rod bearing standard, Ø 63,47 mm Landini, Massey Ferguson
Connecting rod bearing standard, Ø 63,47 mm Landini, Massey Ferguson
Dimensions: Ø 63.47 mm.
€20,90 €17,27
 
GRANIT Single hydraulic pump 11,9 cm³/rpm. anticlockwise Landini
5%
GRANIT
Single hydraulic pump 11,9 cm³/rpm. anticlockwise Landini
Output volume: 11,9 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotati...
€334,20 €276,20 €317,45 €262,36
 
GRANIT Single hydraulic pump 11,9 cm³/rpm. clockwise Landini
5%
GRANIT
Single hydraulic pump 11,9 cm³/rpm. clockwise Landini
Output volume: 11,9 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotati...
€240,29 €198,59 €228,25 €188,64
 
Spacer Landini series 30-560
5%
Spacer Landini series 30-560
€34,36 €28,40 €32,60 €26,94
 
Cobo Indicator switch 12 V / 8,5 A, 24 V / 5 A, left and right
Cobo
Indicator switch 12 V / 8,5 A, 24 V / 5 A, left and right
Version: power rating: 12 V = 8,5 A, 24 V = 5A, functions: centre position off, ...
€34,70 €28,68
 
Master brake cylinder 2 connections DOT 4 Landini, Massey Ferguson
5%
Master brake cylinder 2 connections DOT 4 Landini, Massey Ferguson
Description: 2 connections.
€208,79 €172,55 €198,35 €163,93
 
Brake disc Ø 165 x 13 mm, 13 teeth Landini, Massey Ferguson
5%
Brake disc Ø 165 x 13 mm, 13 teeth Landini, Massey Ferguson
€59,46 €49,14 €56,45 €46,65
 
Crankshaft, 4-cylinder, een hole Massey Ferguson, Landini
5%
Crankshaft, 4-cylinder, een hole Massey Ferguson, Landini
Notes: Please follow the instructions in the installation guide. Please complete...
€568,64 €469,95 €540,20 €446,45
 
GRANIT Brake disc Ø 178 x 12,7 mm, 13 teeth Landini, Massey Ferguson
5%
GRANIT
Brake disc Ø 178 x 12,7 mm, 13 teeth Landini, Massey Ferguson
€107,64 €88,96 €102,25 €84,50
 
Showing 73 - 93 of 93

Landini 8550 parts for the engine, hydraulics and seat

The Landini 8550 has more than 90 replacement parts on this page, from GRANIT and from makers such as GRAMMER, Cobo, KS and Perkins. They cover the jobs that come up on an older tractor of this type: an engine that burns oil, a lift that drops, a brake that feels soft or a seat that has seen too many seasons.

Engine work on the 8550

Piston ring sets and complete pistons are here for anyone opening up the block, together with sealing rings, gaskets and seals. On the fuel side you will find feed pumps and regulator springs, and the cooling system is covered with radiators. Silencers complete the exhaust.

A tip before fitting new rings: measure the cylinder bore first. If there is a clear ridge worn at the top of the bore, fresh rings will not seal well against it, and a complete piston set is the better repair. Check each ring gap in the bore before fitting, and stagger the gaps around the piston so they do not line up.

Hydraulics, brakes and the driver's seat

  • Lift system: hydraulic pumps and sealing rings for the lift cylinder.
  • Brakes: repair sets for the brake cylinder in the old version.
  • Warning lamps: oil pressure switches for the engine.
  • Seating: GRAMMER Compacto seats and an air suspended tractor seat.

After rebuilding a brake cylinder, flush the whole system with fresh brake fluid. Old fluid absorbs moisture and attacks new rubber cups far sooner than you would expect.

Regulator springs are small parts that are easy to overlook. A tired spring lets the engine speed hunt under load and leaves the idle unsettled, so it makes sense to replace it while the fuel side is being worked on anyway. Silencers are best fitted with fresh clamps and brackets, since a loose box soon cracks at the pipe from vibration.

Matching a part to your tractor

The type plate tells you that the machine is an 8550. Beyond that, the old part is your best guide. Pumps, radiators and cylinders usually carry a reference number cast or stamped into the housing, and comparing that number with the details on this page avoids ordering the wrong thing. With a hydraulic pump, also compare the direction of rotation and the shaft connection.

Other tractors in the 50 series

The 8550 belongs to the Landini 50 series, and two related models have their own page. The Landini 6550 and the Landini 7550 each list the parts that fit that specific model, so order for the type on your plate. Tractors from the rest of the Landini line up are grouped under Landini parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart