Menu
EUR

Tractor parts Fendt Favorit 612 (Typ 383)

Looking for parts for your Fendt Favorit 612 (Typ 383) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

501 parts found for Fendt Favorit 612 (Typ 383)
Show:
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.231,99 €1.018,17 €1.042,65 €861,69
You save 15%
GRANIT Spring plate fender Fendt
€9,41 €7,78 €9,22 €7,62
You save 2%
GRANIT Potentiometer rotary function control panel hydraulics
GRANIT
Version: For control unit - hydraulics. Menke no.: 209776. More
Version: For control unit - hydraulics. Menke no.: 209776.
€148,47 €122,70
GRANIT Symbol work light yellow
GRANIT
Version: Yellow, rear work light. More
Version: Yellow, rear work light.
€2,57 €2,12 €2,52 €2,08
You save 2%
GRANIT Lichtleiste zweifach 2 fields, 12 V, bulb BA7, thicknesses 2,5 - 4,5 mm
GRANIT
Version: Operating voltage: 12 V, Illumination: incandescent lamp BA7, Ambient temperature: +80°C / -40°C, Surface: grained, Illuminated fields: 2 f... More
Version: Operating voltage: 12 V, Illumination: incandescent lamp BA7,...
€13,59 €11,23 €13,32 €11,01
You save 2%
GRANIT Push button switch fan 12 / 24 V, button yellow, Ø 30 mm
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€45,75 €37,81 €44,84 €37,06
You save 2%
GRANIT Rotary switch heating, fan, black button, 5 connections
GRANIT
Version: For heater, blower, With 5 blade terminals. More
Version: For heater, blower, With 5 blade terminals.
€76,10 €62,89 €74,58 €61,64
You save 2%
GRANIT Push button switch marker-/parking light 12/24 V, button yellow
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€39,03 €32,26 €38,25 €31,61
You save 2%
SACEX Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
SACEX
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 128 mm. Total height: 204 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€40,90 €33,80 €40,08 €33,12
You save 2%
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 154 x 128 x 77 mm
HELLA
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 154 x 128 x 77 mm. Installation location: Universal. Prote... More
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. ...
€42,96 €35,50 €42,10 €34,79
You save 2%
GRANIT Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
GRANIT
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm. Material: Plastic. More
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole...
€5,30 €4,38 €5,19 €4,29
You save 2%
GRANIT Tail light holder
€75,13 €62,09 €73,63 €60,85
You save 2%
GRANIT Pipe RKLE
€97,77 €80,80 €95,81 €79,18
You save 2%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€36,91 €30,50 €36,17 €29,89
You save 2%
GRANIT Cover
€55,54 €45,90 €54,43 €44,98
You save 2%
HELLA Work lamp flood beam H3, 12 / 24 V, 35 / 70 W, square, mounting, bolted
HELLA
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: • Housing: plastic • Diffusing lens: glass. Dimensions W x H x D: 154 x 94 x 11... More
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: •...
€54,33 €44,90 €53,24 €44,00
You save 2%
Cobo Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
Cobo
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Nominal voltage: 12 V. Power consumption: 55 W. Mounting size: 117 mm. Bulbs incl... More
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. N...
€94,68 €78,25 €92,79 €76,69
You save 2%
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€8,53 €7,05 €8,36 €6,91
You save 2%
HELLA Glass rear light right, 3 light functions, lamp P21W, R10W
HELLA
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850V, 1140F, 1640F, 1840F, 1850F, 1950F, 2250F, 2650F, 1550, 1640, 1750, 1840, 1850... More
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850...
€19,63 €16,22 €16,61 €13,73
You save 15%
GRANIT Seal feed pump
GRANIT
To fit as: Deutz DX 140, 145, 160 More
To fit as: Deutz DX 140, 145, 160
€2,42 €2,00
Set of parts filter glass Ø 29/35 x 53 mm
Ø: 29/35 mm. Height: 33 mm. More
Ø: 29/35 mm. Height: 33 mm.
€10,38 €8,58 €6,98 €5,77
You save 33%
Stabilus Windshield frame shock absorber 250 N, 600,5 mm, stroke 252,5 mm Fendt
Stabilus
To fit as: Fendt Windscreen More
To fit as: Fendt Windscreen
€40,92 €33,82 €40,10 €33,14
You save 2%
GRANIT Top link ball cat. 3 Ø 59 mm Fendt
GRANIT
Tractor types: Fendt Farmer 409, 410, 411, 412. Fendt Farmer 600, 610, 612, 614, 615, 711, 712, 714, 716, 816, 818, 822, 824, 916, 920, 924, 926. Fend... More
Tractor types: Fendt Farmer 409, 410, 411, 412. Fendt Farmer 600, 610,...
€33,48 €27,67 €32,81 €27,12
You save 2%
GRANIT Thrust bearing 60 x 104 x 93 mm Fendt Favorit 611 - 615
GRANIT
Dimensions (mm): 60 x 104 x 93 More
Dimensions (mm): 60 x 104 x 93
€411,41 €340,01
Showing 313 - 336 of 501

Fendt Favorit 612 (Typ 383) specifications

The Fendt Favorit 612 LSA carries the internal type designation T 383 and was built from 1983 to 1993. Within the Favorit 600 series, the 612 occupies a particular position: it was the only model that had been delivered exclusively with four-wheel drive since its introduction in 1968. A rear-wheel drive version only became available in 1974, but the LSA series under Typ 383 was always built exclusively with four-wheel drive. The LS version with rear-wheel drive falls under Typ FWA 283.

There are two production phases. The first (chassis number T 383.210, 1983 to 1987) covers 1,448 units with 135 hp. The second phase (chassis number T 383.211, 1988 to 1993) covers 1,589 units with 145 hp. In 1987, Fendt introduced the Duospeed drive system and the electronically controlled differential lock on the revised 612 LSA. An optional on-board computer was available for processing and storing operational data.

Engine

The Favorit 612 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. The engine is fitted with Rotocap valves, ring carrier pistons, piston crown cooling, a dry air filter with pre-cleaner, an inline injection pump with governor, a multi-hole injector, an oil cooler, a seven-bearing crankshaft, a gear-driven camshaft, a viscous fan, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,234 cc in the first phase and 6,240 cc in the second phase.

In the first production phase (1983 to 1987), the engine produces 135 hp. In the second phase (1988 to 1993), output was increased to 145 hp. The torque converter increases torque by up to 30 percent. The lock-up clutch connects engine and gearbox depending on load at 1,600 to 1,900 rpm, reducing or eliminating the need to change gear under load.

Transmission and travel speed

The 612 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox type T 3450 with side-mounted gear selection. The change gearbox has six normal gears and four creep gears. The fine-step section has three positions: slow, fast and reverse. In reverse, sixth gear is locked out. Top speed is 40 km/h in the standard version. There was also an extremely rare 50 km/h version with a modified final drive, achieving approximately 45 km/h in practice. From 1987, the Duospeed gearbox was available, enabling a continuously variable drive range with four power levels.

The main gearbox has four pre-selectable speed ranges: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute. Maximum lift capacity of the rear three-point hitch is 6,000 kg. The permissible front axle load is 4,000 kg and the rear axle load 6,000 kg.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes, drive and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft brake acting as a disc brake operates on the four-wheel drive. When the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. The front planetary oscillating axle has an oscillation angle of up to 12 degrees. The rear axle features an electronically controlled differential lock that can be engaged automatically. Steering is hydrostatically assisted.

Dimensions and weight

  • Length: 470 cm
  • Width: 238 cm
  • Height: 289 cm
  • Turning radius: 5.7 m
  • Unladen weight: 6,315 kg
  • Fuel tank: 222 litres

Standard tyre sizes are 16.9-26 at the front and 18.4R38 or 20.8R38 at the rear depending on the version.

Difference from the 612 LS (Typ 283)

A point that regularly comes up is the difference between Typ 383 and Typ 283. The Typ 283 is the LS series with rear-wheel drive and a ZF T 3445 gearbox. The Typ 383 has four-wheel drive as standard, a slightly differently configured ZF T 3450 gearbox, a higher hydraulic pump output and higher permissible axle loads. In addition, the Typ 383 received the Duospeed drive system and the electronically controlled differential lock in its second phase, which the Typ 283 does not have.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart