Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

535 parts found for Fendt Favorit 615 (Typ 385)
Show:
Mirror 260 x 148 mm, unheated, right / left, rod-Ø 13 mm
Dimensions: 260 x 148 mm. Height: 260 mm. Width: 148 mm. Radius of curvature: 1400 mm. Version: Unheated. Installation location: Right/left. Material:... More
Dimensions: 260 x 148 mm. Height: 260 mm. Width: 148 mm. Radius of cur...
€104,95 €86,74 €96,55 €79,80
You save 8%
Guide ring hood Fendt
Potentiometer rotary function control panel hydraulics
Version: For control unit - hydraulics. Menke no.: 209776. More
Version: For control unit - hydraulics. Menke no.: 209776.
€146,43 €121,01
VDO Seal for tank sensor
€17,45 €14,42
Push button switch intermittent wipers 12 / 24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (S1- S- 01- 0), Dustproof and splashproof. Menke no.: 80855. More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€33,84 €27,97 €31,13 €25,73
You save 8%
Push button switch headlight 12 / 24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (31- S1- S2- S- +), Dustproof and splashproof, With glass socket bul... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminal...
€44,31 €36,62 €40,77 €33,69
You save 8%
Push button switch marker-/parking light 12/24 V, button yellow
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€40,73 €33,66 €37,47 €30,97
You save 8%
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching function: on/off switch with silver contacts/with splash protection cap/spr... More
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switc...
€6,45 €5,33
Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm. Material: Plastic. More
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole...
€6,91 €5,71
Replacement cover beacon
€34,56 €28,56 €31,80 €26,28
You save 8%
Beacon H1 Quasarino orange 12 V, Ø 130 mm, 204 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 130 mm. Total height: 204 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€43,89 €36,27 €40,38 €33,37
You save 8%
HELLA Work lamp flood beam H3, 12 / 24 V, 55 / 70 W, upright / hanging
HELLA
Bulb: H3. Connection: AMP plug. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 180 x 125 x 120 mm. Installation loc... More
Bulb: H3. Connection: AMP plug. Form: Rectangular. Material: Housing: ...
€104,67 €86,50 €100,80 €83,31
You save 4%
Cobo Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
Cobo
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Nominal voltage: 12 V. Power consumption: 55 W. Mounting size: 117 mm. Bulbs incl... More
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. N...
€98,80 €81,65 €90,90 €75,12
You save 8%
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€11,13 €9,19
Reflectors yellow Ø 60 mm, bore Ø 6,0 mm - 10 pieces
Colour: Yellow | Hole Ø (mm): 6.0 | Total Ø (mm): 60 | Additional information: With impact-resistant plastic base More
Colour: Yellow | Hole Ø (mm): 6.0 | Total Ø (mm): 60 | Additional in...
€25,18 €20,81
Mirror and left 375 x 183 x 26 mm, rod Ø 14 - 20 mm Fendt
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 270P, 275S, 280P, 304, 305, 306, 307, 308, 309, 310, 311, 312, GT 345, 360, 365, ... More
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 2...
€54,04 €44,66 €49,72 €41,09
You save 8%
Brake shoe Foot brake 270 x 80 mm McCORMICK, IHC 1246-1455
To fit as: McCORMICK / IHC 1246, 1255, 1455 More
To fit as: McCORMICK / IHC 1246, 1255, 1455
€196,09 €162,06 €180,40 €149,09
You save 8%
Cap for connector head yellow
Version: Yellow. More
Version: Yellow.
€17,56 €14,51
Banjo bolt M10 x 1, length 23 mm, wrench size 13 mm Fendt
Medium: DOT4. Total length: 23 mm. Thread: M10x1. AF: 13 mm. Thread length: 8 mm. More
Medium: DOT4. Total length: 23 mm. Thread: M10x1. AF: 13 mm. Thread le...
€17,89 €14,78
Accessory set brake caliper Fendt
€68,57 €56,67 €63,08 €52,14
You save 8%
KS Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD 226.B
KS
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm. More
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€133,08 €109,98 €122,43 €101,18
You save 8%
Cover Fendt
€21,75 €17,98
Collet set Fendt
Inlet valve Fendt Farmer 304LS-310LSA, Favorit 509-615LSA
€44,03 €36,39 €40,51 €33,48
You save 8%
Connecting rod bearing standard, Ø 63 mm Fendt
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€34,47 €28,49 €31,71 €26,21
You save 8%
Angle Fendt Favorit 600-615
Tappet head-Ø 31 mm, shank-Ø 17,5 mm Fendt
Head Ø: 31 mm. Shaft Ø: 17,5 mm. More
Head Ø: 31 mm. Shaft Ø: 17,5 mm.
€42,49 €35,12 €39,09 €32,31
You save 8%
Washers M14
€8,98 €7,42
Disc cylinder head Fendt
Exhaust manifold gasket to the turbocharger Fendt
€66,86 €55,26 €61,51 €50,84
You save 8%
Screenwash system tank Fendt Farmer 240 S (Typ 294), GT 395
€64,96 €53,69 €59,76 €49,39
You save 8%
Replacement glass, main mirror 363 x 175 x 3 mm, heated, right / left
Dimensions: 363 x 175 x 3 mm. Version: Heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. To fit: MAN F8/F9. Applicat... More
Dimensions: 363 x 175 x 3 mm. Version: Heated. Installation location: ...
€70,47 €58,24 €64,83 €53,58
You save 8%
ROCKINGER Drawbar without sensor rail 311 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 84,3 kN. Colour: Black. Descript... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.143,32 €944,89 €880,91 €728,02
You save 23%
Brake light switch pedal contact
Version: Pedal contact. More
Version: Pedal contact.
€62,09 €51,31
Showing 481 - 528 of 535

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart