Menu
EUR

Renault Ceres 85 tractor parts & technical data

Need a trailer coupling, electrics or front axle parts for a Renault Ceres 85? More than 160 parts for this Ceres series tractor are listed on this page.

153 parts found for Renault Ceres 85
Show:
GRANIT Cylinder head gasket set upper engine 4039D-4045T John Deere, Renault
€151,14 €124,91 €143,55 €118,64
You save 5%
Cylinder head gasket John Deere, Renault
€34,09 €28,17 €32,35 €26,74
You save 5%
GRANIT Thrust bearing standard without thrust washer Ø 80 mm
GRANIT
Dimensions: Ø 80 mm. More
Dimensions: Ø 80 mm.
€40,29 €33,30 €38,25 €31,61
You save 5%
GRANIT Seal kit upper 1 cylinder ZKD 1,15 mm MWM D 226, TD 226, TD 228
€35,61 €29,43 €33,80 €27,93
You save 5%
GRANIT Injection nozzle Renault Ceres 65-95, 58-12 - 133-54
GRANIT
Type formula: BDLL150S6741CF, 0433272007. More
Type formula: BDLL150S6741CF, 0433272007.
€43,86 €36,25 €41,65 €34,42
You save 5%
Double hydraulic pump 22,5 + 11 cm³/rpm., taper 1:8, Ø 17,46
Output volume: 22,5 + 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Menke no.: 49382. More
Output volume: 22,5 + 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Men...
€1.135,59 €938,50 €1.078,80 €891,57
You save 5%
Alternator 14 V / 65 A, form B, flange 27,0 mm, pulley-Ø 74,0 mm
To fit as: Renault 751, 891, 951, 952, 981, 103-12, 103-14, 103-54, 106-14, 106-54, 113-12, 113-14, 145-4, 145-54, 155-54, 160-94, 175-74, 180-94, 61-... More
To fit as: Renault 751, 891, 951, 952, 981, 103-12, 103-14, 103-54, 10...
€255,85 €211,45 €231,45 €191,28
You save 10%
LUK Clutch kit flywheel 3 mm raised double plate connection
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228012110, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€1.099,61 €908,77 €994,85 €822,19
You save 10%
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B John Deere, Renault
MAHLE
Additional information: Dust-tight | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal values (V / A): 14 / 65 | Pulley Ø (mm): 80.0 | Charging cu... More
Additional information: Dust-tight | Mounting L / d / R (mm): 56,0 / 8...
€287,64 €237,72 €179,75 €148,55
You save 38%
LUK Clutch plate 280UKF 22 x 25 mm, 13 splines, organic, thickness 7,7 mm
LUK
Dimensions (mm): 22 x 25 13 grooves Thickness: 7.7 | Material specifications: Organic clutch lining More
Dimensions (mm): 22 x 25 13 grooves Thickness: 7.7 | Material specific...
€160,08 €132,30 €152,00 €125,62
You save 5%
LUK Double clutch 310/310TGU6 40 x 45 mm, 16 splines, flywheel 3 mm
LUK
Dimensions (mm): 40 x 45 16 grooves | Flywheel dimension (mm): 3 | Material specifications: Organic clutch lining More
Dimensions (mm): 40 x 45 16 grooves | Flywheel dimension (mm): 3 | Mat...
€1.078,61 €891,41 €1.024,65 €846,82
You save 5%
MAHLE Alternator 14 V, 120 A, pulley-Ø 50 mm Renault Ares, Celtis, Ceres, Temis
MAHLE
Nominal values (V / A): 14 / 120 | Pulley Ø (mm): 50.0 | Installation angle (°): r 10 | Belt width (mm) / type: PV x 8 | Additional information: Com... More
Nominal values (V / A): 14 / 120 | Pulley Ø (mm): 50.0 | Installation...
€325,54 €269,04 €203,45 €168,14
You save 38%
LUK Clutch kit double plate connection, without release bearing
LUK
Contents: Pressure plate 458233003510, clutch plate 458331010616. Connection: For vehicles with double-disc clutch. Supplementary set: Without release... More
Contents: Pressure plate 458233003510, clutch plate 458331010616. Conn...
€1.384,24 €1.144,00 €1.315,00 €1.086,78
You save 5%
GRANIT Starter ring gear Ø 350/317 mm, 115 teeth Renault
GRANIT
Version: Ø 350/317 mm, 115 teeth. More
Version: Ø 350/317 mm, 115 teeth.
€319,32 €263,90 €303,35 €250,70
You save 5%
GRANIT Water pump with gasket John Deere, Renault
€211,94 €175,16 €201,30 €166,36
You save 5%
GRANIT Radiator hose, bottom inner-Ø 37 mm Renault
GRANIT
Inner Ø: 37 mm. More
Inner Ø: 37 mm.
€83,55 €69,05 €79,35 €65,58
You save 5%
Radiator hose, top thermostat inner-Ø 35 / 38 mm Renault
€43,61 €36,04 €41,40 €34,21
You save 5%
Main bearing standard Ø 80 mm John Deere, Renault
Dimensions: Ø 80 mm. Menke no.: 59705. More
Dimensions: Ø 80 mm. Menke no.: 59705.
€26,90 €22,23
Showing 97 - 120 of 153

Renault Ceres 85 parts for the engine, clutch and hydraulics

Many a Ceres 85 has worked on the same farm for a long time. Sooner or later the engine smokes on a cold start, the linkage lifts sluggishly or the alternator stops keeping the battery charged. For jobs like these there are more than 160 Renault Ceres 85 parts on this page, from GRANIT, LUK, Walterscheid, MAHLE and Elring.

Injectors, bearings and gaskets

On the fuel side you can fit injection nozzles and O-rings for the feed pump. Going further into the engine, there are connecting rod bearings, cylinder head gasket sets and individual gaskets. An alternator keeps the battery topped up.

A tip on injectors: whenever you take them out, renew the copper sealing washers underneath and have the opening pressure tested if you are unsure. A dribbling nozzle causes white or black smoke on a cold start and, over time, washes the oil film off the cylinder wall. Tighten them to the specified torque afterwards, not by feel.

If the battery charges poorly, measure the voltage across the battery terminals with the engine running before you replace the alternator. A slack belt or a bad earth connection gives the same symptoms. Connecting rod bearing shells are never replaced one at a time, and the crank journal should always be checked for scoring.

Hydraulic pump and seals

For the hydraulics there is a double pump, along with seals for the hydraulic pump. If the linkage rises slowly or drops back, check the filter and oil level first. If both are fine, a leaking pump seal or a worn pump is next in line.

Clutch, steering and cooling

For the clutch there are complete clutch kits with a double plate design, double clutch assemblies and separate clutch plates, including one for the PTO. Flange hitches and drawbars fit the rear. Ball joints take care of the steering, and radiator hoses, for example for the oil cooler, cover the cooling side.

Matching the part

The type plate on the Ceres 85 gives the type and chassis number. For engine and clutch parts the engine number helps as well, because it settles bearing size and gasket thickness. A number on the old part is a second reference point, particularly for an alternator or clutch plate.

The Ceres line also includes the Ceres 95. For that type and every other Renault tractor, start at Renault parts, where each type from the brand is shown with its own parts. This page sticks to what fits the Ceres 85.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart