Menu
EUR

Renault Ceres 95 tractor parts & technical data

The Renault Ceres 95 is covered by more than 150 parts in our range. Browse trailer couplings, electrics and steering and front axle parts, among others.

145 parts found for Renault Ceres 95
Show:
Double clutch 280 40 x 45 mm, 16 splines John Deere, Renault
5%
Double clutch 280 40 x 45 mm, 16 splines John Deere, Renault
Additional information: Made in Germany | Dimensions (mm): 40 x 45, 16 grooves |...
€657,03 €543,00 €624,15 €515,83
 
MAHLE Alternator 14 V / 95 A, pulley-Ø 80 mm, form B John Deere, Renault
38%
MAHLE
Alternator 14 V / 95 A, pulley-Ø 80 mm, form B John Deere, Renault
Nominal voltage (V): 14 | Additional information: Compact alternator, dust-tight...
€258,84 €213,92 €161,75 €133,68
 
GRANIT Clutch plate 280, 22 x 25 mm, 13 splines Renault
5%
GRANIT
Clutch plate 280, 22 x 25 mm, 13 splines Renault
Dimensions (mm): 22 x 25, 13 grooves | Additional information: Made in Germany
€169,59 €140,16 €161,10 €133,14
 
GRANIT Thrust bearing driving clutch closed version 65 x 97 x 23 mm
5%
GRANIT
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23
€79,10 €65,37 €75,10 €62,07
 
Thrust bearing closed version 106 x 140 x 25 mm
5%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€129,08 €106,68 €122,60 €101,32
 
GRANIT Alternator 14 V / 70 A Massey Ferguson, Renault
5%
GRANIT
Alternator 14 V / 70 A Massey Ferguson, Renault
Form: B | Pulley Ø (mm): 80.0 | Pulley spacing (mm): 27,0 | Mounting hole Ø / R ...
€184,09 €152,14 €174,85 €144,50
 
GRANIT Double yoke double joint Carraro front axle 145281
5%
GRANIT
Double yoke double joint Carraro front axle 145281
€144,76 €119,64 €137,50 €113,64
 
GRANIT Axial joint 204 mm, M22 x 1,5, M22 x 1,5, Ø 52 mm, Ø 35 mm
5%
GRANIT
Axial joint 204 mm, M22 x 1,5, M22 x 1,5, Ø 52 mm, Ø 35 mm
A: 204 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 52 mm. Ø E: 35 mm.
€81,34 €67,22 €77,25 €63,84
 
GRANIT Ball joint 210 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 25,5 mm
5%
GRANIT
Ball joint 210 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 25,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 25,5 mm. Taper: 23,5...
€79,76 €65,92 €75,75 €62,60
 
Master brake cylinder DOT 4 Renault, John Deere
5%
Master brake cylinder DOT 4 Renault, John Deere
€210,72 €174,15 €200,15 €165,41
 
GRANIT Water pump with gasket John Deere, Renault
5%
GRANIT
Water pump with gasket John Deere, Renault
€211,94 €175,16 €201,30 €166,36
 
Radiator hose, top thermostat inner-Ø 23 mm Renault
Radiator hose, top thermostat inner-Ø 23 mm Renault
Inner Ø: 23 mm.
€31,90 €26,36
 
GRANIT Intake gasket inner Ø 54,5 mm, hole spacing 87 mm John Deere, Renault
GRANIT
Intake gasket inner Ø 54,5 mm, hole spacing 87 mm John Deere, Renault
Dimensions: innen Ø54,5 mm, Lochabstand 87 mm, Schrauben Ø 11 mm.
€2,94 €2,43
 
GRANIT Cylinder head gasket set upper engine 4039D-4045T John Deere, Renault
5%
GRANIT
Cylinder head gasket set upper engine 4039D-4045T John Deere, Renault
€151,14 €124,91 €143,55 €118,64
 
Cylinder head gasket John Deere, Renault
5%
Cylinder head gasket John Deere, Renault
€34,09 €28,17 €32,35 €26,74
 
Crankshaft seal rear Ø 117,8 x 146,25 x 13,8 mm John Deere, Renault
5%
Crankshaft seal rear Ø 117,8 x 146,25 x 13,8 mm John Deere, Renault
€50,15 €41,45 €47,60 €39,34
 
GRANIT Seal kit upper 1 cylinder ZKD 1,15 mm MWM D 226, TD 226, TD 228
5%
GRANIT
Seal kit upper 1 cylinder ZKD 1,15 mm MWM D 226, TD 226, TD 228
€35,61 €29,43 €33,80 €27,93
 
GRANIT Injection nozzle Renault Ceres 65-95, 58-12 - 133-54
5%
GRANIT
Injection nozzle Renault Ceres 65-95, 58-12 - 133-54
Type formula: BDLL150S6741CF, 0433272007.
€43,86 €36,25 €41,65 €34,42
 
Double hydraulic pump 22,5 + 11 cm³/rpm., taper 1:8, Ø 17,46
5%
Double hydraulic pump 22,5 + 11 cm³/rpm., taper 1:8, Ø 17,46
Output volume: 22,5 + 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Menke no.: 493...
€1.135,59 €938,50 €1.078,80 €891,57
 
GRANIT Door lock, left Renault Ares 540, Ergos 466
5%
GRANIT
Door lock, left Renault Ares 540, Ergos 466
€112,80 €93,22 €107,15 €88,55
 
Alternator 14 V / 65 A, form B, flange 27,0 mm, pulley-Ø 74,0 mm
10%
Alternator 14 V / 65 A, form B, flange 27,0 mm, pulley-Ø 74,0 mm
To fit as: Renault 751, 891, 951, 952, 981, 103-12, 103-14, 103-54, 106-14, 106-...
€255,85 €211,45 €231,45 €191,28
 
LUK Clutch kit flywheel 3 mm raised double plate connection
10%
LUK
Clutch kit flywheel 3 mm raised double plate connection
Supplementary set: Without release bearing | Connection: For vehicles with doubl...
€1.099,61 €908,77 €994,85 €822,19
 
Showing 73 - 96 of 145

Renault Ceres 95 parts for the clutch, engine and steering

If a Ceres 95 slips when pulling away or the clutch no longer disengages cleanly, it is time to split the tractor. So the clutch comes first here. It holds more than 150 Renault Ceres 95 parts, from GRANIT and from makers such as LUK, Walterscheid, MAHLE and Elring.

Renewing the double clutch

For the clutch there are pressure plates for a double clutch, separate clutch plates and complete double plate clutch kits, including LUK parts. Some of those kits come without a release bearing. With the tractor split anyway, inspect the release bearing and the guide sleeve it slides on. A bearing that hums or feels rough will otherwise have you pulling it apart again before long. Use an alignment tool during assembly so the plates line up exactly and the input shaft slides into the hub without force.

Engine and cooling

If the cylinder head has to come off, you can choose between a single head gasket and a complete head gasket set, for example from Elring. There are also injection nozzles, feed pump O-rings, sealing rings and individual gaskets. Radiator hoses, such as the hose to the oil cooler, should be replaced when the rubber crackles under your fingers or feels soft and swollen. An alternator keeps the battery charged.

Steering and hydraulics

Steering play is dealt with by fitting new track rod ball joints. After setting the toe, tighten the lock nut properly and fit a fresh split pin where one is used. For the hydraulics there are seals, and at the rear a Walterscheid flange hitch fits this tractor.

Dirty injection nozzles often show themselves through black smoke and a rough idle. Replace nozzles as a set where you can, and fit a new sealing ring under every holder. An old ring that has already been crushed once will not seal properly again and lets compression escape.

Which part suits your Ceres

The type plate tells you exactly which model you have. After that, find the number on the worn part and check it against the reference number of the product. With clutch plates, also count the splines in the hub, because plates with the same outer size can have a different hub.

From the same Ceres line, the Renault Ceres 85 has its own page of matching parts. The rest of the Renault tractor line-up is gathered under Renault parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart