Web Analytics
Fendt Favorit 509 (Typ 509) tractor parts & specs
Menu
EUR

Tractor parts Fendt Favorit 509 (Typ 509)

Looking for parts for your Fendt Favorit 509 (Typ 509) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

652 parts found for Fendt Favorit 509 (Typ 509)
Show:
GRANIT Seal lubrication line turbocharger Fendt
2%
GRANIT
Seal lubrication line turbocharger Fendt
€3,65 €3,02 €3,58 €2,96
 
GRANIT Seal kit ZKD 1,75 mm thick Case IH, Renault, Steyr, Fendt
5%
GRANIT
Seal kit ZKD 1,75 mm thick Case IH, Renault, Steyr, Fendt
€140,43 €116,06 €133,41 €110,26
 
GRANIT Hand throttle cable A 1695 mm, B 1480 mm Fendt
5%
GRANIT
Hand throttle cable A 1695 mm, B 1480 mm Fendt
A: 1695 mm. B: 1480 mm. Menke no.: 208404.
€105,75 €87,40 €100,46 €83,02
 
GRANIT O-ring thermostat Fendt
2%
GRANIT
O-ring thermostat Fendt
€2,18 €1,80 €2,14 €1,77
 
GRANIT Valve stem seal
2%
GRANIT
Valve stem seal
€2,77 €2,29 €2,71 €2,24
 
GRANIT Locking plate steering valve Fendt
2%
GRANIT
Locking plate steering valve Fendt
€14,71 €12,16 €14,42 €11,92
 
GRANIT Volume regulator Fendt, Deutz-Fahr
5%
GRANIT
Volume regulator Fendt, Deutz-Fahr
€169,05 €139,71 €160,60 €132,73
 
GRANIT Steering valve 5/4 manual operated 210 bar, 90 l/min, M22 x 1,5 Deutz
15%
GRANIT
Steering valve 5/4 manual operated 210 bar, 90 l/min, M22 x 1,5 Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow: min. 90 l/min., ...
€875,25 €723,35 €743,96 €614,84
 
GRANIT End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
5%
GRANIT
End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 80 l/m...
€213,41 €176,37 €202,74 €167,55
 
GRANIT Seal pump cover Fendt
2%
GRANIT
Seal pump cover Fendt
€7,20 €5,95 €7,06 €5,83
 
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Deutz-Fahr, Fendt
15%
Bosch/Rexroth
Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Deutz-Fahr, Fendt
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure ...
€330,94 €273,50 €281,30 €232,48
 
GRAMMER Tractor seat Maximo Professional MSG95AL/731 Fendt
GRAMMER
Tractor seat Maximo Professional MSG95AL/731 Fendt
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery type: Fabric....
€2.600,77 €2.149,40
 
GRANIT Base Fendt Farmer 240 S (Typ 294), Xylon 524
2%
GRANIT
Base Fendt Farmer 240 S (Typ 294), Xylon 524
€1,52 €1,26 €1,49 €1,23
 
GRANIT Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
2%
GRANIT
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€36,24 €29,95 €35,52 €29,36
 
GRANIT Push rod Fendt
15%
GRANIT
Push rod Fendt
€354,43 €292,92 €301,27 €248,98
 
GRANIT Breather filter oil tank Fendt
2%
GRANIT
Breather filter oil tank Fendt
€46,85 €38,72 €45,91 €37,94
 
GRANIT Piston rod Fendt Farmer 310-312, Favorit 509-515, Xylon 520-524
15%
GRANIT
Piston rod Fendt Farmer 310-312, Favorit 509-515, Xylon 520-524
€554,75 €458,47 €471,54 €389,70
 
GRANIT Seal kit outer lift cylinder Ø 80 mm Fendt
5%
GRANIT
Seal kit outer lift cylinder Ø 80 mm Fendt
€204,15 €168,72 €193,94 €160,28
 
GRANIT Seal Fendt Farmer 200-300
2%
GRANIT
Seal Fendt Farmer 200-300
€28,34 €23,42 €27,77 €22,95
 
GRANIT Nut for clevis lower Fendt
2%
GRANIT
Nut for clevis lower Fendt
€30,84 €25,49 €30,22 €24,98
 
GRANIT Graduated tube Fendt
5%
GRANIT
Graduated tube Fendt
€224,82 €185,80 €213,58 €176,51
 
GRANIT Joint Fendt Farmer 300, Favorit 500, GT 390, 395, Xylon 520-524
5%
GRANIT
Joint Fendt Farmer 300, Favorit 500, GT 390, 395, Xylon 520-524
€196,96 €162,78 €187,11 €154,64
 
GRANIT Strut yoke width 59,5 mm, length 250 mm Fendt
5%
GRANIT
Strut yoke width 59,5 mm, length 250 mm Fendt
€282,10 €233,14 €268,00 €221,49
 
Showing 577 - 600 of 652

Fendt Favorit 509 (Typ 509) specs

The Fendt Favorit 509 C is the entry-level model of the Favorit 500C series, which Fendt introduced in the autumn of 1993. The names Favorit 509 (Typ 509) and Favorit 509C (Typ 509) refer to the same model. The tractor was built from 1994 to 2000, with a total of 1,490 units produced during that period. Despite being the smallest model in the series, its technical specification closely matched that of the much heavier Fendt 800 series. The 509 C was designed as a versatile tractor suitable for ploughing, harvesting, loading and transport work.

Engine and power

Under the hood sits an MWM four-cylinder turbodiesel, type TD 226 B-4, with a displacement of 4,156 cc. Engine output is 95 hp (70.8 kW) at 2,100 rpm. Maximum torque is 381 Nm at 1,500 rpm. Fuel delivery is handled by a Bosch VE distributor pump with automatic advance and multi-hole injectors. Maximum injection pressure is 850 bar. Further features include overhead valves, pressure lubrication, piston crown cooling and a gear-driven camshaft. Cooling is handled by a thermostatically controlled dual-circuit system with a viscous fan coupling and exhaust turbocharger. The constant power range runs between 1,900 and 2,400 rpm, and an oil change is only required after 500 operating hours. The fuel tank holds 135 litres.

Transmission

The 509 C uses a ZF 7200 Turboshift gearbox, a fully synchronised unit with four-speed powershift and electro-hydraulic reverser operated by a single lever. The gearbox offers 44 forward and 44 reverse gears, consisting of 24 working gears and 20 creep gears. A notable feature is the Voith fluid coupling (type 390 TD-F), positioned ahead of the wet multi-disc clutch. This hydraulic coupling smooths out power delivery and protects the drivetrain from shock loads. Direction changes can be made without depressing the clutch, thanks to the synchronised reverser with preselect function. Standard top speed is 40 km/h, with an optional increase to 50 km/h.

Hydraulics and PTO

  • Hydraulic pump: closed system with a flow rate of 101.8 litres per minute
  • Rear three-point hitch lift capacity: 5,508 kg (category II/III)
  • Control: lower-link draft sensing
  • Rear PTO: independent, electro-hydraulic, 540/750/1000/1400 rpm
  • Front PTO: independent, optional, 1000 rpm
  • Front and rear differential lock: electro-hydraulic

Dimensions, weight and tyres

The operating weight of the tractor is 4,970 kg. Wheelbase is 233 cm. Standard tyre sizes are 420/70R24 front and 480/70R38 rear, though 18.4 R38 rear was also used. The electrical system runs on 12 volts with a 110 Ah battery and alternator charging.

Cab

The cab of the 509 C was at launch nearly identical to that of the Farmer 300 series, with a noise level of 72 dB(A). In 1995 the cab comfort was upgraded. Heating was standard, air conditioning was optional. The cab was fitted with a sprung suspension mounting.

Parts and brands for the Fendt Favorit 509 C

We supply parts for the Fendt Favorit 509 C, for both routine maintenance and full restoration. This covers engine parts, cooling components, exhaust systems, fuel filters, hydraulic components, brakes, electrics and cab parts. The parts we supply come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart