Menu
EUR

Deutz D3607 tractor parts

Do you need parts for your Deutz D3607 oldtimer tractor? In this category you’ll find all parts that fit this oldtimer tractor.

181 parts found for Deutz-Fahr D 3607
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €167,35 €138,31
You save 9%
Silencer vertical 1130 mm, Ø 57/45 mm Deutz-Fahr
Version: Length: 1130 mm, Inner Ø: 57 mm, Outlet Ø: 45 mm. More
Version: Length: 1130 mm, Inner Ø: 57 mm, Outlet Ø: 45 mm.
€109,09 €90,16 €99,30 €82,07
You save 9%
GRANIT Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
GRANIT
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€58,43 €48,29 €53,20 €43,97
You save 9%
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm. More
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€46,40 €38,35 €42,20 €34,88
You save 9%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€288,40 €238,35 €262,55 €216,98
You save 9%
Hydraulic steering stroke 320 mm
To fit as: Deutz, International, Fendt More
To fit as: Deutz, International, Fendt
€2.224,27 €1.838,24 €2.024,95 €1.673,51
You save 9%
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€197,74 €163,42 €180,00 €148,76
You save 9%
BOSCH Start switch pull switch with gear change knob, Ø 10,5 mm
BOSCH
Version: Galvanised steel housing, including black control button, Power rating:, 50 A / 12 V, (terminals 17, 19), 27 A / 24 V (terminals 17, 19), 12 ... More
Version: Galvanised steel housing, including black control button, Pow...
€69,57 €57,50 €58,95 €48,72
You save 15%
GRANIT Replacement key lock number 14610 - 2 pieces
GRANIT
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€15,00 €12,40
LED headlight dipped beam / main beam / marker light, 140 x 140 x 88 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam/full beam/position light. Installati... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€104,21 €86,12 €94,85 €78,39
You save 9%
Hydraulic steering stroke 320 mm Fendt, Case IH, Deutz-Fahr
€2.224,27 €1.838,24 €2.024,95 €1.673,51
You save 9%
GRANIT Piston set, complete Ø 100 mm, combustion chamber 55 mm
GRANIT
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€152,40 €125,95 €138,70 €114,63
You save 9%
Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 57.9 mm. Menke no.... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€644,58 €532,71 €586,80 €484,96
You save 9%
Steering column switch built-in, shift linkage 126 mm, blade terminal 8-pin
Version: Mounting, functions: indicators, horn, dipped beam/full beam changeover, headlight flasher, lever 126 mm long, blade terminal connection, 8-p... More
Version: Mounting, functions: indicators, horn, dipped beam/full beam ...
€76,69 €63,38 €69,80 €57,69
You save 9%
Track rod 967 - 1400 mm, taper 12 - 14 mm, M16 x 1,5 Deutz-Fahr
G (mm): 12 - 14 | D (mm): M10 x 1,25 | E (mm): 26 | Dimensions (mm): Taper = 12-14, length = 970-1400 | B (mm): M16 x 1,5 | C (mm): 12 - 14 | Thread: ... More
G (mm): 12 - 14 | D (mm): M10 x 1,25 | E (mm): 26 | Dimensions (mm): T...
€126,84 €104,83 €115,45 €95,41
You save 9%
GRANIT End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
GRANIT
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 25 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5. Description: Th... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€577,76 €477,49 €525,95 €434,67
You save 9%
GRANIT Radiator grille Deutz-Fahr Series 07-07C, D 2807-7807C
€412,94 €341,27 €375,90 €310,66
You save 9%
O-ring feed pump Ø 38 x 3 mm Deutz engine F3L812D-F6L912W
To fit as: Deutz engine F3, 4, 5, 6L 912, 913W/T, F2L912 bj. 3/84, F3L812D, F3L913, F4L812D, F4L912W, F5L912, F5L912W, F5L912D, F6L812D, F6L912, F6L91... More
To fit as: Deutz engine F3, 4, 5, 6L 912, 913W/T, F2L912 bj. 3/84, F3L...
€7,65 €6,32
GRANIT Double clutch DoT 225 36 x 40 mm, 20 splines Deutz-Fahr
GRANIT
Additional information: Made in Germany | Dimensions (mm): 36 x 40, 20 grooves | Flywheel design: Flat More
Additional information: Made in Germany | Dimensions (mm): 36 x 40, 20...
€670,72 €554,31 €610,60 €504,63
You save 9%
GRANIT Steering valve ew/dw 220 bar, 60 l/min, system SD60 Deutz
GRANIT
This control valve has been specially developed for Deutz tractors with SD60 hydraulics. Thanks to the high output up to four pieces can be flanged di... More
This control valve has been specially developed for Deutz tractors wit...
€663,73 €548,54 €604,25 €499,38
You save 9%
GRANIT Temperature warning switch 12 V, M10, flat head
GRANIT
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€108,59 €89,74 €98,85 €81,69
You save 9%
GRANIT Start switch 12 V pull switch, built-in Ø 10,5 mm, 0-1-2
GRANIT
Menke no.: 248055 | Switching stages: 0-1-2 | Version: Pull switch Protected against dripping water when installed vertically Mounting opening Ø 10.5... More
Menke no.: 248055 | Switching stages: 0-1-2 | Version: Pull switch Pro...
€60,30 €49,83
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
€19,15 €15,83
GRANIT Cylinder head Deutz-Fahr
GRANIT
Engine types: BFL913, BFL913T. More
Engine types: BFL913, BFL913T.
€296,24 €244,83 €269,65 €222,85
You save 9%
Showing 1 - 24 of 181

Deutz D3607 oldtimer tractor parts

For the Deutz D3607 oldtimer tractor, you'll find a wide selection of parts in our shop. From engine and fuel system components to metal body parts like hoods and fenders – we’ve got what you need. Popular parts include the seat, headlights, taillights, steering wheel, and various electrical components. Many parts are shared with other models in the Deutz 07 oldtimer series. All parts for this type can be easily found and ordered in our webshop.

Technical specs Deutz D3607

The Deutz D3607 was produced between 1978 and 1982 and features a 3-cylinder air-cooled F3L912 diesel engine with a displacement of 2.7 liters. It delivers approximately 36 hp. The original color is Deutz green (RAL 6018) with grey accents.

Still need parts for your Deutz D3607 oldtimer tractor? Simply order them through the Techniek Totaal webshop. Use the categories or search by part number to quickly find what you need. Need help or can’t find a specific part? Our customer service is happy to assist you.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart