Web Analytics
Fendt Favorit 612 (Typ 383) tractor parts & specs
Menu
EUR

Tractor parts Fendt Favorit 612 (Typ 383)

Looking for parts for your Fendt Favorit 612 (Typ 383) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

409 Products
Show:
GRANIT Bolt set
GRANIT
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€21,53 €17,79 €21,10 €17,44
You save 2%
GRANIT Bolt set
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€11,52 €9,52 €11,29 €9,33
You save 2%
GRANIT Hinge part for door, except for: Favorit 610
€11,50 €9,50 €11,27 €9,31
You save 2%
GRANIT Window handle for windscreen
GRANIT
Description: for windshield. More
Description: for windshield.
€27,26 €22,53 €26,71 €22,07
You save 2%
GRANIT Sealing washer for openable window, right and left
€7,02 €5,80 €6,88 €5,69
You save 2%
GRANIT Bar
€22,99 €19,00 €22,53 €18,62
You save 2%
GRANIT Ventilation valve
GRANIT
A: 83 mm. B: 44 mm. C: M42 x 2 mm. D: 78 mm. E: 65 mm. Volume: 0,00055 m³. F: 46 mm. More
A: 83 mm. B: 44 mm. C: M42 x 2 mm. D: 78 mm. E: 65 mm. Volume: 0,00055...
€64,11 €52,98 €62,83 €51,93
You save 2%
GRANIT Seal kit for outer lifting cylinder Ø 80 mm
€105,00 €86,78 €99,75 €82,44
You save 5%
GRANIT Pipe for lifting strut
€316,29 €261,40 €268,85 €222,19
You save 15%
GRANIT Gas strut
GRANIT
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: windscreen. Menke no.: 54807. More
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 ...
€36,40 €30,08 €35,67 €29,48
You save 2%
GRANIT Guide ring
€6,15 €5,08 €6,03 €4,98
You save 2%
GRANIT Plug 9 mm
€24,08 €19,90 €23,60 €19,50
You save 2%
GRANIT Switch
GRANIT
Version: Pedal contact. More
Version: Pedal contact.
€60,55 €50,04
HELLA Rocker switch For air conditioning
HELLA
Version: Rocker operation: on/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 blade terminals. More
Version: Rocker operation: on/off switch, 12 V/24 V, power rating: 16 ...
€29,98 €24,78
GRANIT Push button switch Blower
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€43,89 €36,27 €43,01 €35,55
You save 2%
GRANIT Socket with blade connection
€11,68 €9,65 €11,45 €9,46
You save 2%
HELLA Reflectors - Colour: Yellow, Total Ø: 60 mm
HELLA
Colour: Yellow | Total Ø (mm): 60 | Additional information: 22 cm² effective reflecting surface More
Colour: Yellow | Total Ø (mm): 60 | Additional information: 22 cm² e...
€2,25 €1,86 €1,91 €1,58
You save 15%
GRANIT Reflectors - Colour: Yellow, Hole Ø: 5.2 mm, Total Ø: 61 mm
GRANIT
Colour: Yellow | Hole Ø (mm): 5.2 | Total Ø (mm): 61 More
Colour: Yellow | Hole Ø (mm): 5.2 | Total Ø (mm): 61
€1,51 €1,25 €1,48 €1,22
You save 2%
Cobo Work light
Cobo
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Dimensions W x H x D: 178 x 86 x 73 mm. Nominal voltage: 12 / 24 V. Cable length: 250 mm. Pow... More
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Dimensions W ...
€54,63 €45,15 €53,54 €44,25
You save 2%
HELLA Headlight insert Left and right
HELLA
Bulb: H4. To fit: 4551GA 004109021. Installation location: Left/right. Nominal voltage: 12 / 24 V. Test mark: E1 34463, ECE. Light function: With dipp... More
Bulb: H4. To fit: 4551GA 004109021. Installation location: Left/right....
€66,43 €54,90 €65,10 €53,80
You save 2%
GRANIT Reflectors
GRANIT
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm. Material: Plastic. More
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole...
€5,12 €4,23 €5,02 €4,15
You save 2%
GRANIT Multifunction relay changeover
GRANIT
Version: 12 V / 30- 40 A, Without holder, 5-pin, flat plug connection 6.3 mm, With resistor for suppressing inductive interference voltage peaks. Colo... More
Version: 12 V / 30- 40 A, Without holder, 5-pin, flat plug connection ...
€4,09 €3,38 €4,01 €3,31
You save 2%
GRANIT Brake shoe McCORMICK / IHC 1246, 1255, 1455
GRANIT
To fit as: McCORMICK / IHC 1246, 1255, 1455 More
To fit as: McCORMICK / IHC 1246, 1255, 1455
€175,63 €145,15 €166,85 €137,89
You save 5%
GRANIT Universal joint Maintenance-free
GRANIT
A: 35 mm. B: 94,92 mm. Size: 94,92 x 94,92 x 35. Universal joint size: . Lubrication system: Maintenance-free. More
A: 35 mm. B: 94,92 mm. Size: 94,92 x 94,92 x 35. Universal joint size:...
€162,76 €134,51 €154,62 €127,79
You save 5%
Showing 337 - 360 of 409

Fendt Favorit 612 (Typ 383) specifications

The Fendt Favorit 612 LSA carries the internal type designation T 383 and was built from 1983 to 1993. Within the Favorit 600 series, the 612 occupies a particular position: it was the only model that had been delivered exclusively with four-wheel drive since its introduction in 1968. A rear-wheel drive version only became available in 1974, but the LSA series under Typ 383 was always built exclusively with four-wheel drive. The LS version with rear-wheel drive falls under Typ FWA 283.

There are two production phases. The first (chassis number T 383.210, 1983 to 1987) covers 1,448 units with 135 hp. The second phase (chassis number T 383.211, 1988 to 1993) covers 1,589 units with 145 hp. In 1987, Fendt introduced the Duospeed drive system and the electronically controlled differential lock on the revised 612 LSA. An optional on-board computer was available for processing and storing operational data.

Engine

The Favorit 612 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. The engine is fitted with Rotocap valves, ring carrier pistons, piston crown cooling, a dry air filter with pre-cleaner, an inline injection pump with governor, a multi-hole injector, an oil cooler, a seven-bearing crankshaft, a gear-driven camshaft, a viscous fan, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,234 cc in the first phase and 6,240 cc in the second phase.

In the first production phase (1983 to 1987), the engine produces 135 hp. In the second phase (1988 to 1993), output was increased to 145 hp. The torque converter increases torque by up to 30 percent. The lock-up clutch connects engine and gearbox depending on load at 1,600 to 1,900 rpm, reducing or eliminating the need to change gear under load.

Transmission and travel speed

The 612 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox type T 3450 with side-mounted gear selection. The change gearbox has six normal gears and four creep gears. The fine-step section has three positions: slow, fast and reverse. In reverse, sixth gear is locked out. Top speed is 40 km/h in the standard version. There was also an extremely rare 50 km/h version with a modified final drive, achieving approximately 45 km/h in practice. From 1987, the Duospeed gearbox was available, enabling a continuously variable drive range with four power levels.

The main gearbox has four pre-selectable speed ranges: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute. Maximum lift capacity of the rear three-point hitch is 6,000 kg. The permissible front axle load is 4,000 kg and the rear axle load 6,000 kg.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes, drive and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft brake acting as a disc brake operates on the four-wheel drive. When the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. The front planetary oscillating axle has an oscillation angle of up to 12 degrees. The rear axle features an electronically controlled differential lock that can be engaged automatically. Steering is hydrostatically assisted.

Dimensions and weight

  • Length: 470 cm
  • Width: 238 cm
  • Height: 289 cm
  • Turning radius: 5.7 m
  • Unladen weight: 6,315 kg
  • Fuel tank: 222 litres

Standard tyre sizes are 16.9-26 at the front and 18.4R38 or 20.8R38 at the rear depending on the version.

Difference from the 612 LS (Typ 283)

A point that regularly comes up is the difference between Typ 383 and Typ 283. The Typ 283 is the LS series with rear-wheel drive and a ZF T 3445 gearbox. The Typ 383 has four-wheel drive as standard, a slightly differently configured ZF T 3450 gearbox, a higher hydraulic pump output and higher permissible axle loads. In addition, the Typ 383 received the Duospeed drive system and the electronically controlled differential lock in its second phase, which the Typ 283 does not have.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart