Web Analytics
Fendt Favorit 615 (Typ 385) tractor parts & specs
Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

402 Products
Show:
GRANIT Bracket
€21,15 €17,48
GRANIT Hose For lubrication line
€44,59 €36,85 €43,70 €36,12
You save 2%
GRANIT Hose for air filter
GRANIT
Inner Ø: 100 mm. Length: 75 mm. More
Inner Ø: 100 mm. Length: 75 mm.
€101,99 €84,29 €96,89 €80,07
You save 5%
GRANIT Gasket For oil return line
€4,09 €3,38 €4,01 €3,31
You save 2%
GRANIT Gasket from exhaust manifold to turbocharger
€61,60 €50,91 €60,37 €49,89
You save 2%
GRANIT Valve spring inner
€18,97 €15,68 €18,59 €15,36
You save 2%
GRANIT Connecting rod bolt
€28,85 €23,84 €28,27 €23,36
You save 2%
GRANIT O-ring
€2,12 €1,75 €2,08 €1,72
You save 2%
GRANIT Oil sump gasket
€28,11 €23,23 €27,55 €22,77
You save 2%
GRANIT O-ring
GRANIT
Dimensions: 25 x 4 mm. More
Dimensions: 25 x 4 mm.
€3,93 €3,25 €3,85 €3,18
You save 2%
GRANIT O-ring for liner, top
€10,41 €8,60 €10,20 €8,43
You save 2%
GRANIT Gasket set
€53,71 €44,39 €52,64 €43,50
You save 2%
GRANIT Return line
€222,53 €183,91 €211,40 €174,71
You save 5%
GRANIT Bearing block for gas damper attachment on the roof hatch
€48,30 €39,92 €47,33 €39,12
You save 2%
GRANIT Compression spring for rear screen handle
€2,18 €1,80 €2,14 €1,77
You save 2%
GRANIT Spacer tube
GRANIT
A: 15 mm. B: 10 mm. C: 13,6 mm. More
A: 15 mm. B: 10 mm. C: 13,6 mm.
€1,72 €1,42 €1,69 €1,40
You save 2%
GRANIT Spindle for lifting strut
GRANIT
Dimensions: Length = 300, Thread = M28 x 2 mm. More
Dimensions: Length = 300, Thread = M28 x 2 mm.
€160,40 €132,56 €152,38 €125,93
You save 5%
GRANIT Angled screw for lower link strut
GRANIT
Dimensions: Thread = M27 x 3 mm. More
Dimensions: Thread = M27 x 3 mm.
€74,05 €61,20 €72,57 €59,98
You save 2%
GRANIT Replacement glass, main mirror
€36,72 €30,35 €35,99 €29,74
You save 2%
GRANIT Guide bar for lifting strut
€16,86 €13,93 €16,52 €13,65
You save 2%
GRANIT Gas strut
GRANIT
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: windscreen. Menke no.: 54807. More
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 ...
€36,40 €30,08 €35,67 €29,48
You save 2%
GRANIT Clamp lock
€14,40 €11,90 €14,11 €11,66
You save 2%
GRANIT Strut right
GRANIT
Version: 28" tyres. Installation location: rechts. More
Version: 28" tyres. Installation location: rechts.
€393,99 €325,61 €334,89 €276,77
You save 15%
GRANIT Pin for top link
GRANIT
Dimensions: 25.4 x 140 mm. More
Dimensions: 25.4 x 140 mm.
€45,18 €37,34 €44,28 €36,60
You save 2%
Showing 265 - 288 of 402

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart