Web Analytics
Deutz-Fahr Intrac 2003 tractor parts - Techniek Totaal
Menu
EUR

Up to 20% spring discount!

Get up to 20% discount now on all parts, consumables, tools and fasteners.

Tractor parts Deutz-Fahr Intrac 2003

Looking for parts for your Deutz-Fahr Intrac 2003 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

142 Products
Show:
GRANIT Sealing ring for piston
GRANIT
Dimensions: 84 x 3 mm. More
Dimensions: 84 x 3 mm.
€12,11 €10,01 €10,95 €9,05
You save 10%
 
 
GRANIT Clevis for lower link lifting rod bottom part right and left
GRANIT
Dimensions: Length = 260, Ø = 16, Thread = M22 x 2 mm. More
Dimensions: Length = 260, Ø = 16, Thread = M22 x 2 mm.
€154,73 €127,88 €139,92 €115,64
You save 10%
 
 
GRANIT Clevis for lower link lifting strut bottom part right and left
GRANIT
Dimensions: Length = 260, Ø = 20, Thread = M22 x 2 mm. More
Dimensions: Length = 260, Ø = 20, Thread = M22 x 2 mm.
€78,65 €65,00 €71,12 €58,78
You save 10%
 
 
Walterscheid Shunting coupling
Walterscheid
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. Trailer load: 25000 kg. No. of holes: 4. Description: Towing coupling... More
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colo...
€254,35 €210,21 €230,01 €190,09
You save 10%
 
 
GRANIT Vpe100 Niete (kupfer), 100 pcs
GRANIT
Hole Ø: 6 mm. Length: 12 mm. d2: 11,5 mm. K: 1,2 mm. e: 3 mm. Material: Copper. DIN: 7338-B. More
Hole Ø: 6 mm. Length: 12 mm. d2: 11,5 mm. K: 1,2 mm. e: 3 mm. Materia...
€40,71 €33,64 €36,81 €30,42
You save 10%
 
 
HELLA Oil pressure switch For engine, break contact
HELLA
Version: Thread: M10 x 1 tapered, Switching pressure: 0.15-0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: black. Colour: Black. Pressure range: 0... More
Version: Thread: M10 x 1 tapered, Switching pressure: 0.15-0.45 bar, B...
€14,89 €12,31 €12,71 €10,50
You save 15%
 
 
GRANIT Replacement key Set, 2 off
GRANIT
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€10,31 €8,52 €9,32 €7,70
You save 10%
 
 
GRANIT Ignition switch With 2 keys
GRANIT
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 mm + 6.3 mm. Mounting Ø: 26 mm. Fixing: Fastening nut brass. Nominal voltage: 1... More
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 ...
€35,11 €29,02 €31,75 €26,24
You save 10%
 
 
HELLA Spring For main headlights
€23,07 €19,07 €19,70 €16,28
You save 15%
 
 
GRANIT Intermediate piece rear
€34,84 €28,79 €31,51 €26,04
You save 10%
 
 
HELLA Relay Working current (make contact)
HELLA
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€17,83 €14,74 €15,22 €12,58
You save 15%
 
 
GRANIT Strainer
€7,01 €5,79 €6,34 €5,24
You save 10%
 
 
GRANIT PTO shaft end piece
GRANIT
Version: Length 225 mm. Notes: If the old version with Ø 35 mm is installed, the sealing ring 595038X052X07 SL and the cover 66002384203 must also be... More
Version: Length 225 mm. Notes: If the old version with Ø 35 mm is ins...
€552,91 €456,95 €499,99 €413,21
You save 10%
 
 
Walterscheid Ball hitch Flange version with rotation lock
Walterscheid
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-value: 82,4 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Description: The dim... More
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-va...
€1.545,36 €1.277,16 €1.247,21 €1.030,75
You save 19%
 
 
VICTOR REINZ Crankshaft sealing ring Front, Ø 65 x 85 x 10.5 mm
€34,03 €28,12 €30,77 €25,43
You save 10%
 
 
GRANIT Main bearing Standard Ø 70 mm
GRANIT
Engine types: FL812, FL912. Dimensions: 4. More
Engine types: FL812, FL912. Dimensions: 4.
€13,06 €10,79 €11,81 €9,76
You save 10%
 
 
GRANIT Control unit This control valve is used in the tractor for controlling the power lift unit. It can also be used to lift and lower implements continuously, to maintain a predetermined position, or to achieve optimum utilisation of the tractor power. Distur
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 57.9 mm. Menke no.... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€749,45 €619,38 €615,06 €508,31
You save 18%
 
 
Bosch/Rexroth Hydraulic pump Anticlockwise
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€370,84 €306,48 €335,35 €277,15
You save 10%
 
 
GRANIT Gasket for power lift housing
GRANIT
Dimensions: 240 x 300 mm. More
Dimensions: 240 x 300 mm.
€59,66 €49,31 €53,95 €44,59
You save 10%
 
 
GRANIT Relay Make contact
GRANIT
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€7,12 €5,88 €6,44 €5,32
You save 10%
 
 
HELLA Lens Left and right - 2 pcs - Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399
HELLA
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399 More
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399
€27,27 €22,54 €23,28 €19,24
You save 15%
 
 
GRANIT Tension spring Brake shoe Deutz 3006, 4006, 5206, 6206
GRANIT
To fit as: Deutz 3006, 4006, 5206, 6206 More
To fit as: Deutz 3006, 4006, 5206, 6206
€3,84 €3,17 €3,47 €2,87
You save 10%
 
 
Showing 121 - 142 of 142

Parts for your Deutz-Fahr Intrac 2003 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2003. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2003. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2003. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart