Menu
EUR

Fendt 312 Vario (Typ 325) tractor parts & technical data

Typ 325 is one generation of the Fendt 312 Vario. Check your type plate, then pick from more than 400 parts such as lighting, electrics and trailer couplings.

437 parts found for Fendt 312 Vario
Show:
Gasket front cover Fendt, Deutz-Fahr
Gasket front cover Fendt, Deutz-Fahr
€22,10 €18,26
 
High-pressure pump Fendt, Deutz-Fahr, Lamborghini
5%
High-pressure pump Fendt, Deutz-Fahr, Lamborghini
€678,51 €560,75 €644,55 €532,69
 
Pressure regulator Fendt, SAME, Deutz-Fahr
5%
Pressure regulator Fendt, SAME, Deutz-Fahr
€133,37 €110,22 €126,70 €104,71
 
GRANIT Rubber floor mat black with engine brake Fendt 309 (Typ 322) - 724 (Typ 765)
5%
GRANIT
Rubber floor mat black with engine brake Fendt 309 (Typ 322) - 724 (Typ 765)
Material: Rubber. Colour: Black. Type: Fendt 300/500/700 Vario series. Technical...
€135,51 €111,99 €128,70 €106,36
 
GRANIT Bearing window handle side window Fendt
GRANIT
Bearing window handle side window Fendt
€24,55 €20,29
 
Door lock, left Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
5%
Door lock, left Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€59,17 €48,90 €56,20 €46,45
 
Hinge pin rear screen hinge Fendt
Hinge pin rear screen hinge Fendt
€4,72 €3,90
 
GRANIT Handle Fendt Farmer 240 S (Typ 294), GT 380 (Typ 149)
5%
GRANIT
Handle Fendt Farmer 240 S (Typ 294), GT 380 (Typ 149)
€39,45 €32,60 €37,45 €30,95
 
GRANIT Holder for raamgreepbevestiging Fendt
GRANIT
Holder for raamgreepbevestiging Fendt
€4,11 €3,40
 
GRANIT Valve left and right Fendt Farmer 306-309, Fendt 309-313
5%
GRANIT
Valve left and right Fendt Farmer 306-309, Fendt 309-313
€192,54 €159,12 €182,90 €151,16
 
GRANIT Adjusting nut for lower link strut M22 x 2,5 mm Fendt
5%
GRANIT
Adjusting nut for lower link strut M22 x 2,5 mm Fendt
Dimensions: Thread = M22 x 2.5 mm.
€47,67 €39,40 €45,25 €37,40
 
Pin for lower link support 22 x 89 mm Fendt
Pin for lower link support 22 x 89 mm Fendt
Dimensions: 22 x 89 mm.
€35,45 €29,30
 
Hydraulic top link cat. 3 / 2, 660 / 888 mm, stroke 228 mm
5%
Hydraulic top link cat. 3 / 2, 660 / 888 mm, stroke 228 mm
Top link type: hydraulic. Type: Tail hook/clevis joint. A cat.: 3 / 32. B cat.: ...
€660,84 €546,15 €627,75 €518,80
 
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 m...
€32,90 €27,19
 
GRANIT Handle Fendt, Massey Ferguson
GRANIT
Handle Fendt, Massey Ferguson
€36,65 €30,29
 
Walterscheid Ball insert system 80, shank 60 x 60 mm, working length 203 mm
21%
Walterscheid
Ball insert system 80, shank 60 x 60 mm, working length 203 mm
Shaft cross section W x H: 60 x 60 mm. Overhang: 203 mm. Hole spacing: 115 mm. H...
€2.419,03 €1.999,20 €1.900,65 €1.570,79
 
GRANIT Handle body parts Fendt
GRANIT
Handle body parts Fendt
€14,65 €12,11
 
Showing 289 - 312 of 437

Fendt 312 Vario Typ 325 parts

If your 312 Vario carries Typ 325 on its plate, this page shows exactly what suits that version: more than 400 parts, with anything that belongs only on another 312 Vario left out. It runs from work lights through to the bushes and pins in the pivots.

Lights for long days

Working late into autumn evenings means a good part of the day is spent under work lights. For the Typ 325 there are LED work lights from HELLA and other makers, plus holders to mount them on the cab or mudguards. Rotating beacons are here too, along with the spring for the beacon holder.

When you replace a work light, look at the holder as well. A cracked or shaken-loose holder lets the lamp bounce over every bump, and that vibration takes its toll on the lamp and the wiring. Mount the new light on a solid holder, tighten it properly and route the cable so it does not rub on a sharp edge.

Switches and controls

In the cab of the Typ 325 there are push button switches, such as the red hazard light switch with a lock, rocker switches and rotary potentiometers. If a switch stops working, check the plug behind the panel before replacing the part. There are also handles, gas struts for the windscreen frame and rubber floor mats.

Do not underestimate a loose handle. You climb in and out many times a day, often with muddy boots, and that handle is the one thing you are holding on to. If it wobbles or the plastic has cracked, replace it before it gives way under your weight.

Pivots, seals and the trailer

  • bushes for linkage joints, which also suit a number of Massey Ferguson tractors
  • pins for hinges and pivots
  • seals for the engine and hydraulics
  • springs for the mudguards
  • Wabco coupling heads with the cover that closes them

If you are working on a pivot anyway, replace the bush and pin as a pair. A new pin in a bush that has worn oval will have play again before long.

Other versions and related tractors

If you are not certain it is a Typ 325, the Fendt 312 Vario page shows all versions together. The other versions each have their own page: Typ 339, Typ 349 and Typ 352. When in doubt, the reference number on the old part is the surest check.

From the Fendt 300, the 309 Vario, 310 Vario, 311 Vario, 313 Vario and 314 Vario also have pages of their own. Work lights, switches and cab parts are often the same across the range. The overview of the whole brand is at Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart