Web Analytics
Deutz-Fahr Intrac 2003 tractor parts - Techniek Totaal
Menu
EUR

Tractor parts Deutz-Fahr Intrac 2003

Looking for parts for your Deutz-Fahr Intrac 2003 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

135 Products
Show:
Alternator 14 V / 65 A - Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€166,56 €137,65 €158,23 €130,77
You save 5%
 
GRANIT Brake shoe hand brake Deutz D-series, 05, 06-series
GRANIT
To fit as: Deutz D 25, D 30, D 40, D 80, 2505, 2506, 3005, 3006, 4005, 4006, 4506, 5005, 5006, 5206, 5505, 5506, 6006, 6206, 7006, 7206, F2L 514, D15,... More
To fit as: Deutz D 25, D 30, D 40, D 80, 2505, 2506, 3005, 3006, 4005,...
€69,82 €57,70 €66,33 €54,82
You save 5%
 
GRANIT Piston set, complete 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm
GRANIT
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€136,83 €113,08 €145,76 €120,46
You save -7%
 
Alternator
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€169,48 €140,07 €161,01 €133,07
You save 5%
 
GRANIT Cylinder head With valves
GRANIT
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€258,94 €214,00 €225,64 €186,48
You save 13%
 
GRANIT Start switch 12 V, pull switch
GRANIT
To fit as: Case IH D 212, 214, 215, 217, 219, 320, 322, 324, 326, 430, 432, 436, 439, 440, Deutz-Fahr D06 2506, 3006, 4006, 4506, 5006, 5206, 5506, 60... More
To fit as: Case IH D 212, 214, 215, 217, 219, 320, 322, 324, 326, 430,...
€48,76 €40,30 €46,27 €38,24
You save 5%
 
GRANIT Spring for shift rod Deutz D25.2, D30, D30S, 2505, 3005, 4005
GRANIT
To fit as: Deutz D 25.2, D 30, D 30 S, 2505, 3005, 4005 More
To fit as: Deutz D 25.2, D 30, D 30 S, 2505, 3005, 4005
€4,35 €3,60 €4,13 €3,41
You save 5%
 
GRANIT Diaphragm feed pump For in-line injection pump
GRANIT
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€25,95 €21,45 €24,65 €20,37
You save 5%
 
GRANIT Replacement key Set, 2 off
GRANIT
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€11,31 €9,35 €10,74 €8,88
You save 5%
 
GRANIT Fuel tank cap with ventilation, lockable <br>
GRANIT
Filler neck Ø: 106 mm. More
Filler neck Ø: 106 mm.
€24,20 €20,00 €22,99 €19,00
You save 5%
 
GRANIT Ignition switch With 2 keys
GRANIT
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 mm + 6.3 mm. Mounting Ø: 26 mm. Fixing: Fastening nut brass. Nominal voltage: 1... More
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 ...
€42,41 €35,05 €40,29 €33,30
You save 5%
 
GRANIT Starter 12 V / 2.7 kW - Nominal voltage: 12 V, Nominal power: 2,7 kW, No. of pinion teeth: 9
GRANIT
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Holes / PCD (mm): 3 x 10,7 / 127,0 | Spacing flange to flywheel (mm): 28,... More
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teet...
€270,12 €223,24 €251,10 €207,52
You save 7%
 
FLEETGUARD Fuel filter FF5018
€10,35 €8,55 €9,83 €8,12
You save 5%
 
GRANIT Connecting rod bush Ø 35 mm
GRANIT
Dimensions: Ø 35 mm. More
Dimensions: Ø 35 mm.
€6,32 €5,22 €6,00 €4,96
You save 5%
 
Walterscheid Inner part
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€948,04 €783,50 €793,03 €655,40
You save 16%
 
LUK Guide bearing
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€33,46 €27,65 €31,79 €26,27
You save 5%
 
GRANIT Brake drum for brake pad, 60 mm wide
€282,05 €233,10 €256,93 €212,34
You save 9%
 
GRANIT PTO shaft end piece
GRANIT
Version: Length 225 mm. Notes: If the old version with Ø 35 mm is installed, the sealing ring 595038X052X07 SL and the cover 66002384203 must also be... More
Version: Length 225 mm. Notes: If the old version with Ø 35 mm is ins...
€597,49 €493,79 €503,58 €416,18
You save 16%
 
Walterscheid Ball hitch Flange version with rotation lock
Walterscheid
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-value: 82,4 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Description: The dim... More
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-va...
€1.500,40 €1.240,00 €1.255,09 €1.037,26
You save 16%
 
GRANIT Rubber sleeve
€4,60 €3,80 €4,37 €3,61
You save 5%
 
GRANIT Sealing ring for push rod tube
GRANIT
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€1,21 €1,00 €1,15 €0,95
You save 5%
 
GRANIT Brake lining for hand brake 30 x 4 x 190 mm 7 holes Deutz D15, D15.1, D22, D150, D160, D 180, D25, D270, D 177, D400 B
GRANIT
To fit as: Deutz D 15, D 15.1, D 22, D 150, D 160, D 180, D 25, D 270, D 177, D 400 B More
To fit as: Deutz D 15, D 15.1, D 22, D 150, D 160, D 180, D 25, D 270,...
€14,91 €12,32 €14,16 €11,70
You save 5%
 
GRANIT Flame glow plug
GRANIT
Version: 9.5 V, 20 A, thread M20 x 1.5. To fit: Deutz. More
Version: 9.5 V, 20 A, thread M20 x 1.5. To fit: Deutz.
€68,73 €56,80 €65,29 €53,96
You save 5%
 
GRANIT Pressure pin
GRANIT
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€18,68 €15,44 €17,75 €14,67
You save 5%
 
Showing 1 - 24 of 135

Parts for your Deutz-Fahr Intrac 2003 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2003. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2003. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2003. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Guide width
Connecting pin
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart