Menu
EUR

Renault 75-32 tractor parts & technical data

There is no need to hunt for Renault 75-32 parts one by one. This page shows more than 100 of them for the R series, including trailer couplings and lighting.

103 parts found for Renault 75-32
Show:
GRANIT Silencer Renault 75-32 - 90-34, 850-904
5%
GRANIT
Silencer Renault 75-32 - 90-34, 850-904
€323,61 €267,45 €307,40 €254,05
 
GRANIT Stop cable A 1620 mm, B 1445 mm Renault
GRANIT
Stop cable A 1620 mm, B 1445 mm Renault
A: 1620 mm. B: 1445 mm.
€27,65 €22,85
 
GRANIT Seal kit upper 1 cylinder ZKD 1,15 mm MWM D 226, TD 226, TD 228
5%
GRANIT
Seal kit upper 1 cylinder ZKD 1,15 mm MWM D 226, TD 226, TD 228
€35,61 €29,43 €33,80 €27,93
 
GRANIT Injection nozzle Renault Ceres 65-95, 58-12 - 133-54
5%
GRANIT
Injection nozzle Renault Ceres 65-95, 58-12 - 133-54
Type formula: BDLL150S6741CF, 0433272007.
€43,86 €36,25 €41,65 €34,42
 
GRANIT Aircon compressor 12 V, pulley Ø 152 mm, 2 grooves, EM Renault
5%
GRANIT
Aircon compressor 12 V, pulley Ø 152 mm, 2 grooves, EM Renault
Fixing: EM | Pulley Ø (mm): 152 | Suitable oil: PAG 46 | Oil quantity (ccm): 200...
€568,46 €469,80 €540,00 €446,28
 
GRANIT Starter ring gear Ø 350/317 mm, 115 teeth Renault
5%
GRANIT
Starter ring gear Ø 350/317 mm, 115 teeth Renault
Version: Ø 350/317 mm, 115 teeth.
€319,32 €263,90 €303,35 €250,70
 
GRANIT Radiator hose, bottom inner-Ø 37 mm Renault 58-32 - 106-54
GRANIT
Radiator hose, bottom inner-Ø 37 mm Renault 58-32 - 106-54
Inner Ø: 37 mm.
€75,25 €62,19
 
Radiator hose, top thermostat inner-Ø 35 / 38 mm Renault
5%
Radiator hose, top thermostat inner-Ø 35 / 38 mm Renault
Inner Ø: 35 / 38 mm.
€43,61 €36,04 €41,40 €34,21
 
Thrust bearing standard Ø 65 mm Fendt, Renault
Thrust bearing standard Ø 65 mm Fendt, Renault
Dimensions: Ø 65 mm.
€114,65 €94,75
 
Oil pump line-Ø 30 mm Case IH, Renault, Steyr, Fendt
5%
Oil pump line-Ø 30 mm Case IH, Renault, Steyr, Fendt
Dimensions: Pipe Ø 30 mm.
€431,57 €356,67 €409,95 €338,80
 
GRANIT Outlet valve engine MWM D 226, D 227 Renault
GRANIT
Outlet valve engine MWM D 226, D 227 Renault
€24,55 €20,29
 
Stabilizer strut 585 mm, Ø 22 mm Renault
5%
Stabilizer strut 585 mm, Ø 22 mm Renault
d: 22 mm. L: 585 mm. Dimensions: Length = 585, Ball Ø = 22 mm.
€257,75 €213,02 €244,85 €202,36
 
Angle drive engine side M18 x 1,5, clockwise rotation - right
5%
Angle drive engine side M18 x 1,5, clockwise rotation - right
€131,53 €108,70 €124,95 €103,26
 
GRANIT Stop cable 1445 / 1620 mm Renault 58-12 - 106-54, 850-954
GRANIT
Stop cable 1445 / 1620 mm Renault 58-12 - 106-54, 850-954
To fit as: Renault 58-12, 58-14, 65-12, 65-14, 70-12, 70-14, 75-12, 75-14, 80-12...
€27,65 €22,85
 
MAHLE Alternator 14 V, 65 A, pulley-Ø 90 mm Lindner, Massey Ferguson, Renault
38%
MAHLE
Alternator 14 V, 65 A, pulley-Ø 90 mm Lindner, Massey Ferguson, Renault
Nominal voltage (V): 14 | Pulley spacing (mm): 32,5 | Direction of rotation: ↻ |...
€282,61 €233,56 €176,60 €145,95
 
GRANIT PTO shaft end piece 1 3/8 inch, 6 splines, 295 mm, 1000 rpm Renault
5%
GRANIT
PTO shaft end piece 1 3/8 inch, 6 splines, 295 mm, 1000 rpm Renault
Version: Length 295 mm, 1 3/8", 6 splines, 1000 rpm.
€274,34 €226,73 €260,60 €215,37
 
Connecting rod bolt Fendt, Renault
Connecting rod bolt Fendt, Renault
€37,50 €30,99
 
Exhaust pipe Renault Ceres 85-954
Exhaust pipe Renault Ceres 85-954
€175,70 €145,21
 
O-ring oil pump Renault
O-ring oil pump Renault
€13,70 €11,32
 
Showing 73 - 96 of 103

Renault 75-32 parts for engine rebuilds, hydraulics and the hitch

A Renault 75-32 from the R series stays at work because someone keeps spanners on it. Plenty of owners rebuild the engine themselves, replace the hydraulic pump or swap in a better seat. For jobs like these, this page has more than 100 new replacement parts that fit the Renault 75-32, from GRANIT, Walterscheid, GRAMMER, ROCKINGER and Bosch/Rexroth. They are aftermarket parts rather than dealer stock, and they keep an older tractor going for years.

Engine bearings and injection

For the bottom end there are connecting rod bearings and main bearings. Injection nozzles cover the fuel side, and there is a stop cable for shutting the engine down. The cooling system gets radiator hoses, such as the top hose at the thermostat, and V-belts for engine cooling.

Before you order bearings, measure the crankshaft journals with a micrometer. If the crank has been reground at some point, you need undersize shells, and a standard bearing will not do. The back of the old shells is often stamped with the size. After fitting, check the running clearance with Plastigage and oil the shells generously during assembly.

When you fit an injection nozzle, always use a new copper sealing washer under it. The old washer has been crushed and will not seal properly, so combustion gas blows past and the nozzle seizes in the head, which turns the next removal into a long job.

Hydraulics, linkage and steering

  • A Bosch/Rexroth double pump for the hydraulic system
  • Stabilizer struts and spindles for the three-point linkage
  • Steering ball joints for the front axle
  • Tubes for pipework

Hitch and seat

For hitching there are drawbars with a ball, top drawbars and flange hitches. In the cab, an air suspended GRAMMER tractor seat can replace the old one, which makes a real difference on an older tractor with stiff suspension.

Related R series models

Renault's R series includes many closely related models, so read the serial plate and compare the old part with the product description. Separate pages exist for the Renault 65-12, Renault 65-32, Renault 68-12, Renault 70-12, Renault 75-12 and Renault 681, which helps if you look after more than one Renault. The 77-12 and the 85-34 also belong to this line. Every other Renault tractor in our range can be reached via Renault parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart