Menu
EUR

Tractor parts Fendt Favorit 4

Looking for parts for your Fendt Favorit 4 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

86 parts found for Fendt Favorit 4
Show:
METARO Steering wheel ¯ 425 mm taper ¯ 22 mm with keyway tulip shape Eicher, MAN, Guldner
METARO
To fit as: Eicher, MAN, Güldner More
To fit as: Eicher, MAN, Güldner
€137,62 €113,74 €69,99 €57,84
You save 49%
GRANIT Thrust bearing single 60 x 96,5 x 27 mm
GRANIT
Dimensions (mm): 60 x 96.5 x 27 More
Dimensions (mm): 60 x 96.5 x 27
€94,66 €78,23
GRANIT Pilot bearing 40 x 68 x 15 mm Fendt Farmer 200 - 280, Favorit 4 - 614
GRANIT
Dimensions (mm): 40 x 68 x 15 More
Dimensions (mm): 40 x 68 x 15
€18,71 €15,46
GRANIT Connecting rod bush Ø 32 mm Fendt
GRANIT
Dimensions: 32 mm. More
Dimensions: 32 mm.
€27,64 €22,84 €27,09 €22,39
You save 2%
GRANIT Fuel filter outer-Ø 65 mm, inner-Ø 14 mm, height 120 mm
GRANIT
Dimensions (mm): Height: 120. More
Dimensions (mm): Height: 120.
€7,74 €6,40 €5,40 €4,46
You save 30%
GRANIT Cap steering wheel Ø 50 mm Hanomag Perfekt 301-401 E, Granit 501 E
GRANIT
To fit as: Hanomag Perfekt 301, 401, 401 E, Granit 501, 501 E, 500/1 More
To fit as: Hanomag Perfekt 301, 401, 401 E, Granit 501, 501 E, 500/1
€17,55 €14,50 €11,68 €9,65
You save 33%
GRANIT Hood catch round hood Fendt Fix, Farmer, Favorit
GRANIT
To fit as: Fendt Fix, Farmer, Favorit More
To fit as: Fendt Fix, Farmer, Favorit
€109,75 €90,70 €104,26 €86,17
You save 5%
GRANIT Clutch plate 310B organic, 26 x 32 mm, 10 splines Fendt
GRANIT
Material specifications: Organic clutch lining | Additional information: Made in Germany | Dimensions (mm): 26 x 32, 10 grooves More
Material specifications: Organic clutch lining | Additional informatio...
€387,02 €319,85
GRANIT Single clutch G 310 flywheel 36 mm Fendt, Steyr
GRANIT
Flywheel dimension (mm): 36 | Additional information: Made in Germany More
Flywheel dimension (mm): 36 | Additional information: Made in Germany
€605,10 €500,08
GRANIT Flame glow plug 9,5 V, 20 A, M20 x 1,5 Fendt
GRANIT
Version: 9.5 V, 20 A, Thread M20 x 1.5. To fit: Fendt. More
Version: 9.5 V, 20 A, Thread M20 x 1.5. To fit: Fendt.
€78,52 €64,89 €76,95 €63,60
You save 2%
GRANIT Single hydraulic pump 11,9 cm³/rpm., taper 1:5, Ø 17 x 17, left
GRANIT
Output volume: 11,9 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 99,8 mm. Direction of rotation: Anticlockwise. Line connection suction si... More
Output volume: 11,9 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 ...
€374,50 €309,50 €318,33 €263,08
You save 15%
GRANIT Brake shoe Hand brake 250 x 40 mm Deutz 8006-13006
GRANIT
To fit as: Deutz 8006, 9006, 10006, 12006, 13006 More
To fit as: Deutz 8006, 9006, 10006, 12006, 13006
€141,69 €117,10 €121,61 €100,50
You save 14%
LUK Thrust bearing with sleeve, without lubrication hole 57 x 100 x 56 mm
LUK
Dimensions (mm): 57 x 100 x 56 64.5 x 100 x 25 More
Dimensions (mm): 57 x 100 x 56 64.5 x 100 x 25
€311,93 €257,79 €304,96 €252,03
You save 2%
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
LUK
Dimensions (mm): 60 x 97 x 26 More
Dimensions (mm): 60 x 97 x 26
€126,81 €104,80 €123,98 €102,46
You save 2%
GRANIT Clutch plate 310 organic, 41 x 45 mm, 22 splines Fendt
GRANIT
Dimensions (mm): 41 x 45, 22 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 22 grooves | Material specifications: Organi...
€416,82 €344,48
GRANIT Thrust bearing 65 x 102 x 26 mm Case IH, Fendt, Porsche, Same, Schlüter
GRANIT
Dimensions (mm): 65 x 102 x 26 More
Dimensions (mm): 65 x 102 x 26
€37,60 €31,07
GRANIT Thrust bearing driving clutch 57 x 100 x 55,5 mm Fendt Farmer 2 - 312
GRANIT
Dimensions (mm): 57 x 100 x 55.5 More
Dimensions (mm): 57 x 100 x 55.5
€179,45 €148,31
GRANIT Master brake cylinder Ø 15,87 mm, DOT 4 Fendt Favorit 4S-12S, 610S-614S
€430,40 €355,70 €365,84 €302,35
You save 15%
GRANIT Radiator hose water pump suction pipe Ø 32/36 mm Fendt
GRANIT
Inner Ø: 32 / 36 mm. More
Inner Ø: 32 / 36 mm.
€22,11 €18,27 €21,67 €17,91
You save 2%
GRANIT Glow plug 9,5 V, 10 A, M14 x 1,25, pin 25 mm, total 102 mm
GRANIT
Version: 9.5 V, 10 A, thread M14 x 1.25, length of rod = 25 mm, total length = 102 mm. More
Version: 9.5 V, 10 A, thread M14 x 1.25, length of rod = 25 mm, total ...
€73,57 €60,80 €72,10 €59,59
You save 2%
GRANIT Reflector rectangular red, 130 x 42 mm Eicher, Güldner
€2,44 €2,02 €2,34 €1,93
You save 4%
LUK Thrust bearing 65 x 102 x 26 mm Fendt, Same
LUK
Dimensions (mm): 65 x 102 x 26 More
Dimensions (mm): 65 x 102 x 26
€120,49 €99,58 €117,81 €97,36
You save 2%
GRANIT Steering wheel Ø 425 mm metal spaken, taper Ø 22 mm Fendt, Hanomag
€110,96 €91,70 €108,47 €89,64
You save 2%
GRANIT Steering wheel Ø 425 mm, taper Ø 22 mm, tulip shape, with keyway
€110,96 €91,70 €108,47 €89,64
You save 2%
Showing 25 - 48 of 86

Fendt Favorit 4 specs and technical data

The Fendt Favorit 4 is one of the rarest tractors in the entire Favorit lineup. It was produced from 1966 to 1967 at the Fendt factory in Marktoberdorf, Germany, with a total production run of just 24 units. The tractor was available in both a 2WD and a 4WD version, with the 4WD variant proving popular for larger farming operations. Its successor, the Fendt Favorit 4S, followed in 1967 and was built through 1970 with a larger engine and several technical updates.

Engine specs

Power comes from a MWM D208.6 six-cylinder inline diesel engine, naturally aspirated and liquid-cooled, with direct injection. Displacement is 4.5 litres, with a bore and stroke of 95 x 105 mm. At a rated speed of 2,300 rpm, the engine produces 80 hp (59.7 kW). The electrical system runs on 12 volts with electric start. Fuel tank capacity is approximately 130 litres (34.3 gal).

The Favorit 4S that replaced it used a MWM D225-6 with 5.1 litres displacement and 90 hp, paired with a Bosch distributor injection pump and a two-circuit cooling system with groove thermostat.

Transmission and drivetrain

The Favorit 4 came with a choice of two gearbox configurations:

  • 16 forward / 8 reverse (fully synchronised)
  • 8 forward / 4 reverse

Steering on the 2WD version is manual; the 4WD variant came with power steering. The steering remained operational even with the engine off. Brakes are mechanical drum brakes. The 4WD drive system can be engaged and disengaged while moving.

Hydraulics and PTO

The rear hydraulic lift uses Fendt's automatic regulation system with a lifting capacity of around 2,600 kg at the lower link ends. The rear PTO runs at 540 or 1,000 rpm.

Dimensions and weights

  • Wheelbase: 261 cm (103 in)
  • Length: 435 cm (171 in)
  • Width: 217 cm (86 in)
  • Height: 183 cm (72 in)
  • Kerb weight 2WD: 3,685 kg
  • Kerb weight 4WD: 4,030 kg
  • Standard front tyres 2WD: 7.50-20
  • Standard rear tyres 2WD: 18.4-34
  • Standard front tyres 4WD: 11.2-24
  • Standard rear tyres 4WD: 18.4-34

The driver's seat is a saddle-style seat adjustable for weight and height, with a parallelogram-guided seat carrier, spring suspension, and hydraulic damping.

Parts and brands for the Fendt Favorit 4

We stock parts for the Fendt Favorit 4 and 4S covering engine components, cooling, fuel systems, brakes, hydraulics, electrics, and bodywork. Parts we carry come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter, and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart