Web Analytics
Fendt Farmer 309 (Typ 309) tractor parts & specs
Menu
EUR

Tractor parts Fendt Farmer 309 (Typ 309)

Looking for parts for your Fendt Farmer 309 (Typ 309) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

629 Products
Show:
GRANIT Bolt set for 4th control unit
2%
GRANIT
Bolt set for 4th control unit
Technical data: 3x M8 x 280.
€62,53 €51,68 €61,28 €50,64
 
GRANIT Support
2%
GRANIT
Support
€1,46 €1,21 €1,43 €1,18
 
GRANIT Hinge pin rear screen hinge
2%
GRANIT
Hinge pin rear screen hinge
€3,78 €3,12 €3,70 €3,06
 
GRANIT Hinge pin for door screen
2%
GRANIT
Hinge pin for door screen
€12,35 €10,21 €12,10 €10,00
 
GRANIT Handle
2%
GRANIT
Handle
€38,42 €31,75 €37,65 €31,12
 
GRANIT Handle for rear screen
GRANIT
Handle for rear screen
€81,73 €67,55
 
GRANIT Clamp for Bowden cable
2%
GRANIT
Clamp for Bowden cable
€2,24 €1,85 €2,20 €1,82
 
GRANIT Support rear screen hinge
GRANIT
Support rear screen hinge
€10,17 €8,41
 
GRANIT Rubber washer window opener, side window
GRANIT
Rubber washer window opener, side window
€2,30 €1,90
 
GRANIT Push button insert
2%
GRANIT
Push button insert
€11,46 €9,47 €11,23 €9,28
 
GRANIT PVC support large
GRANIT
PVC support large
€4,32 €3,57
 
GRANIT Decorative moulding für Bodenmatte
2%
GRANIT
Decorative moulding für Bodenmatte
€19,00 €15,70 €18,62 €15,39
 
GRANIT Push rod
15%
GRANIT
Push rod
€502,88 €415,60 €427,45 €353,26
 
GRANIT Gaiter for lifting cylinder
2%
GRANIT
Gaiter for lifting cylinder
€81,20 €67,11 €79,58 €65,77
 
GRANIT Seal set for outer lifting cylinder Ø 28/70 mm
5%
GRANIT
Seal set for outer lifting cylinder Ø 28/70 mm
€169,27 €139,89 €160,81 €132,90
 
GRANIT Seal
2%
GRANIT
Seal
€28,34 €23,42 €27,77 €22,95
 
GRANIT Adjusting nut for lower link strut
2%
GRANIT
Adjusting nut for lower link strut
Dimensions: Thread = M22 x 2.5 mm.
€46,28 €38,25 €45,35 €37,48
 
GRANIT Adjusting nut for lower link strut
2%
GRANIT
Adjusting nut for lower link strut
€63,10 €52,15 €61,84 €51,11
 
GRANIT Angled screw for lower link strut
2%
GRANIT
Angled screw for lower link strut
Dimensions: Thread = M22 x 2.5 mm.
€58,32 €48,20 €57,15 €47,23
 
GRANIT Guide bar for lifting strut
2%
GRANIT
Guide bar for lifting strut
€16,86 €13,93 €16,52 €13,65
 
GRANIT Cover
2%
GRANIT
Cover
€17,02 €14,07 €16,68 €13,79
 
GRANIT Housing for lifting strut
15%
GRANIT
Housing for lifting strut
€372,68 €308,00 €316,78 €261,80
 
GRANIT Pin for lifting strut top
2%
GRANIT
Pin for lifting strut top
Dimensions: 20 x 100 mm.
€27,66 €22,86 €27,11 €22,41
 
GRANIT Pin for lower link support
2%
GRANIT
Pin for lower link support
Dimensions: 22 x 89 mm.
€28,39 €23,46 €27,82 €22,99
 
Showing 433 - 456 of 629

Fendt Farmer 309 (Typ 309) specs

Introduced in 1993 as part of Fendt's updated Farmer 300 series, the 309 (Typ 309) was built through to 2000. The Typ 309 designation separates it from the older 309 LSA (Typ 186), which stayed in production alongside it for a period. Four-wheel drive was the only available configuration. Compared to its predecessor, the tractor came with a redesigned cab offering a lower interior noise level of 72 dB, improved ventilation, and easier access. A higher injection pressure brought fuel consumption down by around 3%, and the oil change interval was set at 500 operating hours.

Engine

Power comes from an MWM TD 226 B-4, a water-cooled four-cylinder four-stroke turbocharged diesel with direct injection. Displacement is 4,155 cc, with a bore of 105 mm and a stroke of 120 mm. Output is 95 hp (70.8 kW) at 2,350 rpm, with a maximum torque of 375 Nm at 1,500 rpm. Fuel tank capacity is 107 litres.

Engine specs:

  • Type: MWM TD 226 B-4, water-cooled, four-stroke, four-cylinder turbodiesel, direct injection
  • Displacement: 4,155 cc
  • Bore x stroke: 105 x 120 mm
  • Power: 95 hp / 70.8 kW at 2,350 rpm
  • Max. torque: 375 Nm at 1,500 rpm
  • Fuel tank: 107 litres
  • Starter: electric, 12 V

Transmission and drivetrain

The standard gearbox is a fully synchronized 21/21 unit with electro-hydraulic reverser (EHS). A 21/6 version was available as an option, as was a super-creeper gearbox. Top speed is 40 km/h. The front and rear differential locks are both electro-hydraulically operated.

Hydraulics and three-point linkage

Hydraulic pump output is 74.9 litres per minute. Rear lift capacity at the three-point hitch is 4,957 kg. Standard equipment includes one single-acting and one double-acting control valve. A front hydraulic system was available as an option.

PTO

The rear PTO is independent and electro-hydraulically engaged, running at 540, 750, or 1,000 rpm. An optional front PTO at 1,000 rpm was also available, independent and electro-hydraulically operated.

Dimensions, weight and tyres

  • Length: 4,030 mm
  • Width: 2,140 mm
  • Height (with cab): 2,660 mm
  • Wheelbase: 2,260 mm
  • Front tread: 1,690 mm
  • Rear tread: 1,660 mm
  • Operating weight: 4,350 kg
  • Maximum permissible weight: 7,500 kg

Standard front tyres are 380/70 R24, rear 480/70 R34. A wide range of optional tyre sizes was available, including 420/70 R24 front with 520/70 R34 or 480/70 R38 rear.

Electrical system

  • System voltage: 12 V
  • Battery: 110 Ah
  • Alternator: 95 A
  • Starter: electric, 12 V

Cab

The 309 (Typ 309) came standard with an air-conditioned cab. Interior noise level was 72 dB. Optional extras included a front loader, front hydraulics, air brake system, additional control valves, and extra lighting.

Parts and brands for the Fendt Farmer 309 (Typ 309)

We stock a wide range of parts for the Fendt Farmer 309 (Typ 309), covering engine components, gasket sets, cooling and fuel system parts, hydraulics, brakes, cab parts, mudguards, and electrical components. Brands in our range include Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter, and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart