Web Analytics
Fendt Favorit 4 tractor parts & specs - Techniek Totaal
Menu
EUR

Tractor parts Fendt Favorit 4

Looking for parts for your Fendt Favorit 4 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

67 Products
Show:
GRANIT Main bearing Standard, Ø 65 mm
GRANIT
Dimensions: Ø 65 mm. More
Dimensions: Ø 65 mm.
€56,99 €47,10
GRANIT Connecting rod bush 32 mm
GRANIT
Dimensions: 32 mm. More
Dimensions: 32 mm.
€26,59 €21,98
GRANIT Connecting rod bolt
€28,89 €23,88
GRANIT Exhaust valve
€19,19 €15,86
GRANIT Piston ring set 4 rings, Ø 95 mm, 3 mm (trapezoid ring) / 3 mm / 3 mm / 5 mm
GRANIT
Dimensions: 4 rings, Ø 95 mm, 3 mm (trapezoidal ring) / 3 mm / 3 mm / 5 mm. More
Dimensions: 4 rings, Ø 95 mm, 3 mm (trapezoidal ring) / 3 mm / 3 mm /...
€56,89 €47,02
HELLA Rear light left with number plate light Fendt Farmer, Favorit
HELLA
To fit as: Fendt Farmer, Favorit More
To fit as: Fendt Farmer, Favorit
€28,29 €23,38
GRANIT Reflector Eicher
€2,79 €2,31
VICTOR REINZ Oil sump gasket
€65,39 €54,04
GRANIT Radiator hose thermostat pressure pipe
GRANIT
Inner Ø: 35 / 38 mm. Length: 60 mm. More
Inner Ø: 35 / 38 mm. Length: 60 mm.
€43,09 €35,61
GRANIT Radiator hose for cylinder head
GRANIT
Inner Ø: 22 mm. More
Inner Ø: 22 mm.
€7,59 €6,27
GRANIT Inlet valve
€13,89 €11,48
GRANIT Oil sump gasket 6-cylinder
€24,99 €20,65
GRANIT Piston set complete 4 rings, Ø 95 mm <b> gudgeon pin Ø 32 x 82 mm, combustion chamber Ø 57.2 mm, combustion chamber depth 17.5 mm
GRANIT
Dimensions: 4 rings, Ø 95 mm, Gudgeon pin Ø 32 x 82 mm, Combustion chamber Ø 57.2 mm, Combustion chamber depth 17.5 mm. Menke no.: 59639. Descripti... More
Dimensions: 4 rings, Ø 95 mm, Gudgeon pin Ø 32 x 82 mm, Combustion c...
€276,69 €228,67
GRANIT Gasket for oil filter head
€6,19 €5,12
HELLA Rear light right Eicher
HELLA
To fit as: Eicher 3021, 3022, 3024, 3026, 3028, 3030, 3655, 3656 More
To fit as: Eicher 3021, 3022, 3024, 3026, 3028, 3030, 3655, 3656
€28,29 €23,38
GRANIT Brake shoe hand brake Deutz 8006, 9006, 10006, 12006, 13006
GRANIT
To fit as: Deutz 8006, 9006, 10006, 12006, 13006 More
To fit as: Deutz 8006, 9006, 10006, 12006, 13006
€128,09 €105,86
GRANIT Flange bearing Standard, Ø 65 mm
GRANIT
Dimensions: Ø 65 mm. More
Dimensions: Ø 65 mm.
€204,39 €168,92
Showing 49 - 67 of 67

Fendt Favorit 4 specs and technical data

The Fendt Favorit 4 is one of the rarest tractors in the entire Favorit lineup. It was produced from 1966 to 1967 at the Fendt factory in Marktoberdorf, Germany, with a total production run of just 24 units. The tractor was available in both a 2WD and a 4WD version, with the 4WD variant proving popular for larger farming operations. Its successor, the Fendt Favorit 4S, followed in 1967 and was built through 1970 with a larger engine and several technical updates.

Engine specs

Power comes from a MWM D208.6 six-cylinder inline diesel engine, naturally aspirated and liquid-cooled, with direct injection. Displacement is 4.5 litres, with a bore and stroke of 95 x 105 mm. At a rated speed of 2,300 rpm, the engine produces 80 hp (59.7 kW). The electrical system runs on 12 volts with electric start. Fuel tank capacity is approximately 130 litres (34.3 gal).

The Favorit 4S that replaced it used a MWM D225-6 with 5.1 litres displacement and 90 hp, paired with a Bosch distributor injection pump and a two-circuit cooling system with groove thermostat.

Transmission and drivetrain

The Favorit 4 came with a choice of two gearbox configurations:

  • 16 forward / 8 reverse (fully synchronised)
  • 8 forward / 4 reverse

Steering on the 2WD version is manual; the 4WD variant came with power steering. The steering remained operational even with the engine off. Brakes are mechanical drum brakes. The 4WD drive system can be engaged and disengaged while moving.

Hydraulics and PTO

The rear hydraulic lift uses Fendt's automatic regulation system with a lifting capacity of around 2,600 kg at the lower link ends. The rear PTO runs at 540 or 1,000 rpm.

Dimensions and weights

  • Wheelbase: 261 cm (103 in)
  • Length: 435 cm (171 in)
  • Width: 217 cm (86 in)
  • Height: 183 cm (72 in)
  • Kerb weight 2WD: 3,685 kg
  • Kerb weight 4WD: 4,030 kg
  • Standard front tyres 2WD: 7.50-20
  • Standard rear tyres 2WD: 18.4-34
  • Standard front tyres 4WD: 11.2-24
  • Standard rear tyres 4WD: 18.4-34

The driver's seat is a saddle-style seat adjustable for weight and height, with a parallelogram-guided seat carrier, spring suspension, and hydraulic damping.

Parts and brands for the Fendt Favorit 4

We stock parts for the Fendt Favorit 4 and 4S covering engine components, cooling, fuel systems, brakes, hydraulics, electrics, and bodywork. Parts we carry come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter, and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart