Menu
EUR

Renault 75-34 tractor parts & technical data

Trailer couplings and lighting are the best represented groups in this overview for the Renault 75-34. Altogether there are more than 100 matching parts.

91 parts found for Renault 75-34
Show:
ROCKINGER Flange hitch automatic spherical pin 38 mm, 140 x 80 mm, M17
20%
ROCKINGER
Flange hitch automatic spherical pin 38 mm, 140 x 80 mm, M17
Lock: Automatic bolt. Connecting pin: 38 mm. Hole pattern: 140 x 80 mm. Hole: M1...
€844,35 €697,81 €678,86 €561,04
 
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable...
€1.079,85 €892,44
 
KS Piston set, complete Ø 105 mm, piston pin 35 x 82 mm, Fendt, Renault
5%
KS
Piston set, complete Ø 105 mm, piston pin 35 x 82 mm, Fendt, Renault
Dimensions: 4 rings, Ø 105 mm, Gudgeon pin Ø 35 x 82 mm, Combustion chamber Ø 62...
€297,42 €245,80 €282,50 €233,47
 
GRANIT Connecting rod bearing standard, Ø 58 mm Fendt, Renault
GRANIT
Connecting rod bearing standard, Ø 58 mm Fendt, Renault
Dimensions: Ø 58 mm. Menke no.: 59703.
€26,15 €21,61
 
GRANIT Stabilizer strut 560 mm, Ø 22 mm, M24 x 3 mm Renault
5%
GRANIT
Stabilizer strut 560 mm, Ø 22 mm, M24 x 3 mm Renault
d: 22 mm. h: 35 mm. D: 24 x 3 mm. L: 560 mm. L1: 460 mm. Dimensions: 560 mm.
€55,83 €46,14 €53,00 €43,80
 
Scharmüller Flange hitch automatic 38 mm, 140 x 80 mm, M16, 2000 kg, 82,4 kN
12%
Scharmüller
Flange hitch automatic 38 mm, 140 x 80 mm, M16, 2000 kg, 82,4 kN
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value...
€1.000,29 €826,69 €884,65 €731,12
 
Bosch/Rexroth Hydraulic pump 8 cm³/rpm., claw 17 x 8, left Renault
10%
Bosch/Rexroth
Hydraulic pump 8 cm³/rpm., claw 17 x 8, left Renault
Output volume (cc/rev): 8 | Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 151722248...
€535,92 €442,91 €484,85 €400,70
 
GRANIT Ball joint taper 18 - 20,2 mm, length 100 mm, M16 x 1,5, M16 x 1,5
5%
GRANIT
Ball joint taper 18 - 20,2 mm, length 100 mm, M16 x 1,5, M16 x 1,5
A: 100 mm. C: M16 x 1,5 mm. D: M16 x 1,5 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 2...
€41,24 €34,08 €39,15 €32,36
 
GRANIT Double hydraulic pump 19 + 11 cm³/rpm., taper 1:5 Renault
5%
GRANIT
Double hydraulic pump 19 + 11 cm³/rpm., taper 1:5 Renault
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5. Fitting Ø: 80 mm.
€623,45 €515,25 €592,25 €489,46
 
GRANIT Main bearing standard Ø 70 mm Fendt, Renault
5%
GRANIT
Main bearing standard Ø 70 mm Fendt, Renault
Dimensions: Ø 70 mm.
€34,23 €28,29 €32,50 €26,86
 
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Co...
€27,00 €22,31
 
Ball joint 95 mm, M16 x 1,5, M24 x 1,5 L, taper 18 - 20,2 mm
5%
Ball joint 95 mm, M16 x 1,5, M24 x 1,5 L, taper 18 - 20,2 mm
A: 95 mm. C: M16 x 1,5 mm. D: M24 x 1,5 L mm. E: 18 mm. F: 20,2 mm. Taper: 18 - ...
€55,07 €45,51 €52,30 €43,22
 
Repair set brake cylinder John Deere, Renault, Fendt
5%
Repair set brake cylinder John Deere, Renault, Fendt
€48,46 €40,05 €46,00 €38,02
 
GRANIT Engine preheater complete connection Ø 50 mm, kerngat Ø 45 mm
5%
GRANIT
Engine preheater complete connection Ø 50 mm, kerngat Ø 45 mm
Connection: Ø 50 mm, (Ø 45 mm core hole) with O-ring. To fit: Fendt.
€302,35 €249,88 €287,20 €237,36
 
GRANIT Cylinder head gasket set cylinder head gasket 1,4 mm thick Renault, Fendt
5%
GRANIT
Cylinder head gasket set cylinder head gasket 1,4 mm thick Renault, Fendt
€42,86 €35,42 €40,70 €33,64
 
GRANIT Connecting rod bush Ø 35 mm Case IH, Renault, Steyr
GRANIT
Connecting rod bush Ø 35 mm Case IH, Renault, Steyr
Dimensions: 35 mm.
€28,80 €23,80
 
GRANIT Connecting rod bush outer-Ø 38 mm, inner-Ø 32 mm Fendt, Renault
5%
GRANIT
Connecting rod bush outer-Ø 38 mm, inner-Ø 32 mm Fendt, Renault
Dimensions: 32 mm.
€33,13 €27,38 €31,45 €25,99
 
Cobo Rear light left / right 120 x 80 x 56 mm, 12 V
10%
Cobo
Rear light left / right 120 x 80 x 56 mm, 12 V
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Cable entry via grommet. W...
€35,83 €29,61 €32,40 €26,78
 
GRANIT Ball joint 95 mm, M16 x 1,5, M24 x 1,5, taper 18 - 20,2 mm
5%
GRANIT
Ball joint 95 mm, M16 x 1,5, M24 x 1,5, taper 18 - 20,2 mm
A: 95 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20...
€40,33 €33,33 €38,30 €31,65
 
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
 
Main bearing standard Ø 70 mm Fendt, Case IH, Renault, Steyr
5%
Main bearing standard Ø 70 mm Fendt, Case IH, Renault, Steyr
Dimensions: Ø 70 mm.
€33,70 €27,85 €32,00 €26,45
 
Feed pump 2 hole, hole spacing 53 mm, flange 52 mm Renault, Fendt
5%
Feed pump 2 hole, hole spacing 53 mm, flange 52 mm Renault, Fendt
Version: 2 holes, Hole spacing: 53 mm, Flange to lever end: 52 mm. To fit: Renau...
€48,22 €39,85 €45,80 €37,85
 
Showing 1 - 24 of 91

Renault 75-34 parts for an engine rebuild, hydraulics and steering

When the engine of a 75-34 comes apart, you want every bearing, bolt and seal on the bench before the first nut is undone. There are more than 100 parts for this Renault from the R series, and a fair number of them belong inside the engine: main bearings, connecting rod bearings, connecting rod bolts and injection nozzles. Around them sit radiator hoses, a hydraulic double pump, ball joints and hitching gear from GRANIT, Walterscheid, GRAMMER, ROCKINGER and Bosch/Rexroth.

Bearings, bolts and injectors

Measure the crankshaft journals before ordering bearings. If they are round and within size, a standard bearing will do. If the crank has been reground, the undersize of the new bearing must match the grind. Connecting rod bolts stretch permanently when they are torqued, so they should never be reused. Have a fresh set ready for every rod you take off.

If the tractor starts poorly or smokes black under load, have the injection nozzles pressure tested by a diesel specialist first. The test shows whether opening pressure and spray pattern are still right before you spend anything. Always fit new copper washers when the nozzles go back in. A stop cable and a tube for the pipework complete the engine side.

Hydraulics, steering and the three-point linkage

  • An anticlockwise double pump for the hydraulic system
  • Ball joints for the track rod
  • Stabilizer struts and spindles for the three-point linkage
  • Flange hitches, ball drawbars and a top drawbar
  • An air suspended GRAMMER tractor seat

A simple trick when changing a ball joint: count the turns it takes to unscrew the old joint from the track rod and screw the new one on by the same amount. Toe-in will then be close, which makes the final adjustment much quicker. Clean and lightly grease the threads of the linkage spindles before setting their length, or the adjustment will seize after a season in the dirt.

Identifying your tractor in the R series

Many tractors in this range look almost identical, so the type plate is the place to confirm you are working on a 75-34. For bearings and nozzles, the number on the old part is the quickest cross-check against the reference number shown with each product.

Other tractors from the range have their own pages listing only the parts that suit them. See the Renault 75-32, Renault 75-12, Renault 65-32, Renault 70-12, Renault 68-12 and Renault 65-12. For the Renault 681, the 85-34 and every other model of the brand, head to Renault parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart