Menu
EUR

Ford 6810 tractor parts & technical data

Replacing lights or repairing the electrics on your Ford 6810? With more than 190 parts for this model, trailer couplings included, the right part is here.

193 parts found for Ford 6810
Show:
LED headlight dipped beam / main beam 12 / 24 V, 140 x 140 x 88 mm
5%
LED headlight dipped beam / main beam 12 / 24 V, 140 x 140 x 88 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€123,64 €102,18 €117,45 €97,07
 
Lift rod left with lower link 950 mm Ford 5110 - 8210
5%
Lift rod left with lower link 950 mm Ford 5110 - 8210
Version: left with lower link 950 mm
€153,43 €126,80 €145,75 €120,45
 
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 92 mm
20%
HELLA
Starter motor 12 V, 3,1 kW, 10 teeth, Ø 92 mm
€505,53 €417,79 €406,40 €335,87
 
Bush bridge body Ø 135 x 125 mm, length 42 mm
5%
Bush bridge body Ø 135 x 125 mm, length 42 mm
€72,03 €59,53 €68,40 €56,53
 
PTO shaft end piece 1 3/8" 21 spline, 1000 rpm Ford, Fiat
5%
PTO shaft end piece 1 3/8" 21 spline, 1000 rpm Ford, Fiat
Version: 1000 rpm, 1 3/8" 21 splines.
€212,43 €175,56 €201,80 €166,78
 
Heating element engine preheater Ford, Fiat, New Holland
5%
Heating element engine preheater Ford, Fiat, New Holland
€218,53 €180,60 €207,60 €171,57
 
GRANIT Radiator cap Ø 58 mm, height 25,5 mm
GRANIT
Radiator cap Ø 58 mm, height 25,5 mm
Neck Ø: 58 mm. Height: 25,5 mm.
€15,30 €12,64
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€32,40 €26,78
 
GRANIT Exhaust manifold gasket to the turbocharger
GRANIT
Exhaust manifold gasket to the turbocharger
€13,35 €11,03
 
GRANIT Gasket exhaust New Holland, Ford, Fiat
GRANIT
Gasket exhaust New Holland, Ford, Fiat
€10,95 €9,05
 
Eaton Internal plate transmission Ford, New Holland, 142 g
5%
Eaton
Internal plate transmission Ford, New Holland, 142 g
Reference no.: E0NN7Z031AA
€53,91 €44,55 €51,20 €42,31
 
Seal front axle 150 x 176 x 15,5/16 mm Case IH, Ford
5%
Seal front axle 150 x 176 x 15,5/16 mm Case IH, Ford
€57,62 €47,62 €54,70 €45,21
 
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
 
Tank cap thread 49 mm
Tank cap thread 49 mm
Version: Thread: 49 mm.
€19,90 €16,45
 
Radiator cap Ø 58 mm, height 25 mm, 0,7 bar
Radiator cap Ø 58 mm, height 25 mm, 0,7 bar
Neck Ø: 58 mm. Height: 25 mm. Opening pressure: 0,7 bar.
€9,45 €7,81
 
Water pump with pulley and gasket Ford 2000-7710
5%
Water pump with pulley and gasket Ford 2000-7710
Reference no.: S.65016.
€120,37 €99,48 €114,35 €94,50
 
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
5%
GRAMMER
Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. ...
€1.078,71 €891,50 €1.024,75 €846,90
 
GRANIT Temperature sensor 12 V, 5/8" UNF
GRANIT
Temperature sensor 12 V, 5/8" UNF
Version: Thread: 5/8" UNF. Thread: 5/8" UNF. Temperature: - °C.
€13,70 €11,32
 
Stop cable 1300 / 1230 mm Ford 3910-7710
Stop cable 1300 / 1230 mm Ford 3910-7710
To fit as: Ford 4100, 5100, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 3610, 3910...
€24,85 €20,54
 
Showing 25 - 48 of 193

Ford 6810 tractor parts for engine, clutch and steering

Plenty of farms still use a Ford 6810 every day, even though the hour meter on a typical example shows a serious number by now. With a tractor like that, it all comes down to the parts that wear: seals, the clutch, the steering and the starting system. Here you will find more than 190 Ford 6810 parts, from GRANIT, Eaton, LUK, Cobo and GRAMMER.

Engine and fuel side

For the engine there are sealing rings for the injection nozzles, exhaust gaskets and water pump gaskets. You will also find engine oil filters, V-belts and turbochargers. A tank cap looks like a minor item, but one that no longer seals lets dirt and moisture into the diesel, and the injectors pay for that later.

Whenever you pull an injector, always renew the sealing washer underneath it. A used washer has been crushed and no longer seals properly, which leads to blow-by and soot building up around the nozzle. Clean the seat thoroughly before the new washer goes in.

Fitting a turbocharger is a job where cleanliness counts. Flush or replace the oil feed line, change the engine oil and filter, and prime the new turbo with a little clean oil before the first start. Let the engine idle for a while before you open the throttle.

Driveline and clutch

The driveline is covered with clutch plates, universal joints and bushes for the transmission housing. If the clutch slips under load or will not disengage cleanly, the plate is usually worn. While it is apart, inspect the flywheel face and the release bearing as well.

Steering and drawbar

The front axle of a 6810 takes a beating in the yard and in the field. Axial joints and ball joints take the play out of the steering. After replacing an axial joint or a ball joint, reset the toe-in, otherwise the front tyres wear unevenly. At the back there are drawbars, and for the driver there are seats.

Finding the right part and related models

Locate the data plate and compare the reference number on the old part with the details on the product. On many parts for these tractors, a wire brush will make a worn number readable again.

In the Ford 10 series, the 6810 sits alongside several other models, and each of them has a page here with parts matched to that tractor:

For every other Ford tractor, carry on through Ford parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart