Need a part for the Same Antares 100? More than 100 items fit this model, including lighting, electrics and trailer couplings for your tractor.
Slow hydraulics, an oil weep from the pump, a cracked lamp after a hard winter. On this page you will find more than 100 parts that fit the Same Antares 100 for exactly these jobs, from GRANIT, Cobo, GRAMMER, ROCKINGER and Walterscheid.
The hydraulic side is covered by hydraulic pump seals, complete seal kits and a combined hydraulic and transmission oil filter. On the engine there are cylinder head gaskets and alternators. For lighting you can choose headlights, rear lights, indicator and position lights and spare lamp glass. In the cab there are rocker switches for the rear work lights, a starter switch, mirrors and air suspended tractor seats. The windscreen frame has its own gas struts, and drawbars with a locking pin complete the set.
Clean the filter head and the area around it before you remove the old element, so no grit drops into the system the moment it is open. Wipe a thin film of clean oil on the rubber seal of the new filter and tighten it by hand. Run the engine briefly and check that it stays dry before you top up the oil.
When you replace a hydraulic pump seal, inspect the shaft where the lip runs. If the old seal has worn a groove into it, a new seal will soon leak again unless the running surface is restored.
A starter switch on its way out tends to give vague symptoms at first. The tractor starts one time and not the next, or the gauges flicker when you touch the key. Before you replace the switch, check that the plug behind the ignition lock is seated firmly and that the contacts show no burn marks. Often a clean connection is all it takes.
The Antares 100 belongs to the Antares range from Same. The type plate confirms the model, and for seals and filters the reference number on the old part is what settles it. On a filter it is usually printed on the outside, on a seal kit on the packaging. Keep the old part until the new one is fitted.
Headlights and lamp glass are made for one side. A left hand headlight cannot simply go on the right, because the beam pattern is set differently.
For a tractor seat, look at the mounting underneath and the suspension you want. Measure the distance between the mounting holes on your present seat, and you will know whether a new one bolts straight onto the console.
If there is another tractor from this maker in your shed, the overview of Same parts lists every type with its own page.
